Gerber Versus Leatherman?
-
The sideclip is one of my all time favorite tools. I have nearly worn mine out.
Sent from my Galaxy S3 using crapatalk two point oh.
-
Another Gerber fan here. My regular carry tools at work are either an MP450 or an MP600 pro scout. Both have seen a ton of use, and I've never had an issue with them. As far as Octane vs. Skeletool, I traded the Skele within a week. The Octane is still here and sees plenty of pocket time. The only tool that's challenged it is another Gerber, the Balance, which I much prefer to the Juice. My most carried Leatherman is the PSTII, and though I have others (original ST, ST200, Wave), they just don't work for me as well as my Gerbers do. Not to say that they're bad tools in any way, just my preference.
-
Good question, the octane and skele are the most likely comparison I can think of. The liner on my octane is flimsy and flexes too much for me to use with confidence so I prefer the skele but I hardly use either anymore. I prefer the wave or rebar, or surge or even the wingman. I am fond of the gerber 600, diesel, and 800 models and have no objection to carrying them.
I have broken a few tools by pushing too far but the only name brand tool i broke too easily was the gerber radius, cutting a plastic band similar to a zip tie. No real stress involved.
-
I have many Gerber MP600 as they are US made, inexpensive, but a quality MT. The Gerber MP600's are also Army issue and come with many USGI color nylon Sheaths (cool factor).

I also like my Leatherman Super Tool 300 with CM154 blades as my "heavy weight" MT.

-
Fun thread. I also have comparable tools to fill similar niches from both brands. I have a PS4 and a Dime and I prefer the Dime ever so slightly. I think the LM is better made, I just prefer the package opener over a dedicated file, I like the bottle opener better on the Dime, I like the blade better on the Dime. Nothing against the PS4, it is solid, but the Dime gets it closer to the mark - for me.
I have a Skeletool and an Octane for pocket carry. I prefer the Octane. The Skeletool feels more solid, but it is bigger than it needs to be for such a minimalist tool. If it were an ounce lighter and a half inch shorter - winner. As it is, the Octane has better pliers, easier deployement, and a package opener.
I have a Wave and MP400. The Wave is the best overall multitool out there in my opinion. No contest really, as they aren't really in the same class.
Having said all that - I carry the LM Wingman almost daily, at home and at work. I love this thing. It fills the role of fullsize MT while still being comfy for pocket carry. Plus, it's cheaper than anything else from either manufacturer.
-
I might have to give my Dime some carry time again, it's been ages since I last used it.
-
I'm rather biased since my first Leatherman was the original PST, which I loved, and my first Gerber was the original Mr Pinchy that tore my hands up so bad that I wound up giving it to this guy at work I didn't like. I'd laugh out loud every time he'd scream in pain when the evil Mr Pinchy bit him again. >:D
Splice vs Squirt S4. The Squirt has good scissors with decent tools and blades for a keychain tool. There's nothing that great about the Squirt, but nothing bad about it either. The Splice on the other hand sucks out loud. Every single edge on the Splice is sharp...the edges of the tool might be sharper than the edge on the poorly designed main blade. It's impossible to use this little POS without first smoothing all the outside edges with a file or having leather gloves on. Also, every blade on it is hard to get out. Thank God it's got a fingernail file, because you're going to need it. It also gives the original multiplier a run for it's money in the pinching department. It's also too big and fat for a keychain tool and no tweezers either. Squirt wins, and wins by a huge margin in every conceivable way. A rusted, bent, 20 year old Revlon nail clipper beats the Splice in usability.
Skeletool vs. Octane. Not a contest for me, the Octane has the worst full size phillips driver on any tool I've ever used, the main blade is poorly designed, the tool opens in your pocket and it just feels cheap. The package cutter is nice, but how often do you use that in comparison to a phillips driver? The Skeletool, despite not being my favorite tool at least has good build quality, usable drivers and a half decent blade. I sent the Octane back to Gerber with some rather impolite suggestions of what they could do with it. Unfortunately they sent it back, along with a new one which is still in the box. Winner, Skeletool even though I don't carry it much except for lazy weekends. Kudos to Gerbers CS department, but I fart in the general direction of whoever tested and approved of the phillips driver on the Octane.
