And so it begins.... (My adventures into Alox!)
-
@MadPlumbarian said:
No more goosebumps,
I keep having to rub my eyes and wipe the drool off my face,, JRI'm drooling too and it's not even mine!

-
Ok I got a question for everyone, what size sheath is needed for one of syph007's custom sak's? I have two of the thick brown(but looks red) basket weave ones but both are extra large, any clue if a medium or large will fit a farmer with scissors and syph's patten Philips/openers? Thanks, JR
-
Here, I will tease you with a pic of one part I just made. :D This is the old brass keyring spacer riveted with a 1/16 brass pin to the new liner I made. Sanded, polished and ready to rock. When I do brass or Ti liners and keyrings I rivet them together as it drives me nuts when they move after assembly.




-
NOW!!!! lol JR -

Can't wait to see it installed and working
-
Ok, Im all done Big Red. :D
First some closed shots from various angles.





And some open shots showing all the tools, and the first for me of putting on a cadet nail file.


And a close up of the nail file nail nick. It really did need a thicker spring to force it up higher, it wont work with a standard blade spring as nicely. Well you could bend up the spring to raise it higher, but then the springs wouldnt be flush on the back.


I tried to show the spacers here for the phillips but it's hard to see. I made them from brass as well and polished them. They look sweet in person, but hard to photograph.

Cheers!
-
Ok, Im all done Big Red. :D

Cheers!

Big Red huh, I was thinking something like the cadet farmer+ but Big Red fits too,
very nice job! Can't wait! Oh you never gave me a true width? Gotta find me a nice sheath for BR :D JRLOL you can rename her once the adoption papers are final. :D
Its about 20mm, or just a tiny bit wider than 3/4 inch.
-
Ok, Im all done Big Red. :D

Cheers!

Big Red huh, I was thinking something like the cadet farmer+ but Big Red fits too,
very nice job! Can't wait! Oh you never gave me a true width? Gotta find me a nice sheath for BR :D JRLOL you can rename her once the adoption papers are final. :D
Its about 20mm, or just a tiny bit wider than 3/4 inch.
Lol, ball buster! Pm was sent,, JR
-
Awesome.
I've always wanted an 84mm file in a 91mm knife... now I want it even more! :D
-
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))
Sent from my XT901 using Tapatalk 2
-
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))
Sent from my XT901 using Tapatalk 2
You got that right!
JRI hope it makes a speedy trip to your mailbox. Believe me, I understand the anticipation;)
Sent from my XT901 using Tapatalk 2
-
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))
Sent from my XT901 using Tapatalk 2
You got that right!
JRI hope it makes a speedy trip to your mailbox. Believe me, I understand the anticipation;)
Sent from my XT901 using Tapatalk 2
Not to fast, i still need something to complete they whole setup, so im waiting for answer in regards, but of course they don't answer it while on the weekend,, but if its what im after, there in the same state, and will probably be here before the knife.. JR
-
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))
Sent from my XT901 using Tapatalk 2
You got that right!
JRI hope it makes a speedy trip to your mailbox. Believe me, I understand the anticipation;)
Sent from my XT901 using Tapatalk 2
Not to fast, i still need something to complete they whole setup, so im waiting for answer in regards, but of course they don't answer it while on the weekend,, but if its what im after, there in the same state, and will probably be here before the knife.. JR
Oh what else are you getting? Or will you not say until you get it;)
Sent from my XT901 using Tapatalk 2
-
[quote author=Monrogue link=topic=34772.msg742010#msg742010 date=1372020399]
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))Sent from my XT901 using Tapatalk 2
You got that right!
JRI hope it makes a speedy trip to your mailbox. Believe me, I understand the anticipation;)
Sent from my XT901 using Tapatalk 2
Not to fast, i still need something to complete they whole setup, so im waiting for answer in regards, but of course they don't answer it while on the weekend,, but if its what im after, there in the same state, and will probably be here before the knife.. JR
Oh what else are you getting? Or will you not say until you get it;)
Sent from my XT901 using Tapatalk 2
[/quote]
It wouldn't be a surprise if i told you now would it! JR -
[quote author=MadPlumbarian link=topic=34772.msg742016#msg742016 date=1372021044]
[quote author=Monrogue link=topic=34772.msg742010#msg742010 date=1372020399]
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))Sent from my XT901 using Tapatalk 2
You got that right!
JRI hope it makes a speedy trip to your mailbox. Believe me, I understand the anticipation;)
Sent from my XT901 using Tapatalk 2
Not to fast, i still need something to complete they whole setup, so im waiting for answer in regards, but of course they don't answer it while on the weekend,, but if its what im after, there in the same state, and will probably be here before the knife.. JR
Oh what else are you getting? Or will you not say until you get it;)
Sent from my XT901 using Tapatalk 2
[/quote]
It wouldn't be a surprise if i told you now would it! JR
[/quote]I thought you would say that;). I'm excited for you though. Can't wait to see pics of your goodies!
Sent from my XT901 using Tapatalk 2
-
[quote author=Monrogue link=topic=34772.msg742017#msg742017 date=1372021180]
[quote author=MadPlumbarian link=topic=34772.msg742016#msg742016 date=1372021044]
[quote author=Monrogue link=topic=34772.msg742010#msg742010 date=1372020399]
Looks sweet Syph, and congrats JR! I bet you're chomping at the bit to get your hands on it:))Sent from my XT901 using Tapatalk 2
You got that right!
JRI hope it makes a speedy trip to your mailbox. Believe me, I understand the anticipation;)
Sent from my XT901 using Tapatalk 2
Not to fast, i still need something to complete they whole setup, so im waiting for answer in regards, but of course they don't answer it while on the weekend,, but if its what im after, there in the same state, and will probably be here before the knife.. JR
Oh what else are you getting? Or will you not say until you get it;)
Sent from my XT901 using Tapatalk 2
[/quote]
It wouldn't be a surprise if i told you now would it! JR
[/quote]I thought you would say that;). I'm excited for you though. Can't wait to see pics of your goodies!
Sent from my XT901 using Tapatalk 2
[/quote]
I know :P all in due time! Thanks.. JR -
Here's a new one configuration. Well basically it is my standard phillips/openers mod, but with a mag glass.




There is always more parts than it seems, for these mods. I still make custom washers for all the layers that need it.

To get the mag glass to sit nice and low, I removed a rounded recess in the springs, and also the nub from the mag glass. Without both of those tweaks I dont like how high it sits.


Cheers!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login