EDC Carry Combo
-
When I started to really think about edc I bought and carried a ton of stuff. Now, a few months later, I've reevaluated what I really need. My keys have a tiny light and a Vic Classic, my large folder usually stays home, and my multitool stays in my bag. The only thing always in my pocket is a cadet.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
i carried a folder (cheapo smith and wesson) and cheapo MT and not much else in the past. I always seemed to feel like i needed more options while away from my vehicle and especially when around sheeple. I now rotate my carry and generally have a MT (new wave or skele or PPP) paired with a SAK as my main blade and either another SAK ( scissors) or a schade oldtimer or crkt toothpick. i have acutally found i like to carry several items paired for situational use like mentioned sheeple friendly blade. the skele and PPP are smallish with the skele just looking cool so no heads turn when ive pulled it out, i dont have a large blade other than whats on the wave or skele. ive found that between the SAK and MT blades im pretty well covered.
-
I have quite a few relatively high-end folders, but for my daily use, the blade on a SAK is usually the better choice. In other words, most of the time I only carry a SAK. I suspect it's more likely the SAK is teamed up with a fixed blade than a dedicated folder.
-
Blast in my bag and SAK adventurer is always on my pocket. I really love the locking blade, philips sd and slim profile combination of the adventurer. I think it is the best SAK for my daily urban life.
-
I actually mostly carry a not-too-wide SAK (max 3 layers) besides a MT for blade, especially if the MT doesn't have outside opening blades. Just because it's easier to get to my SAK blade, than to get my Rebar (or MP400, or anything like it) and have to fold it open to get the blade.
-
I've experimented with a few combos in the past. Usually a leatherman wave/charge, or just a liner lock folder along with a swisschamp. After a while though i pretty much just go with the swisschamp. Usually in the black clip case. As a few others have said a full sized multi is usually near by anyhow. The swisschamp is a bit big for pocket carry but i just cant seem to leave the thing alone. It really handles almost anything i run into on a daily basis, from personal grooming to fixing a tv wall mount or more recently assembling a new filter/pump and opening the pool for the summer!

-
@Joe58 said:
Theron - you also mentioned the SwissTool blades aren't up to snuff for your needs. May I ask what you've found that a PM2 will handle as compared to the SwissTool or is it just a matter of staying sharp longer. The Vic blades will get wicked sharp IMHO but do not hold an edge that well if working like on cardboard, wood, something like that.I find other users experiences interesting and a valuable knowledge base.
Thanks!
Joe
Edge retention like you said. I cut a lot of taped up cardboard and plastic, so the upkeep on the softer steel gets tedious. Plus like some others have said, a better steel would help prevent the drivers from torqueing so easily.
-
I always have my banged up sapphire Classic with me, currently on my keys with a lobster clasp. But I love my slipjoints too. Currently rotating a Carbon No, 8 Opinel, a yellow PE Pacific Salt, a Svord Peasant knife, and a Case yellow Trapper.
-
Combos are great! Here's an example of a typical combo for me and why I might carry it:
Wenger Traveller: Perfect sized pocket SAK, and doesn't upset folks who might otherwise be startled by a knife, plus locking screwdriver and serrated scissors can be less frustragint in some circumstances
**Byrd Tern/Wings Slipit:**Dedicated clipped OHO folder for when needing a knife when one hand is busy
Modded Gerber MP426: Knifeless multitool which supplements the SAK with OHO pliers, a file, and a 3d Phillips driverThere's other combos I've had a lot of use with in this thread ---> </post/613786>
-
Do you guys find yourself sharpening more since the steel seems to be on the softer side if you deal with cutting tape and cardboard quite a bit?
-
If I find myself doing any prolongued cutting, I'll just give it a light swipe each side occasionally just to keep it maintained and keep the edge straight. I generally prefer ease of sharpening over "super" (annoying) steels.
-
a multi tool and a single blade i prefer;
-solo & skeletool cx
-solo & swisschamp
-bear grylls scout & swisschampetc etc etc
-
I have been considering a Recruit but I am curious about the sharpness of the blade due to working in a warehouse from time to time and I do deal with cutting tape and boxes. It isn't an all the time thing but it does happen from time to time. It's either going with the Recruit or a Craftsman utility knife.
-
If you do a search on here, you'll find a video of a guy doing a cutting test with a Spartan. He starts off doing it as a joke until he discovers it out performs a super steel knife that chipped out on him ... well worth tracking down the vid ;)
-
While mainly sticking with LM products in my EDC (Rebar & Squirt S4; KF4 & S4 or Micra etc), I've been known to change it up and swap the S4 for a Climber (one of the two SAKs that I own) occasionally. I really use scissors a lot daily.
If doing a lot of cardboard cutting, I sometimes sharpen a couple times a day. I carry a Smith's Pocket Pal in my pack.
-
I no longer have a dedicated OHO folder, but I am thinking about remedying that situation soon.
I do have a small CRKT fixed blade that I have been throwing in my back pocket lately. It's super thin so it is not even detectable when sat upon.

Supposed to be a knife for a survival kit or something, but I've found it to be a great 'utility blade' for stuff that would bang up the edge on my typical SAK. Bought it for $5, so I don't care what happens to it.
-
@ToolJoe said:
I have been considering a Recruit but I am curious about the sharpness of the blade due to working in a warehouse from time to time and I do deal with cutting tape and boxes. It isn't an all the time thing but it does happen from time to time. It's either going with the Recruit or a Craftsman utility knife.i bring a recruit with me from time to time and use it for cutting plastic ( like water bottles), zip ties, vinyl screen material, and a few other things i need cut quickly. i am no knife sharpening expert by any stretch of the imagination but if its had a long day of cutting i run across ceramic rods or a quick lap on a diamond sharpener before its next duty call. this has kept it razor sharp and i have found that i really dont need to do it all that often either. there are times where i do ask the little guy to cut 1/4 air hose and in that case ill do as mentioned. i love mine and it hasnt let me down so far.
-
I always have a sak and oho folder...today is an old cellidor lumberjack and Ontario rat 2...consider sak blade more as back up or for the sheeple...otherwise, most if my cutting is out, open, cut, put away...sak comes in handy mostly for the other tools because I only carry a MT on my duty belt.
Sent from my ADR6400L using Tapatalk 2
-
My EDC varies daily, but I always have an MT (PS4, Dime, Explorer Plus, Classic SD, etc.), and a Spyderco or similar locking folder. I could get by just fine with something like the Explorer Plus only, but you never know when you will "need" a locking folder. There was a thread on Bladeforums a while back where a mountain lion chomped on someone's son. He pulled out his Spyderco Caly 3.5 (like the one in my pocket), and stabbed the animal. I will probably never need a locking folder like that, but I would rather carry it and not need it than vice verse.
<a href="http://smg.photobucket.com/user/powerpickle/media/20130507_123140_zpsa76c8df0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://img.photobucket.com/albums/v455/powerpickle/20130507_123140_zpsa76c8df0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Typical knife combo: Spyderco Military and Victorinox Manager.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
