30 Day Coghlan's Campers Tool Challenge!
-
@trey said:
It took me a minute to figure out what you didn't like about the scale. No changeover here. We had a couple of metric scares but it never took.Metric and I are buddies. But far more important to me is that I'm four days in, and one of the most vital tools on Campy has already biffed it.
-
Another great hardcore cheap tool challenge!


-
That sort of knife is good as a scraper. There's no particular edge to dull by abusing it and you're unlikely to chip it either.
-
Keep up the good with mate, we appreciate your hard work.

-
Serious thanks for another torture test on a very cheap tool. This tool is (as far as I can tell) identical to the High Uinta MT I reviewed here...
</topic/39450I said it in that review, and I'd reiterate it... I'd prefer this to the cheap chinese SAK knock-off tool to throw in a emergency kit (for instance). Not super happy with EITHER for long term, though.
-
Lynn's back.

We've missed you, Lynn.

-
Thanks to an automatically set mouse button action, I have to rewrite this entire post. Argh.
@Lynn LeFey said:
Serious thanks for another torture test on a very cheap tool. This tool is (as far as I can tell) identical to the High Uinta MT I reviewed here...
</topic/39450I said it in that review, and I'd reiterate it... I'd prefer this to the cheap chinese SAK knock-off tool to throw in a emergency kit (for instance). Not super happy with EITHER for long term, though.
I agreed with this sentiment at first, but the longer I go the less sure I am.
Day 5, only two days after I had to re-sharpen the knife (The Rigid Insulation Fiasco of '13), and having only used the knife on cheese, grapefruits, and one (1) orange, this is my result attempting to cut a grapefruit:

It's like watching a train wreck! A citrus-flavoured train wreck!This is officially the last test of the blade I will be making. I don't want its abject failure to dominate the next 25 days of reports.
Day 6 started out as part of a fun weekend of bicycling in a nearby large city with a friend of mine. It ended that way, too, but we had an interruption when a bolt came loose in the SPD cleat of his right bike shoe. Since the cleat wouldn't twist with the rest of his foot, he couldn't get it out of the pedal.
[list type=decimal]
Things Campy could, could not, and need not do:-
Could: marlinspike the ridiculous double-knot on the shoe. (Phillips screwdriver)
-
Need not: remove the pedal (neither of us would ever go cross-city cycling without a bike-specific multitool).
-
Could not: unscrew the spindle for the rear SPD cleat latch thingy (without a lock, it's bloody knuckle time!) (Phillips screwdriver)
-
Could: pull out the loosened spindle. It was super tight (go spring tension!) (pliers)
After that, it was gravy. So the pliers are still winning, but the lack of any slip-joint, friction, or...well...any lock makes the screwdriver a menace.
Day 7, we re-assembled the pedal. Campy's pliers helped get the pieces back in, but the screwdriver was incapable of turning the spindle back in. Here is a re-enactment of the nice pinch I got, since neither of us had a camera ready at the time:
...and here's what it felt like:
So, the screwdriver is great, provided you want to use it as a marlinspike and not for the screwing or unscrewing of screws. Win? Maybe not.
So, as of Day 7, the only thing that's really impressing me so far is the plier part of the tool. I may as well have spent the same amount of money on a pair of actual, regular-for-real type pliers. But with 23 days to go, onward must we trundle!
-
-
One must suffer for his art...and thus...you are very brave. :D
-
Jothra, do you think the SAK knockoff would have succeeded at any of the tasks the Camper's Tool failed?
It seems the blade on the SAK knockoff is better. What about the drivers?
Also... yeah, I've considered that instead of a super-cheap plier based multitool, a better inexpensive option might be a SAK or SAK-alike and a $2 pair of locking pliers.
-
@Lynn LeFey said:
Jothra, do you think the SAK knockoff would have succeeded at any of the tasks the Camper's Tool failed?It seems the blade on the SAK knockoff is better. What about the drivers?
Also... yeah, I've considered that instead of a super-cheap plier based multitool, a better inexpensive option might be a SAK or SAK-alike and a $2 pair of locking pliers.
The backside Phillips on the Coghlan Army Knife is far superior, mostly by virtue of having a proper slip-joint lock. Actually, that and the bottle opener driver are my two favourite components on Coghlan. They never once let me down, even during serious construction and demo.
-
I just used my 'High Uinta' version of this tool for the can opener. It works quite well.
I suppose I need to test the blade on mine. I don't wanna...

-
Day 8 shall hitherto be known as The Day the Can Opener Worked!
It opens cans by punching, just like Jackie Chan. The lack of a lock makes no difference, since can openers only work in one direction.
I had Shrek Soup.
-
Despite possible appearances, the challenge has not been abandoned. Rather, things have been pretty easy on young Campy, but that will change in two days. After the Monday stat, Campy gets a rude introduction to commercial construction in what may become known as the day the challenge really started.
In the meantime, I've still been using the blade for easier food prep (another couple of sharpenings, and still a little wary of the non-locking tools), and the pliers have actually stayed in my good books by continuing to...well...ply. The wire cutters have also not failed yet, though I've mostly only been using them on things like zip ties so far (as well as the Day 1 coat hanger job).
So far, I'm willing to call the pliers a possible victory, but we'll see what real abuse* brings!
*By real abuse, I mean something like tying rebar. I actually have pretty high hopes for this part of the challenge.
-
Your wave just died... will campy be next?

