Latshaw PocketWrench
-
shipping is outrageous. I just paid 18 bucks!
-
my new 2 pocketwrenchtool!
-
Nice!
As I mentioned in another thread, my wife was "hiding" this blackout version of the Chrome Vanadium PWII in a long forgotten toolbox in the garage. :ahhh :ahhh :ahhh
[/URL]Now it rests in a climate controlled drawer next to my EDC stainless steel PWII
-
I've got a few questions about these if someone would be kind enough to answer, that would be great.
I've seen the ones marked "Latshaw" on ebay, looks like they're made in Taiwan. Can someone who has both comment on the differences in quality, usability, etc?
I've been considering getting a Pirhana, how do they compare with the Pocketwrench II?
What other bits (Leatherman, Gerber, Victorinox) fit in the Pocketwrench?
-
I really need to replace my pocketwrench 2.
I used my old one a bunch.
its a great cheap tool.
-
other pictures!
-
some others!
-
and again! the comparison beteween the pocket wrenchtool II and the pocket widgy pry bar!
-
@3rdpig said:
I've got a few questions about these if someone would be kind enough to answer, that would be great.I've seen the ones marked "Latshaw" on ebay, looks like they're made in Taiwan. Can someone who has both comment on the differences in quality, usability, etc?
I've been considering getting a Pirhana, how do they compare with the Pocketwrench II?
What other bits (Leatherman, Gerber, Victorinox) fit in the Pocketwrench?
The Piranha is more versatile tool. I use the "jaws for pulling massive staples (like electricians use). The wrenches are of a different design so that they fit the flats of SAE (open wrench) and metric (closed wrench). The Piranha also has a bottle opener.
The PWII uses sharp "teeth" to bite into the nut, giving the wrench purchase. The PWII is great for rusted or damaged nuts, but if you have a chrome plated finish nut, the PWII will damage it.
Both do their jobs well, but Piranha does more jobs (and is also more expensive).
-
Love the black one... glad it got unhidden :D
-
Her's my setup , Spirit X , Leatherman bit driver ( mounts on the Spirit's phillips ) , and plain old 1/4" hex bits . I usually wear the pouch horizontal , with the bit wallet dropped into an adjascent pocket .
Chris


-
Both the sheath and bit wallet are home made . The sheath can be either vert. or horiz. The pouch part is ruff out , stands up to inevitable jobsite scratches better .
Chris
-
Nicely done, sir!

-
@3rdpig said:
I've got a few questions about these if someone would be kind enough to answer, that would be great.I've seen the ones marked "Latshaw" on ebay, looks like they're made in Taiwan. Can someone who has both comment on the differences in quality, usability, etc?
I've been considering getting a Pirhana, how do they compare with the Pocketwrench II?
What other bits (Leatherman, Gerber, Victorinox) fit in the Pocketwrench?
The Latshaw PW II were made in the USA and Taiwan. The USA made ones were made with chrome Vanadium and stainless and marked as to the steel used. The Taiwan model is not marked with the steel used and is not as good of quality workmanship as the others. Although it is highy polished and therefore very shiny. :D
-
I just got mine a couple days ago, I really should take some pics of it living happily with the rest of me EDC.
-
I've got a few questions about these if someone would be kind enough to answer, that would be great.
I've seen the ones marked "Latshaw" on ebay, looks like they're made in Taiwan. Can someone who has both comment on the differences in quality, usability, etc?
I've been considering getting a Pirhana, how do they compare with the Pocketwrench II?
What other bits (Leatherman, Gerber, Victorinox) fit in the Pocketwrench?
The Latshaw PW II were made in the USA and Taiwan. The USA made ones were made with chrome Vanadium and stainless and marked as to the steel used. The Taiwan model is not marked with the steel used and is not as good of quality workmanship as the others. Although it is highy polished and therefore very shiny. :D
I agree. :D Very shiny but when I got my Taiwan made model I first thought it was a knockoff. Had to check here first. ;) Here it is next to the US stainless version. (yea, I know, I need to clean it up a bit.
)

-
Does the Taiwan version even work nearly as well? The teeth on it look a lot smaller and straight up round compared to the shark's tooth daggers the USA version has.
-
@thebullfrog said:
Does the Taiwan version even work nearly as well? The teeth on it look a lot smaller and straight up round compared to the shark's tooth daggers the USA version has.

Yes, the US one has more aggressive directional teeth. The ones on the TW version are more rounded due to the coating. They both work good on larger nuts (16mm is the largest I believe) but the TW version does tend to slip more on the smaller ones.
-
@WhichDawg said:
yeah I was thinking it would be a nice add-on to a MT or blade. Either piggy back/dedicated sheath connected
to a larger sheath or if it can fit inside and share a sheath. problem is it's metal and could rub/scratch the other tool.
I'll have to investigate now! ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login