Flik and MP600 vs. Charge TTi and Rebar. I didn't care for the Flik, it had good pliers, decent blades and the good scissors, but the small tools are horrible, I gave it away. The MP600 is well made, the tools are nice and if it wasn't for the Rebar or Vic Spirit it would probably be my EDC tool, as it is it's in the rotation. Mine is a USA model, Black Oxide and has the ACU sheath. It's hard to find fault with the MP600, a good solid tool that you won't regret buying. The pliers with the crimper near the end on the Charge ruins the entire tool for me, I use pliers a lot and the crimper there cripples them. I'll probably sell or trade it someday, but other than that it's got great blades and very usable tools. The small driver on a tool this size is nice. I've only had the Rebar for a couple of days, but so far it's the winner for me in this group, good tool selection, good quality and great pliers. Also, it's small, flat and it fits in the same sheath I made for my PST years ago that also holds a flashlight. Old school fun for me. Yes, there's some bias here as well as some nostalgia. The Rebar is absolutely in my EDC rotation.
MP800 and Freehand vs Supertool 200 and 300. The build/material quality on the Supertools is excellent while the Gerber tools is, at best, good enough. All of these tools have great pliers, but the sprung pliers on the 800 stand out from the crowd, I can't even describe how much easier pliers are to use when they're sprung. I've heard this make the plier head weaker, but I'm not shy about leaning on my tools and I've leaned on those pliers hard with no problems (I broke the tip off one side of the pliers on my Sog Powerlock the first day I had them). The Freehand has those abysmal tiny tools like the Flik, honestly they're the worst thing I've seen since the Hindenburg disaster. Gerber engineers should stop the drugs or whatever it is that made them think that those tools were anything other than a blight on the world. Otherwise the Freehand is great and I love the prybar, scissors and blades. The ST's really need heavy duty scissors IMO, but other than that it's hard to find fault with them, the're big, strong and well made. The MP800 is the best all around tool of this group IMO and it's becoming the tool I stuff in my pocket on those weekends where I have projects around the house. I wish I had a Surge to compare, but for some reason the Surge has never appealed to me. Eyeglasses screwdriver on a huge MT? But no HD scissors? Get out of town with that. And my Chinese made Powerlock has tools made of such soft materials I thought they must be faulty, but the replacements were just as bad. Not sure what to do with that thing except to give it as a gift to someone who won't use it.
Honorable mention to the Gerber Fit. There's not really a Leatherman to compare it to, and quality wise it falls short of it's closest competitors, the Vic Cybertool 34 and Cybertool Lite. But it's very usable and has a handy toolset with a great flashlight.
-
I wish I had a Surge to compare, but for some reason the Surge has never appealed to me. Eyeglasses screwdriver on a huge MT? But no HD scissors?
The Surge DOES have HD scissors.
-
Gerbers don't appeal to me at all. They look ugly compared to LMs and many of them unnecessarily fat. I find their design silly with form over factor mentality. And most reviews didn't change my mind (exactly the opposite). Bear Grylls products are obscene even related to other Gerbers.
I don't say they aren't good. They just don't appeal to me.
SOGs look serious on the other hand. But still I prefer Leathermans. Until Victorinox will make a dual OHO blade with integrated bit kit Swisstool. -
I love the solid block of steel feel that Leatherman tools have, but it's gonna take a lot to get my Balance out of my pocket. Screwdrivers are by far the tool I use the most, and I've never seen a plier-based MT that could come anywhere close without extra accessories.
-
Mind if I ask which Gerber pliers you managed to break?
Sorry I forgot all about replying to you so better late then never.
I have had a Suspension model break twice both time using the plier to hold onto something.
The break was in the exact same spot near the rivet hole.The other one was one of the old Gerber Blunt Nose plier.
The teeth on the plier were gone after the first use then the plier snapped in half also near the rivet hole.
Poor heat treating was to blame both times and Gerber verified the issue with a supplier. -
I wish I had a Surge to compare, but for some reason the Surge has never appealed to me. Eyeglasses screwdriver on a huge MT? But no HD scissors?
The Surge DOES have HD scissors.
You're right, I was thinking of something else. Does that mean I have to buy a Surge?
-
I wish I had a Surge to compare, but for some reason the Surge has never appealed to me. Eyeglasses screwdriver on a huge MT? But no HD scissors?
The Surge DOES have HD scissors.
You're right, I was thinking of something else. **Does that mean I have to buy a Surge? **
Yep! It's the rule around here - once you mention a tool in a thread, you are obligated to pick one up. ;)
-
I wish I had a Surge to compare, but for some reason the Surge has never appealed to me. Eyeglasses screwdriver on a huge MT? But no HD scissors?
The Surge DOES have HD scissors.
You're right, I was thinking of something else. **Does that mean I have to buy a Surge? **
Yep! It's the rule around here - once you mention a tool in a thread, you are obligated to pick one up. ;)
I can second that motion.
