Surge Owners Club
-
You mean this thread:
@baja820 said:
Surge. wait. Scratch that.Surge 300

Jeez; ya' make me look for it and all I got was this picture postcard perfect photo of your work. That's it?! :D
Very nice work, actually. Do you like it better now modded with the ST200 plier head.
Well, [sigh] I guess the rest of us won't have TOO long to wait now... >:(
-
This one.
</topic/44999Thanks for the complements!
I love the surge with the 300 jaws. I can't imagine it any other way. -
@kkokkolis said:
I just bought some Bosch compatible jigsaw blades. As already mentioned by others, they are almost half compared to the Leatherman saws. Can anyone explain his solution for minimizing blade play? Pictures are much welcomed!
Thanks.@zoidberg said:
Heat shrink. Works great for me. Sorry, was gonna take some pics for you today but forgot.Done in a rush but you should be able to get the idea.
-
I bought a set of generic blades and tried them. They are good for saving the included ones, but they aren't really faster than them. So, I decided to buy 3 genuine Bosch blades for fast cutting of
- Metal
- Plastic
- Wood
Could somebody please recomend the specific product numbers for genuine Bosch jigsaw blades?
-
T123X for metal and T101B for wood. Too long for the tool to close but as loong as the sheath/that little sleeve can take.
Always buy blades that cut on the pull stroke and not too aggresive, your hand have much less power than a jigsaw.PS. Metal blade is just perfect for plastic and I havent found any ceramic blad that would actually work, so after a lot of testing I came down to a file in the tool and two of each mentioned blades in the sheath. Hope that helps.
-
Thanks! You suggest these:

Specifications: T123X
Type Progressor for Metal
Teeth Per Inch 10-24 progressive
Overall Length 4"
Type of Cut Fast cuts and long life
Quantity 5
Application Thin metal, pipes and metal profiles, sheet metal up to 8 gauge, metal 5/64"-3/8", stainless steel 1/16"-1/8", non-ferrous metal 5/64"-3/4", plastics 1/16"-1-1/4", fiberglass 3/64"-3/4"
Tooth Design Side set and ground
Material High Speed Steel
Working Length 3"
Blade Thickness 0.04"
Blade Height 0.34"
*Note If cutting metal, use cutting oil to cool blade. Use only with GCFI-protected outlets or adapters
Specifications: T101B 5 Pieces 4 In. 10 Variable Gullet TPI Clean for Wood T-Shank Jig Saw Blades
Type Clean for Wood
Teeth Per Inch 10 variable gullet
Overall Length 4"
Application Hard/soft woods, plastics, OSB, plywood, laminated particle board 3/16"-1-1/4"
Type of Cut Straight, fine cuts
Quantity 5
Tooth Design Ground teeth and taper ground back
Material High Carbon Steel
Working Length 3"
Blade Thickness 0.06"
Blade Height 0.28" -
People will do anything to make their Surge lighter! :ahhh
:D
Interesting looking mod. Got any pictures how you made it?
-
@baja820 said:
This one.
</topic/44999Thanks for the complements!
I love the surge with the 300 jaws. I can't imagine it any other way.I can see that reasoning. Another reason to look forward to the new model. I don't need to go into cryo-stasis or anything, but needless - I am looking forward to August .
At any rate - not to go too off-topic on the mod...why did you break the lock bars? [This question from someone who obviously hasn't taken apart any of his LM's...] ::)
-
That bottle opener is cool. Is the en portion a blade or an awl?
-
@ kkokkolis
-
Impressive!
-
Just to give you something that works.
When new surge comes out it will be perfect. Tool you don't have to "save" from cutting wire, nails or wood. Finally all the parts most likely to wear/break can be raplaced :) -
Any news on release dates? We are dying here...

-
@enki_ck said:
People will do anything to make their Surge lighter! :ahhh:D
Interesting looking mod. Got any pictures how you made it?
No pics of the process sorry.
@zoidberg said:
All up it took a few hours, a smurf file, a mill file, couple of round files, a vice and a hacksaw that was no help. If I was to do it again, I would use a grinder and dremel etc and just make one awl to rule them all.This one.
</topic/44999Thanks for the complements!
I love the surge with the 300 jaws. I can't imagine it any other way.I can see that reasoning. Another reason to look forward to the new model. I don't need to go into cryo-stasis or anything, but needless - I am looking forward to August .
At any rate - not to go too off-topic on the mod...why did you break the lock bars? [This question from someone who obviously hasn't taken apart any of his LM's...] ::)
The ST300 plier head creates a gap, removing them allows the handles to close properly.
Got my "like new but previously enjoyed" ST 300 today! Seems really nice, surprisingly the fit and finish on mine is way better than my Surge, the tools don't feel gritty coming out and the handles unfold smoothly with no gritty feeling at all. Hey, I noticed the plier heads have that little angled raised portion that deactivates the blade safeties on the Surge if you know what I mean. It cams over the little pokey things that keep the blades locked in the closed position when you are using the pliers if that makes any sense. The gist of what I'm saying is that I think these plier heads would work in a Surge, and maybe that is what Leatherman is planning if they made them with that cam surface built into them, as it serves no purpose on the ST 300 that I can see. What do you guys think?

I am sure that they will eventually make there way to most of the tools
but as is the plier head of the ST300 won't allow the Surge to close completely as another of our members here I believe DaveK tried it for fun and the tool won't close all the way but it will only take a little modifying and we will see it on other tools in the current lineup 
I did, and you remember right Poncho

The ST 300 plier heads are basically too wide to allow the Surge to close up properly. Other than that it looks a great idea though!



@evil510 said:
*Hey gang. Here are a few photos of the recent mod.....Supertool 300 plier head installed on Surge.....

Inner spring system removed for clearance, shims installed on handle pivot bolts.....

Close-up of new rivet installed to hold spring for locking tabs.....

Last but not least, fully closed.....

~ evil ~*
@Nhoj said:
That bottle opener is cool. Is the en portion a blade or an awl?Cheers. The end portion is an awl.
-
Nicely done! Beautiful Surge300

-
Anyone happen to know what month of 2005 the surge went into production?
-
@zoidberg said:
At any rate - not to go too off-topic on the mod...why did you break the lock bars? [This question from someone who obviously hasn't taken apart any of his LM's...] ::)The ST300 plier head creates a gap, removing them allows the handles to close properly.
[/quote]Ahh...thank thee. Yes, that does make some sense. Not forayed into modding just yet. Maybe if I had five to ten other LM models, etc., etc.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








