What Did You Use Your Multitool For Today?
-
This was a few days ago, but I just got around to uploading pics. The base jaws in my Lathe finally gave up the ghost after a few years of running really heavy stuff. Luckily I caught it as I was loading a 700 lb part and we ordered a new set.
I took the chuck off(takes a crane to do it) and used my ST300 to remove the lock screws from the lock pins that hold the jaw screws in place.

I then had to use a makeshift puller to get the pins out.

We bought new jaw screws and base jaws, and after I finished rebuilding the chuck my buddy and I put it back in the machine. I had to climb in to align it while he put the bolts in. (the machine was Locked out and E-stopped, so it couldn't be accidentally turned on!) There really was no other way to do it.

-
Nice pics Mercury
Nothing that exciting for me today. Just used the orange peeler on my Executive to open a bag of diapers. -
Used the SOG PPP's awl when hanging shelves today. It's the only tool I have with a decent one and that's basically all I use it for, aside from when the compound leverage pliers come in handy.
Also turned some screws with the EDC Gerber Balance, but I do that just about every day. (Which is why the Balance is my EDC.) I also used its flathead yesterday to pry the hood ornament off of a BMW...
...Ok, it was my BMW, and I was painting the hood with flat black Plasti-Dip as seen below. (Covering up horribly oxidized faded cheap red paint until I can do a real paint job.)
<a href="http://www.flickr.com/photos/maximstensel/8861081274/" target="_blank" rel="noopener noreferrer"><img src="http://farm3.staticflickr.com/2829/8861081274_1bcb1aa10e_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
E30 hood Plastidip by maximstensel, on Flickr -
@Max Archer said:
Used the SOG PPP's awl when hanging shelves today. **It's the only tool I have with a decent one **and that's basically all I use it for, aside from when the compound leverage pliers come in handy.
Ever tried the 93mm Vic awl?
+1
The 93mm Alox model awls are the best I've used
-
I work for a company that makes various oilfield plumbing connections basically. We make a ton of proprietary subs and flanges, and some real neat prototype down hole tools.
Most of the time I am making parts that vary from 18 inches to 5 feet long, with a few 30 foot risers thrown in every now and then. My lathe has a 6.7 inch throat hollow spindle with a back chuck so I hang them out the back resting on a hydraulic roller jack. It's a trip to watch that thing spin at 500 RPMs when I cut the seal surface on the lead in. Tomorrow I will be cutting two 19 inch flanges, lots of roughing and a pretty cool program on those.
Back on topic, I was moving the bar stock that I will cut the flanges from back from the vendor today with our flatbed, we don't have a saw that can cut a 19 inch diameter so we had a vendor do it. They neglected to deburr the blanks when they were done so I used the file on my ST200 to remove the burrs so they wouldn't cut my tie downs.
-
An unusual, but good use earlier tonight: I was in the middle of cooking supper when I spotted a bug of some sort on top of the stove. The oven was on and the stove surface was hot I'm sure. The bug was stuck on it's back it seemed as anytime it got on its feet, it couldn't stay as its feet were probably hot. Me, being the sympathetic type, had a quick thought to use the PSTII's pliers to grab the bug and liberate him from the hot stove surface...right into a cooling stream of water washing him down the drain :D Mwahahahaaaa >:D
-
@Monrogue said:
An unusual, but good use earlier tonight: I was in the middle of cooking supper when I spotted a bug of some sort on top of the stove. The oven was on and the stove surface was hot I'm sure. The bug was stuck on it's back it seemed as anytime it got on its feet, it couldn't stay as its feet were probably hot. Me, being the sympathetic type, had a quick thought to use the PSTII's pliers to grab the bug and liberate him from the hot stove surface...right into a cooling stream of water washing him down the drain :D Mwahahahaaaa >:DThat may be the cruelest thing I've heard all day!
-
An unusual, but good use earlier tonight: I was in the middle of cooking supper when I spotted a bug of some sort on top of the stove. The oven was on and the stove surface was hot I'm sure. The bug was stuck on it's back it seemed as anytime it got on its feet, it couldn't stay as its feet were probably hot. Me, being the sympathetic type, had a quick thought to use the PSTII's pliers to grab the bug and liberate him from the hot stove surface...right into a cooling stream of water washing him down the drain :D Mwahahahaaaa >:D
That may be the cruelest thing I've heard all day!
Heeheeheeeee.... >:D
-
a calm but hot day here in izmir, turkey.i opened many bottles of soda for me and my buddies with st200.
-
At work we have these lengths of landscape timber that we use to set pipe and bar stock on so that we can fit lifting slings under them to move them around the shop. These lengths also sit on our part carts(worn out lumber carts bought from home depot). I was resting some very heavy parts on one of these the other day, and had it close to my lathe. I failed to notice the end was jagged as the timber had been snapped off at one point or another. It gouged a neat scratch into my lower leg. I whipped out my ST200 and used the saw to remove the offending pointy parts and sawed the wood flush so it is safe to walk around.
-
Yesterday I used my Micra's phillips to tighten a loose handle on a pot, and the Spirit's phillips to re-attach the magnet on a cupboard door.
-
I used my Explorer to slice up an apple for a picnic this afternoon with the wife and kids.
-
used my wave to make adjustments on mini blinds for a client. the needle nose pliers come in real handy when the cord lock is stuck. I used the flat blade screwdriver as a pry implement on the valance to loosen it.
-
Yesterday I used my Micra's phillips to tighten a loose handle on a pot, and the Spirit's phillips to re-attach the magnet on a cupboard door.
No bug action tonight?¿?

Unfortunately not. I also have an electric fly swatter, which is great fun. Wife doesn't like it though as it makes a loud snapping/popping sound when it makes contact. I think it's fun 
-
Yesterday I used my Micra's phillips to tighten a loose handle on a pot, and the Spirit's phillips to re-attach the magnet on a cupboard door.
No bug action tonight?¿?

Unfortunately not. I also have an electric fly swatter, which is great fun. Wife doesn't like it though as it makes a loud snapping/popping sound when it makes contact. I think it's fun 
Have you seen the one that you shoot at flys? It's like a rubber band gun with a fly swatter on it.
Sent from Endor via Schlapatok
-
Yesterday I used my Micra's phillips to tighten a loose handle on a pot, and the Spirit's phillips to re-attach the magnet on a cupboard door.
No bug action tonight?¿?

Unfortunately not. I also have an electric fly swatter, which is great fun. Wife doesn't like it though as it makes a loud snapping/popping sound when it makes contact. I think it's fun 
Have you seen the one that you shoot at flys? It's like a rubber band gun with a fly swatter on it.
Sent from Endor via Schlapatok
Ooooh, no I haven't, but that sounds like a good bit of fun as well

-
[quote author=Monrogue link=topic=12238.msg736927#msg736927 date=1370708537]
Yesterday I used my Micra's phillips to tighten a loose handle on a pot, and the Spirit's phillips to re-attach the magnet on a cupboard door.No bug action tonight?¿?

Unfortunately not. I also have an electric fly swatter, which is great fun. Wife doesn't like it though as it makes a loud snapping/popping sound when it makes contact. I think it's fun 
Have you seen the one that you shoot at flys? It's like a rubber band gun with a fly swatter on it.
Sent from Endor via Schlapatok
Ooooh, no I haven't, but that sounds like a good bit of fun as well

[/quote]I found it at Bass Pro Shop for $5. I didn't get it and I'm regretting it now

Sent from Endor via Schlapatok
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login