3 part butterfly opener - plier and scissor heads
-
@Lynn LeFey said:
(referencing the head design on previous page...)The head design on this turns a 'Mr. Pinchy' into a 'Mr. Mangly'. Imagine the skin of your palm crammed into those scissor blades while working the pliers. Interesting idea, but I think it needs to be dropped.Agreed!
I feel bmot's suggestion is currently the strongest. In order for it to function is would require an S or Z shaped "backspring" running across opposite corners and offset pivots. Also, there's nothing to stop that being repeated in subsequent layers to allow almost full length tools to be incorporated such as knife/saw/file/drivers. If well planned, it might even be possible that the length of the pliers and shears could exceed 50% of the overall tool length and slightly overlap when stowed with the spring running between them
-
@50ft-trad said:
@Lynn LeFey said:
(referencing the head design on previous page...)The head design on this turns a 'Mr. Pinchy' into a 'Mr. Mangly'. Imagine the skin of your palm crammed into those scissor blades while working the pliers. Interesting idea, but I think it needs to be dropped.
Agreed!
I feel bmot's suggestion is currently the strongest. In order for it to function is would require an S or Z shaped "backspring" running across opposite corners and offset pivots**. Also, there's nothing to stop that being repeated in subsequent layers to allow almost full length tools to be incorporated such as knife/saw/file/drivers. **If well planned, it might even be possible that the length of the pliers and shears could exceed 50% of the overall tool length and slightly overlap when stowed with the spring running between them
Indeed, that´s what I was thinking, practically a Wenger Ranger-like design, where the other tools/blades could be in other layers.
-
-
-
-
Very nice design work, Ombudsman.
I notice a bit SOG Powerduo influence there. I'm not sure if both the full sized pliers and sheers would fit in the middle handle though. Might need to make them a tad smaller. 
-
-
@Ombudsman said:
This is how it may look with tapered ends which could include driver bits or bit holders
Very helpful artwork Onbudsman

That "closed" taper nestling on the inside does make it look a little pinchy. A more flush sitting Wenger style lever arm (using the z shaped spring mentioned before) would eliminate that, and still allow other layers for supporting tools
-
Thnxs !
its just a composition made in Power Point ! 
I like the idea of having 2 Wenger style levers but instead of a z shaped spring, both heads can be opposite in the same layer with the levers on top of each other

That will also fix the problem of dealing with the different widths of the pliers and the scissors.
-
@Ombudsman said:
Thnxs !
its just a composition made in Power Point ! 
I like the idea of having 2 Wenger style levers but instead of a z shaped spring, both heads can be opposite in the same layer with the levers on top of each other

That will also fix the problem of dealing with the different widths of the pliers and the scissors.
Hmmm ....
... I think if you did that you would always have to open the lever for the one you didn't want to use to get out the one you do (as the end of the lever would sit on the head of the opposite tool) which could get annoying pretty quick. The othe benefit of the Z spring is the pliers and scissors could be long enough to overlap (allowing larger pliers and shears, as well as used independantly without disturbing the other tool -
Make the centre rectangular piece convex on both sides, and make the handles on either side of it curved.
That should mean it gives a more ergonomic grip when using either the pliers or the scissors, and should prevent problems with pinching.
I'll try making a sketch in paint when I get a chance.
-
-
@Metropolicity said:
I'll post this here for reference. Not ideal but its proof of concept on a smaller scale.

sThat is really cool
I love it. If you guys are still working on it I was thinking for the pliers if instead you used LM Crunch pliers so it doesn't have to be fully connected the whole time, and that would give some flexibility to the design. -
Bump!
I have found a similar tool (of questionable quality, judging by the pics) on eBay:
I think I need to sacrifice myself for MTO and get one...

-
Hm, interesting at least, would like to know how it performs. And cool of them to make something of their own instead of knocking off known designs.

-
That does look interesting, although that Phillips driver does look suspiciously small.

I look forward to the pics and write up, Thomas

-
-

-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
