Leatherman QC Fails
-
Leatherman functionality with Victorinox quality... Maybe one day.
Charge AL - file scraping scales, serrated blade catching on scales-blunt.
Surge - cracks where handle material was folded (missaligned handle "butts"), unevenly mashined handle and outside tools edges (uncomfortable to hold).
Rebar - when fully open and squeezed like grabbing something, pliers pivot locks up and becomes very tight.Not sure wheather a QC issue but another Surge after cutting hard wire (coat hanger type) developed a significant play in pliers pivot. It never sheared/got stuck in the cutters. And no damage to the cutters, just "stretched" rivet...
-
Last new leatherman I bought was a Rebar with loose tools, before this was a supertool 300 with the wire stripper ground out too high mis-shaping the can opener. Both tools returned, no complaints with the replacements. However two new tools being defective is too much of a coincidence, sort it out! It seems to me that there is a perceived difference in quality post SUPERTOOL 200.
-
I have to admit, "old" ones I had like the Squirt, Charge Ti, Blast or Kick, gave me so much more confidence than Charge AL, Surge or Rebar. Every single one had something wrong with it. And that cardboard feel in your hand.
I'm still after the usability and ergonomics but I really crave thet fit and finish of the Victorinox.If they cut more corners wit the new Suge I would seriously rethink what I say to people about Leatherman...
-
Not to nitpick but the squirts, Charge Ti, Blast, and kick were all in production at the same time as the AL and Surge. They are all "newer" tools. I have had very similar issues with all of them. The older tools like the original Supertool, PST/PSTII, Pulse, Mini, ST200 and the like, were the sweet gems of the multitool world. Nothing has come close to their fit and finish except the Swisstools. The only Leatherman tools I have had that had no QC issues were all pre-2002. That's not to say that all the tools produced in the 90's were perfect, but in the same breath not all tools produced since 2010 have had poor QC. Leatherman is still a great company, they just need a nudge back to what they used to be.
And to be honest, out of all the ones mentioned in the above post, I have to say the Rebar has the best feel to it. I detest the thin blade stock used in it's construction, but it does remind me of the old Leatherman, at least until you open it up.
I'm a huge fan of the Blast, but even I can concede that it feels much cheaper than even the all metal models.
-
For me last few years with LM are problematic. Maybe I simply look closer after the charm weared off.
The point is, 4 out of 9 LM I had in my hands had some issues, and one of them (rebar) had to be send back straight back from the box... -
I like this thread. Not so much of a "I hate Leatherman" rant, but more of a "Hey Leatherman, love your product but here are a few issues that would be great if you fixed"
-
Exactly +1
-
My serrated blade rubs the handle of my Surge. I tighten it and after a few uses it happens again.
Some bits are impossible to get out of the bit extension without the use of pliers. -
I think there should be a $10,000 USD fine for each bad quality LM that goes out the factory

-
This thread wouldn't be complete without mentioning ...
Juice Can Opener (unfinished)
Juice Wine Assist (ineffective and damages bottles)
Juice Scissors (catching frame and erratic pivot tightness)
Juice Saw (deviating to back of awl on closure)
Juice Awl (unfinished)
Juice flat drivers (ouch, ouch, and ouch again)
Squirt - erratic build, tools (particularly blade) fouling scales on closure
Squirt & Style PS scissors spring
All small tools (IMO) inconsistent peening -
@50ft-trad said:
Juice flat drivers (ouch, ouch, and ouch again)Ya you dont pull them out for no good reason. You really need a flat driver if you want to endure the pain. :D
-
I am a LM fan and I carry a Juice most days, but I have to say that LM could do a better job on the profile of the Juice main blade. It is very inconsistent from one Juice to the next.
-
The juice's down fall is its rivet construction. It's really hit or miss.
Once I replaced the pivots and tensioned it, the blades, drivers and scissors are wonderful.
-
@BigMatt said:
For me last few years with LM are problematic. Maybe I simply look closer after the charm weared off.
The point is, 4 out of 9 LM I had in my hands had some issues, and one of them (rebar) had to be send back straight back from the box...I agree that they have had more issues recently, but I was merely pointing out that all the tools you mentioned are part of the same "era" of tools if you will. To say a tool is "older", most of us here at least think of the PST and Supertool and the like.
-
I got another blow to the Rebar, and was a little pissed cause I wasn't the user to find the flaw. The awl was a center punch for a few holes we needed to make. No hammer was used, but I want to beat the tool now. The awl deployed and the rebar folded up the plier head gets wedged in between the small and large flat driver. Every time its folded up. Such a pain to hear grinding of metal on metal.
