And so it begins.... (My adventures into Alox!)
-
They are a great colour... lovely stuff

-
I think that blue is one of my favorite colors that you've done so far Robert! Looks great!
-
He he. Nice one! Mine was first ;) From 2012:
-
Would that sweet blue one be yours JR? :D
-
His is red. :D
I got the cadet nail file and blade working in the main layer today. I needed a custom made spring and the catch was that since that spring is stronger than a cadet one, I had to take a bit off the nail file pivot to allow easier opening. Otherwise it's a super nail breaker.
-
Would that sweet blue one be yours JR? :D
His is red. :D
I got the cadet nail file and blade working in the main layer today. I needed a custom made spring and the catch was that since that spring is stronger than a cadet one, I had to take a bit off the nail file pivot to allow easier opening. Otherwise it's a super nail breaker.
Ah, cool. Your mod that has the openers and Phillips in one layer, can the awl replace the can opener? Then we could have the nail file and the awl together on the 93mm chassis.
-
Would that sweet blue one be yours JR? :D
His is red. :D
I got the cadet nail file and blade working in the main layer today. I needed a custom made spring and the catch was that since that spring is stronger than a cadet one, I had to take a bit off the nail file pivot to allow easier opening. Otherwise it's a super nail breaker.
Nope, RED! He he, but thanks for the update! So it breaks the nail and then you can file it :D works for me
lol JR -
More blue today. :D






-
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JR
-
@MadPlumbarian said:
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JRI got your brass liners cut today. :D Its currently in the rough assembly stage where I do the fitup on long brass pins, then belt grind the back to make all the springs and liners nice and flush. Then I take it all apart and hand finish each spring and liner, then polish. Then I do the final assembly.
-
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JR
I got your brass liners cut today. :D Its currently in the rough assembly stage where I do the fitup on long brass pins, then belt grind the back to make all the springs and liners nice and flush. Then I take it all apart and hand finish each spring and liner, then polish. Then I do the final assembly.
So in other words no sneak peaks :( JR
-
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JR
I got your brass liners cut today. :D Its currently in the rough assembly stage where I do the fitup on long brass pins, then belt grind the back to make all the springs and liners nice and flush. Then I take it all apart and hand finish each spring and liner, then polish. Then I do the final assembly.
So in other words no sneak peaks :( JR
Well nothing pretty to see yet, but I can snap some progress pics for you.

-
Nice job syph, I'm getting goose bumps waiting! No sneak peeks? :D JR
I got your brass liners cut today. :D Its currently in the rough assembly stage where I do the fitup on long brass pins, then belt grind the back to make all the springs and liners nice and flush. Then I take it all apart and hand finish each spring and liner, then polish. Then I do the final assembly.
So in other words no sneak peaks :( JR
Well nothing pretty to see yet, but I can snap some progress pics for you.

JR -
Your mod that has the openers and Phillips in one layer, can the awl replace the can opener? Then we could have the nail file and the awl together on the 93mm chassis.
-
@Corso said:
Your mod that has the openers and Phillips in one layer, can the awl replace the can opener? Then we could have the nail file and the awl together on the 93mm chassis.I dont think so, but it would be really close. I did put the awl where the can opener was before, but I had to bend the tip of the bottle opener to allow room, and I didnt love doing that. The phillips might allow for the awl, but its longer than the can opener is... if it fits it would be a tight squeeze.
-
This is all the springs for your mod and brass liners rough cut. I used to try to finish each part on its own, then I clued in to do a rough assemble and grind the whole back all at once so they are nice and flush, then finish them individually.
The long L pins make it easy to quickly disassembles, and I have a bucket of old msc broken parts that I use as temp fit up pieces just so the springs are just right. It works great.


-
Looks good Syph
Looks like JR's getting a beast of an Alox mod as well huh? -
I got goose bumps! JR -
@MadPlumbarian said:
I got goose bumps! JRI bet you do ;) Can't wait to see pics of the completed SAK :D I'm loving mine, and I'm happy you are finally getting yours soon :D
-
I am so jealous of all these syph007 mods! Only a few more weeks and I'll have the cash to place an order.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login