Now im gonna bash on Leatherman a bit. Why oh why dosent LM have a bluntnose plier head as an option? The ST300 plier at the base is just over a quater inch and is tapered down to about 1/16 at the tip. That mp600 bluntnose i just bought HAS a quarter inch the whole length of the plier and is an option on Gerber tools. Sure LM has plier options with CC and the EOD pliers, but no fat blunt nose. I bought the MP(with the help of Gareth) for a duty specific application and it fits the bill. Ive used the ST300 countless times at work for a ton of applications and can do what I apply to it. It always fell short at making wire joints. Due to the needle nose.LM lost me there.
I sort of hit the wall with LM tools at the moment. For the most part I have the LM tools i sought after and am extremly happy with them. That new gerber sort of opened up my view on MT's alot on what to expect out of your multi. Having an array of options on MT's makes and breaks buyers. I wish i bought that mp sooner and saved a few private bank notes.
-
Strata vs Wingman
I don't know if you ever noticed but this two mts are very similar in size and tool selection. Both have sprung pliers which i find very comfortable, the Strata has the bonus of replaceable cutters and they actually cut stuff unlike Wingman's. Both sport combo edge blades accesible from outside and more or less one hand opening. I find the Wingman's one more pleasant to the eye if that matters. They both have a sort of package/clamshell opener and they both work but the LMs is definitely better. They both have this short file, maybe the Starta is a bit better. In my opinion the scissors ont the Gerber are better even if shorter, on my Wingman the scissors tend to jam in certain circumstances. I also prefer the cap-lifter on the Strata, the one on the LM tends to pinch caps (i don't know how it works as a can opener). Comparing these two mts we have a rare case where the Gerber has a 3d phillips and the LM a flat one! The Strata sports a saw too, not to be found on the LM which on its side has a very nice pocket clip. The locking/unlocking tabs on the Strata are freaking stiff and quite a pain to use! Even if i like the Strata and i think it's a decent multi i would go for the Wingman if you consider the price!
-
I think the Strata is a great and underrated tool. I got mine brand new for less than $20, and it was a great steal IMO. The locks aren't too stiff to me, the pliers are great, and it just might be the best Phillips driver Gerber's ever made. No contest between it and the Wingman. In fact, I don't even own a Wingman anymore, but the Strata remains in the rotation.

-
@jerseydevil said:
I think the Strata is a great and underrated tool. I got mine brand new for less than $20, and it was a great steal IMO. The locks aren't too stiff to me, the pliers are great, and it just might be the best Phillips driver Gerber's ever made. No contest between it and the Wingman. In fact, I don't even own a Wingman anymore, but the Strata remains in the rotation.
At that price yes, i would probably go for the Strata! Usually i see the Strata at about 50dollars or more!
-
I think the Strata is a great and underrated tool. I got mine brand new for less than $20, and it was a great steal IMO. The locks aren't too stiff to me, the pliers are great, and it just might be the best Phillips driver Gerber's ever made. No contest between it and the Wingman. In fact, I don't even own a Wingman anymore, but the Strata remains in the rotation.

At that price yes, i would probably go for the Strata! Usually i see the Strata at about 50dollars or more!
This one was the display model at a local sporting goods store, and the last one they had. It still had oil on it! I've used the heck out of that tool, and it's still going strong. I think tomorrow it'll take a trip to work with me.....
-
multitools-leatherman, sog (i like paratool)
folding knives-gerber (esp. bear grylls series), opinel
small sak-victorinox (manager etc. 58mm series)
fixed blade-cold steel, aitor (cold steel chinese war sword, search in youtube)coz of my second job, medical rescue; i tried many on the field.this is my humble opinion.
-
@SolomonKane79 said:
Strata vs Wingman
I don't know if you ever noticed but this two mts are very similar in size and tool selection. Both have sprung pliers which i find very comfortable, the Strata has the bonus of replaceable cutters and they actually cut stuff unlike Wingman's. Both sport combo edge blades accesible from outside and more or less one hand opening. I find the Wingman's one more pleasant to the eye if that matters. They both have a sort of package/clamshell opener and they both work but the LMs is definitely better. They both have this short file, maybe the Starta is a bit better. In my opinion the scissors ont the Gerber are better even if shorter, on my Wingman the scissors tend to jam in certain circumstances. I also prefer the cap-lifter on the Strata, the one on the LM tends to pinch caps (i don't know how it works as a can opener). Comparing these two mts we have a rare case where the Gerber has a 3d phillips and the LM a flat one! The Strata sports a saw too, not to be found on the LM which on its side has a very nice pocket clip. The locking/unlocking tabs on the Strata are freaking stiff and quite a pain to use! Even if i like the Strata and i think it's a decent multi i would go for the Wingman if you consider the price!
well, that strata has been on my sights for quite a bit of time but the gerber det was way up on my list. i was planning on getting wingman but i'll put that off and get that strata instead :-D
Sent from my Cruize W280 using Tapatalk 4 Beta
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login