My coworker asked me what the tool cost cause he thought he broke it. Told him don't worry. its got a nice warranty I cant wait to use. I should get two new BO PST's in return.
This just sucks. I had high hopes for the tool, being a ST300 fan. -
@Bensasupertool said:
I got another blow to the Rebar, and was a little pissed cause I wasn't the user to find the flaw. The awl was a center punch for a few holes we needed to make. No hammer was used, but I want to beat the tool now. The awl deployed and the rebar folded up the plier head gets wedged in between the small and large flat driver. Every time its folded up. Such a pain to hear grinding of metal on metal.My coworker asked me what the tool cost cause he thought he broke it. Told him don't worry. its got a nice warranty I cant wait to use. I should get two new BO PST's in return.
This just sucks. I had high hopes for the tool, being a ST300 fan.Perhaps you could mod your Wave with Rebar pliers! ;)
-
I got another blow to the Rebar, and was a little pissed cause I wasn't the user to find the flaw. The awl was a center punch for a few holes we needed to make. No hammer was used, but I want to beat the tool now. The awl deployed and the rebar folded up the plier head gets wedged in between the small and large flat driver. Every time its folded up. Such a pain to hear grinding of metal on metal.
My coworker asked me what the tool cost cause he thought he broke it. Told him don't worry. its got a nice warranty I cant wait to use. I should get two new BO PST's in return.
This just sucks. I had high hopes for the tool, being a ST300 fan.Perhaps you could mod your Wave with Rebar pliers! ;)

-
I'm on my way to the post office to send in my Surge. Two weeks after receiving a replacement. I work in a motor trade and had to cut off a split ring of a set of keys. Done it with one hand and there is no damage to the cutters.
Pliers tips are now missaligned and I have some play in the pivot...
I carry a pound of steel on my belt so I can whip out my "toy" and do what needs to be done without worrying. I am soo looking forward the 2013 version...Not mention the embarrasement, it's almost warranty abuse...
-
Just want to add my thoughts - have to say that the first Multitool I ever bought was the original Swisstool over 10 years ago (not counting my SAK Champ that is still 100% perfect after 20 years) and it remains absolutely the benchmark in quality, fit and finish - really unbelievably good quality and snappy and precise in a way that is far far away from my Leathermans' particurlarly their biggest product the Wave.
I have a 12/12 dated Wave that was supplied as a warranty replacement for an older model - the matt finish and thinner stock for the tools together with the uneven stiffness, the way the pliers hang up and gouge on the inner tools, the release buttons are clicky and sticky and just the cheaper overall feel compared to the Vic are slightly annoying but it still remains my favourite EDC due to the shape/feel and most of all the one handed blade opening and overall shape of the main blade.
To echo everyone else if only LM would take a leaf out of Vik's construction quality and overall QC.
My Skeletool is much better and definitely closer to Vik in terms of fit and finish as are all the older Micras I own (3), considering these are low price point, simple tools - their quality and fit is much better than the present Wave.
I guess like every company that grows fast and subsequently outsources much of the production something gives and economies are made, you can take this route so far before gradually your reputation starts to be erroded.
Having said that I remain a huge LM fan and their warranty in my experience is the best I have ever come across in practise.
-
I've only fairly ['06 - ?] recently discovered LM. Always wanted one and the Surge was my first purchase. I've used it pretty hard and extensively and not had any problems with it at all. That is, other than the looseness of the lanyard/clip...which I'm told by LM is by design.
Really love the MUT EOD I got a few years ago. However, I'm on my second issue. I had sent the first one admittedly on something of a technicality -- the plier head didn't really meet for 'finer' work. You could see more than a bit of daylight with the pliers closed. The new model is much better in that regard. Ah, yes - but now I'm having slight issues with the plier head scraping against the body as you're opening & closing. That and the pliers jamming closed on me when wire cutting. So, I've tightened/re-tightened the torx screws...and I guess it's livable. I really don't want to send it in again and I suppose it could be that I've not got the right tension in tightening them there screws.
We'll see. I'm not much of a reference in terms of LM usership going back to early LM days. Having already committed to, though, the new Surge and Raptor...seriously hoping it's all good there - which I'm expecting it to be.
I really love LM as a company too - and on the flipside, I can say I've had absolutely no negative issues with the two OHTs that I bought. So, all is not lost, but I understand perfectly well what you all are saying: QC is everything.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login