Can't decide on new multi
-
Hello, I'm new to the fourm and have to say this looks like the # 1 general source for multi tool info. I the market for a new tool, my old style wave can not take the abuse i give it. I' torn between the Core and SOG powerlock, and while the surge and swiss tools look nice they are more expensive any advice.
-
Welcome to Multitool.org preddan!
In my opinion, all four of the tools you mention are built beefier than the old style Wave you are replacing. But which one is best? We've got members here who will swear by each one. It all depends on who you are, and what you use a multitool for.May I ask, what will you be using your new tool for, and what "abuse" is your old Wave not standing up to?
-
I work as a helper installing all sorts of floors, in addition to doing estimates and deliveries. I bent 2 screwdrivers(fixed now) and cut a nail with the wire cutters leaving them closed shut( fixed with a file). I need beefier needle nose pliers and longer nicer screwdrivers.
I`will use it for all sorts of cutting, carpet, metal flashings on deliveries, coping molding, pulling out the staples and nails with the pliers and other assorted jos.
The Wave is a fine tool that I put through unusual abuse. I am also looking for a prybar to carry with me at all times to avoid bending the screwdrivers. Any advice would be appreciated.
-
Preddan,
I can vouch for the Wave and the SOG. The wave is aestitically more pleasing and has better access to the blades and file and saw. The SOG powerlock I have had longer than the wave. I have used it for everything. I have even used the file to jimmy the lock on an old equipment storage house at my old job when my co-worker lost the keys to the door. I know I should not pry with it but it is one tough mother. The pliers work well too. I have the EOD model in black so it has a blasting cap crimper. I think they make one in black without the crimper too if you are into the "tactical black" thing. For me the black seems to not rust as easily. However, the tools are harder to reach in a hurry because you have to unfold it. The tools are replacable too.
-
@preddan said:
I need beefier needle nose pliers and longer nicer screwdrivers.Although the SOG Powerlock has beefy needle nose pliers, the drivers aren't very long. I highly recommend the Victorinox SwissTool but I don't know how its drivers compare to those on the Core. I don't like the build of the Core but that's mostly subjective. Test them out at a local store since your opinion is the only one that counts in this case!
@preddan said:
I am also looking for a prybar to carry with me at all times to avoid bending the screwdrivers. Any advice would be appreciated.I like these http://www.sharkcorp.com/Sharkgrip/NailPullers.html. Someone else likes them too and they took mine when I wasn't looking.
-
I highly recommend the Victorinox SwissTool but I don't know how its drivers compare to those on the Core.
The drivers on the two tools are similar in length
The small driver approx 2.5mm blade is the same length on each.
The large driver 8mm blade (Crate opener on the Swisstool) is approx 4mm longer on the Core.
The medium driver 6mm on Core/5mm on Swisstool is approx 8mm longer on the Swisstool, however this blade is also the bottle opener/wire stripper and widens dramatically from the tip, restricting access to some screw heads (in my experience).
There is also a further driver on the Swisstool approx 3mm but this is the typical driver on a can opener from SAK's, again its fine if you have clear and unobstructed access to the screw head.I personally don't get on too well with the Swisstool, although its very well constructed and feels like it could stop a tank, as I prefer the reach of "straight" driver blades and the blunt nose profile of the pliers means that I am unable to use it as my EDC, I need the needlenose pliers for opening electrical enclosures.
I have EDC'ed the Core for approx 4 months and have no complaints other than twisting the end of the small driver, my fault, although please be aware that to access the tools on the Core you need to open the handles whereas the Swisstool has all of its blades accessible from the outside, but you will need strong fingernails as the springs are very strong.
Hope this helps?
Best advise is to handle & compare if possible.
Rob
-
If you need an out and out beefy tool, my suggestion is the Wenger SwissGrip.
I don't think there's a stronger multitool on the market, but since you said that the Surge and SwissTool were out of your price range then I am guessing this one is too.
Although, I would also suggest that you contact Tim at FVEAP (www.felinevet.sosakonline.com) for a price on anything before you buy as Tim's prices and customer service are unparalleled in the industry. I think there is a very good chance of finding out that you can indeed afford one of the bigger tools if you aren't paying retail prices.
That having been said, if you liked the Wave but it wasn't strong enough then I'd suggest the Surge simply because it is very similar to what you are used to. The SwissTool however has more tools and more options, is just as strong but is smaller and lighter than the Surge. There's lots of information on the main site (www.multitool.org) on both tools (and more) so you can see what you are missing, what you like and so on.
Def
-
@preddan said:
... I am also looking for a prybar to carry with me at all times to avoid bending the screwdrivers. Any advice would be appreciated.You can buy a small Estwing or Stanley prybar. I have a couple of different sizes. I cut one end off a small prybar, drilled a hole, and rounded it off for easy pocket carry. Here is a before and after scan.

-
Plus you can keep watching for the new SwissBianco prybars that are posted in the +Bianco forum here too...
Def
-
There is some company or maker and I cant remember which one that makes keychain size pry bars/tools. You might want to search for one of those. I believe I seen one at TAD gear.
-
Thanks for all the great advice. I have e-mailed SOSAK about the swiss grip( do the knife blades lock as well?) and plan on moding a small prybar. Right now I am leaning toward the Core but will be sure to handle the SOG powerlock first. I am also now carrying a pocket mod- they are awesome. Thanks for helping me complete my edc.
Now if I could just get help convincing my wife :(
-
You have e-mailed SOSAK? What address did you use? I am SOSAK....
Gosh that sounds pretentious!
As for the wife thing, I think that's why almost all multis are grey. Once you get a few of them, your wife won't notice any new ones!
Def
-
(sigh.) If it was only that easy...........
-
Bob, your house tilts to one side because of all the multis lying around...of course it ain't easy O0
-
@CacherX4 said:
Bob, your house tilts to one side because of all the multis lying around...of course it ain't easy O0Holy cow Jim, you're right! I never noticed before how the old homestead is starting to lean a bit to the left.........well, there's only one cure for that:
Cheers, I'm off to town to pick up some more multitools and gear for the other side of the house, in order to balance things out! Talk to ya' later........ ;)
-
I'll bet Bob's truck springs have seen better days too!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



