Zoidberg's Brain Surge.
-
@MultiMat said:
:ahhh :ahhh :ahhh. Would make for a interesting warranty claim :P :D :D."I was dressing my grinding wheel with my Surge when this happened" :o :P :D :DCool combi tool mate
, you could scare the bottle tops off by just presenting it too a bottle :D
It is like starting a fire by only staring at a log, it gets scared and ignites. It took me a while to understand what was going on but I sure like it! 
Great job mate, keep us updated!!
-
@MultiMat said:
:ahhh :ahhh :ahhh. Would make for a interesting warranty claim :P :D :D."I was dressing my grinding wheel with my Surge when this happened" :o :P :D :DCool combi tool mate
, you could scare the bottle tops off by just presenting it too a bottle :DLaughed to myself about the warranty thing when I was putting it back together. First I would have to damage one of the few unaltered original tools. Then what note does one send with it. The please don't fix a and b just fix c thanks, or send me a random something and keep this as a prototype/feedback.
Thanks everyone for your kind comments, they have helped make a rough week feel better.
-
Nice work, tell us how it holds up - and i would advise against using it on more than 2 beer bottles in a row...
And regarding the "Stop" thing, well.... I came here because i wanted to read about how to repair or maybe mod my OND MP 600. By now i own a Crucial, MP 800, 4 or 5 MP 600, have aMP 400 incoming. Not counting the SAKs, GAKs and gadgets that started to show up in my Mailbox. and it all started with one Spartan and my trusty MP 600.
How do you stop?
-
[/quote]
You don't ;). Lol
[/quote]I´m afraid you might be right...
-
Did you mill teh head down or how did you bluntnose the head?
I would bluntnose some tools but am afraid to destroy teh tempering by indusing too much heat. -
I put it in a vise and tried a test cut nearer the end with a grinder and a very thin cut off disc.
However it heated up too fast for the amount of time I had.
So I finished off the test cut with a hacksaw which worked well.
Using the hacksaw again I cut off another section.
Cleaned up the rough bits and edges with a smurf file, then a mill file.
Gave it a quick sanding and took some pics, all finished within an hour.
By taking your time and doing it by hand I doubt you'll create enough heat to cause any damage. -
So the hacksaw did cut through the plier head in satisfactory time? I was afraid I would be sawing and sawing until I grew grey and old...
I guess sometimes a hands on test will tell you more than research. ;-)
I´ll give it a go at one of my Wingman/sidekicks.Thanks for the feedback and congrats on a nice mod!
-
I was happy with the speed of the cut.
Let the saw do the work and take your time, keeps the work cool and cut tidy.
You'll be right. -
I really wish MT companies would make an optional blunt nose plier head for their tools.
Or, if they specifically designed a BN tool, doesn't that open up more room in the body of the tool for larger implements? That would be nice.
-
@zoidberg said:
So the Small Bit Driver went to the Core to wait for next time.Onto the Surge.
The pushed out side.
Awl survives for now.
The pushed in side.
Both sides of the story.
And fully closed. Round one done. Who wants to hear my outside Awl plan?
And... has there been a revamp of the Surge as of yet? ???
-
It served well for a couple years and then I picked up the newer version.
I think months later some of it was parted.
And the new version born.
More pics are over here.
-
-
Like the new pliers idea, being snubbed and all. What did you do to keep the black oxide from burning up?
Still have the old Surge. Don't know what I could possibly do to it to get ir replaced factory wide to a newer version. One Surge is enough, especially for the the weight! Wouldn't want to buy another one unless it was a Mini-Surge-like in a Charge model or something. Of course once taking the pliers down the warranty is out the roof anyhow.
-
My First Crunch was way better than the replacement I was sent. Stupid me tried to cut the final area of a stuck stainless steel link, and my heart fell when the Crunch head broke. It did go in a "soft crunch" ... and I'm here crying, NOOOOOOOOOOOOOO!
It's replacement doesn't stay shut, the spring keeps disengaging and making it harder to deploy. Slowly trying to get used to it, though I don't hardly use it as much as I once did living on a mountain farm next to a river. It was my "go to" for priming the river pumps, getting the junk out of the river strainers, and other things. The good times. 8)
-
@Xelkos said:
My First Crunch was way better than the replacement I was sent. Stupid me tried to cut the final area of a stuck stainless steel link, and my heart fell when the Crunch head broke. It did go in a "soft crunch" ... and I'm here crying, NOOOOOOOOOOOOOO!It's replacement doesn't stay shut, the spring keeps disengaging and making it harder to deploy. Slowly trying to get used to it, though I don't hardly use it as much as I once did living on a mountain farm next to a river. It was my "go to" for priming the river pumps, getting the junk out of the river strainers, and other things. The good times. 8)
I got mine pre loved. It was also a little off and didn't stay shut etc. Hammer and nail punch took care of that though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
















What is that tool it's resting on??