-
Not today!
Day 21 saw some real action! Campy spent most of the day cutting tie wire (the real stuff; not the stuff from the gardening section of your Home Hardware), without any damage to the wire cutters. The lack of a hard-wire cutter, which I had originally thought would be a drawback, was actually really useful here—the hard-wire cutter is usually too big to outright slice through tie wire, so having regular cutters all the way down (just like proper rodbuster pliers) was great. Granted, there are other situations in which I will want hard-wire cutters, but this time it's a win for Campy!
On what I already knew was an outside chance, I tried to ream a hole in an Emergency Contacts sign with the awl, but I don't think I can blame Campy for that not working. Those signs have an aluminum layer in them, and that's really a job for a drill (since I had one handy). Just for fun, though, I tried with my new Leatherman Rebar:
Again, though, that's even more above-and-beyond than I would normally go. Even I wouldn't normally use a pocket tool for that one. Also, while it couldn't make the hole, Campy did, in fact, make the hole larger. I should have taken a picture of that, but I'm a bad person.
Today I also replaced the strap of my Superman watch (my teaching/dress one being my Clark Kent watch), and—the new strap being metal instead of fabric—I needed pliers and a paperclip to remove links to make it fit my dainty wrist:

A little farther...a little farther...a lit...NO, BACK! BACK! Well, that works too...Here is Campy celebrating with my watch! By actual regular-for-real coincidence, they match! Wow!

I said I have dainty wrists...not dainty hands.The takeaway from Day 21 is that Campy's pliers and wire cutters are still winners, and that I should really invest in an actual camera.
-
Waiting for the next episode of this seriously entertaining 30 day Challenge.

-
Day 22-23!
Still no rebar tying (more's the pity), but a lot more tie wire cutting. I'm still really pleased with the wire cutters. I had a grudge match between the awl and some metal signs, but had no better luck. It is worth noting that while the awl/reamers on my Leatherman Rebar, Victorinox Outrider, and even my Wenger Evo s18 managed to punch the holes, it was spectacularly difficult with all of them.I'm working a rare late night this evening. We'll see what comes for Campy!
-
Day 24-25
Two days of moderate work!Day 24 ended up being a day of dry-packing columns. This means taking bagged grout (MBED, 212, or—this is the new one I'm trying—755), mixing in just enough water to make it pack together when I pound the crap out of it with a piece of wood, and then using this mix (and this piece of wood) to fill the space between a steel column and the concrete foundation to which it is bolted.
What does this have to do with Campy the Campers Tool? I needed to manufacture two things for this job: a packing stick, and a water cup.
The packing stick was a piece cut from a survey stake. Campy doesn't have a saw, so naturally it wasn't expected to do that part. But later, when I needed a thinner pounding stick for one particularly low-sitting column, I did use Campy's knife to cut the splintery pieces from a 4" long, 2" wide piece of scrap 1/4" plywood. I was tremulous about the lack of a lock (like usual), but it worked just fine. I'm sure it needs sharpening again already, but at least it succeeded!
The water cup was (obviously, I suppose) for scooping water from my big water bucket into my smaller grout bucket. I usually mix in small batches so I don't have half a bucket of grout left drying if I get called off to another task (or, worse yet, lunch!), so I don't like dumping, barely controlled, straight from the water bucket. So what do I have on site to use for this cup?
It's a new site, so...nothing! Wait, not nothing...pop cans! So I used the knife to cut the top from a can, and the pliers to fold the edge down so I wouldn't cut my careless self on the cup during use.
As I didn't have a camera on me at the time, I performed a re-enactment on my front lawn. Success? Twice? Well played, Campy!

This can has no idea what's coming, but the Jaws theme is probably playing in the background.
This is a bit like the ending of One Flew Over the Cuckoo's Nest.
Folding the edge down (safety third!)
Finished! Lovely? Well, no, but effective.I'll say one thing for the knife, which is that the blade dulls pretty fast, but only gets so bad before it seems to level out. While it's not good for edge retention, at least it won't get quite as dull as a ball of Silly Putty after a bunch of cutting.
Day 25 is, oddly, the first time I've tested the bottle opener. It works. Now I can enjoy something I don't see often where I live: a beer from Pacific Western Brewing! Honey Brown fun!
The "awl" (the one that looks like a rounded slot screwdriver) helped me marlinspike apart one of those Rocky S2V paracord Survival Grenades (I wanted the parts for my own mini kit). The awl is useful for something! Unfortunately, it was actually kind of a chore, because until I got the end of the awl worked into the knot, it kept trying to close on my fingers. This is like in that one M. Night Shyamalan movie in which we find out that the one character's superpower is Not Drinking Water—it might come in handy, but the circumstances sure aren't going to come up too often.
-
Great work still.
Maybe instead of using the knife blade you could use the can opener to open the can like a normal food can. I have turned soda cans into cups using the can opener on my wave before.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




