What did you use your Sak on today?
-
I used my swisschamp scissors to cut peas, strawberries and beans from my garden.
Now I´m eating it with a beer -
Now I´m eating it with a beer
The Champ or the veggies?
The Champ, obviously, because it is beefier.
Last night I used the backside Phillips on my s18 to take all the screws out of a wireless optical mouse, and the file to pry it open and take out the smaler screws holding the insides...in. Then I removed the worn-down on/off slider switch. bored a small hole in it, then used the Phillips to thread a small screw into the button to give it a more 3-D profile. Finally, I put it all back together. Now the mouse's owner can reach the on/off button again.
I admit I needed my Wave to shorten the screw so it wouldn't clear the button and bore right into the circuit board on the other side.
-
Today a huge storm came and my patio drain was covering with leaves and all sorts of crap. Remembered that i had a big roll of window wire screen (i dont know how to say this properly) and used the metal saw on my ranger 90 to cut a smaller piece, it made short work of it and managed to cover the drain in time

I dont know if you can see it in the pic but it was a big thick roll of a couple of meters.
Now can anyone tell me why i stoped in an emergency to take a pic to upload it here afterwards

Because that's the MT.O way of doing things.

That it is. :D
-
Used my sak alox farmer, my wife noticed that maintenance has let tree branches and "things" overtake the swing set out back, so the farmers two way saw did a heck of a job! JR
-
Vic Hunter in dual purpose. Cleaning a rabbit and explaining to my kid cousin why it's not a good idea to continue gambling
-
lol thanks. It's a matter of just showing him the results of compulsive gambling on a rabbit that had to be cleaned anyway.
Hopefully some pics soon and not with my cousin running away -
Bit boring but pulled a splinter out of my sons finger at the local farm, glad I had my trusty Sportsman with me. The wife just rolled her eyes!
-
I used my small Tinker to open up a package containing the new Spyderco Paramilitary 2 with CTS-204P steel and green scales. :D
Unfortunately, I wont be able to keep them at this time! That sucks and my pic doesnt do them justice as they are like WOW, Perfect!

-
The troughs and planters I bought recently for my garden often didn't have drainage holes in them, so I've been drilling holes in the bottom as I go, usually with my Spirit X (excellent awl). Today I had to drill another, but didn't have the Spirit to hand so I reached in my pocket and pulled out my Swissbuck Sidekick (Wenger Traveller variant). I didn't bother trying to use the punch as they're no good for drilling, but the can opener worked a treat

-
Awl to make a bead hole bigger, scissors to remove a whole bunch of loose cotton (drives me mad!) and the small blade for some post liberating.
-
Large blade to open a new bag of food for our dog.
-
I've used my Executive today for a variety of quick cutting tasks like opening some mail, opening the plastic wrapper over a microwave pizza, etc.
-
So i needed to change my curtain strap roller (dont know how to say this properly). Bought a new one, grabed my ranger from the sheath, took the two phillips out using the bit screwdriver and ready to replace... except the new one has a shorter distance between screws

So i could just put one screw but thats not a good idea on the long run, my power drill is currently lost under a pile of a lot of things while im remodelling my patio, so i was ready to postpone the job when i remembered how nice the new awl was for drilling a piece of wood a while ago. But can it handle a wall?
lets give it a try at leastSo first try on puncturing the wall, success
Now lets try and rotate it and see what happens (the actual twisting motion required a firmer grip than what the photo shows)
After twisting till the whole awl entered the wall took it out and found out why it drills so easily, the hollow part on the side is great for accumulating material preventing jamming-tearing
Now thats a nice hole for the screw
Finished using just the ranger
Things got a bit messy in the process but it was worth it :D it wasnt the awls fault though..
May i finish this long post giving a big
for wenger for a great useful sak
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








