And so it begins.... (My adventures into Alox!)
-
How about white liners on that
we can call it the humbug. -
Here's a regular old pioneer tool layout, dressed in white, with a black liner and screws.




-
JR -
sexy!

-
Wow the white/black look was very popular. I sold all the white scales I had made up (only did 5 sets), so I'm prepping a larger batch to send down for the magic white coating. I think the white scales / black tools trial was a success and it will be something I regularly offer in a mod now.
Now the other thought I had was what to do with all the 91mm blade and opener layers from the donor climbers I have. I was getting climbers for 20 bucks or so and just using the scissors out of them, but then I have the rest as brand new parts just not too exciting to do much with.
I dont think selling spartans or tinkers on their own is very exciting to anyone. But then I thought I could toss in those stainless parts in a BO run and also hard anodize the regular Al liners, so I could then have 10 new spartans with black tool layers and liners. The cost to make them would be very small, but they might be somewhat interesting at least, and I could price them reasonably. I suppose if noone wanted them though I could just give them away with mods I do as a little perk as well.
Anyways.. I think that's what the next experiment will be. :D
-
...... hard anodize the regular Al liners.......
Brass coloured anodized Al liners maybe??? It would be a lot cheaper then actually cutting and using brass but would give it a feeling of quality. Failing that I would say red liners with BO tools.
Oh good point actually, red liners would match the stock scales nicely.
-
...... hard anodize the regular Al liners.......
Brass coloured anodized Al liners maybe??? It would be a lot cheaper then actually cutting and using brass but would give it a feeling of quality. Failing that I would say red liners with BO tools.
Oh good point actually, red liners would match the stock scales nicely.
:D One from my camp. Red and black just go well together.

-
...... hard anodize the regular Al liners.......
Brass coloured anodized Al liners maybe??? It would be a lot cheaper then actually cutting and using brass but would give it a feeling of quality. Failing that I would say red liners with BO tools.
Oh good point actually, red liners would match the stock scales nicely.
You didn't mention springs but I guess they would need to be BO too. If postage is good then I am in for a tinker, been thinking I need a philips.
-
I wonder how the DSAK or Endor Farmer would look with red liners

-
@HeXeY said:
I wonder how the DSAK or Endor Farmer would look with red liners
I know I thought the same.. I was out of red or I would have tried. For some reason getting my red order correct has been a nightmare. Its going on the 3rd try this week. I think he must have changed something in his process since the SAK scales havent changed. The last 2 times the anodize was not smooth over all the surface. I hope it works this time!
-
Color me very interested in two or three BO/HAIII models! Relatively mass produced Syph models would be a dream.
As a Red and Black University of Georgia Alum, I approve of your plans!
-
Well since I have new parts that I essentially part value at $0 (climbers and super tinkers minus scissors), I think I could get the cost down to around $40 - 45 depending on how many I could get done for one batch of BO, and hard anodize. Labor for assembly should only be 20 minutes to peen together a 91. Although I think I would have to edge polish the Al liners for the red to come out nice.. so thats a bit more.
The black oxide on stainless costs almost double what the hard anodize does on Al. For the first batch of BO I only ran enough for 8 SAKs worth and it worked out to around or just under $20 for BO on one SAK. It would at least make them more interesting than stock spartans and tinkers though, so I think its worth a little experiment.
-
You know, this is a slippery slope to a new market for you... BO/HAIII Huntsman, Compacts, et all would be huge for you! Your secondary stream of income could increase quite a bit!
Your offerings could be some standard models and then custom models. Hmmm- have you thought of hiring some local kids part time to help speed up the process? They could assemble the standard models, while you focus on the more engaging customs.
What about having a Kickstarter (Maybe need to use Indiegogo in Canada) to raise some capital for new equipment? There would be tax implications, but as long as you had more expenses than revenue, it would work out. Maybe you don't want to make it such a "pro" operation- more of a hobby with benefits.
Actually these BO/HAIII spartans would be a perfect entry level reward for such a Kickstarter. Higher levels could have higher level knives. Basically filling up your mod dance card in advance. To avoid the Eye of Elsener, the mods would strictly be rewards for pledges, not for sale in the Kickstarter. Raising money for equipment would be the stated goal.
Based on some comments you have made elsewhere about your "normal" career, I expect you have already considered these issues. :p
-
I need to teach my wife to peen.. lol. I almost had her convinced to cut some brass liners for me, but she wouldnt give it a try. :D But really I dont want to ramp up making 91mm mods until I can make alox scales for them. Making cool SAKs with no plastic parts on them is my true mission! I just want to find a use for all the new parts that are sitting idle and lonely in my parts boxes, and its fun to try new things.
-
Do you have a roadmap for fabbing up some 91mm checkered (or otherwise) 91mm scales? I know there was a bit of brainstorming in the past (and PTR did make some), but I am not aware of any forward momentum.
Maybe +B has cracked the code?
-
@papercut said:
Do you have a roadmap for fabbing up some 91mm checkered (or otherwise) 91mm scales? I know there was a bit of brainstorming in the past (and PTR did make some), but I am not aware of any forward momentum.Maybe +B has cracked the code?
Step 1. Buy Mill
Step 2. CNC convert it
Step 3. Machine scales!I already have the model made up in CAD. And I am FINALLY doing step one today.. in 1 hour actually. Just called and I can go over and buy my mill! Im debating 2 different models, one is slightly less expenseive, and also easier to CNC, so it feels like there is a catch.. but he says its very good still so... I have some quick reading to do.
Its between these two...
The sieg has more aftermarket parts,.. but he has a ready to go kit to CNC the other one....
So its tough call... but I will read some reviews then inspect both machines well.
-
Hehe
fun!
-
-

Me want one. Badly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
