The Dremel (or clone ) Owners Club
-
I wonder if there is a dremelwiki to get more information?
Time to googlize-
-
Dremel came out with a very smart attachment, it attaches to the collet nut on both the tool or the flex shaft, and adds a fan, this way as you are grinding/sanding/engraving, it blows all the debris off of what your working on to give you a clean view! Here check it out.. JR
http://www.dremelnewsroom.com/epks/Spring2013/DustBlowerFactSheet.html -
that's pretty cool
-
That looks cool. Wonder how big it is? I love the dexterity that is allowed with my dremel, I'd hate for an accessory to get in the way.
-
Anyone know of a good source for wire brushes , I go through them quite quickly when using them to clean stuff , mainly getting rust off old tools etc.
I am thinking of just getting a bulk lot ,10+ from a Ebay seller ie made in China

-
@MultiMat said:
Anyone know of a good source for wire brushes , I go through them quite quickly when using them to clean stuff , mainly getting rust off old tools etc.
I am thinking of just getting a bulk lot ,10+ from a Ebay seller ie made in China

yeah perhaps offbrand options will work, but the actual ones should last longer/do a better job... but how can you argue with 10:1 pricing... ie 10 cheap ones for the price of one dremel...
I finally broke the cherry on my new dremel, cutting our new folding door to size... did a great job vs cutting by hand (as I started to do it...
) and compared to the offbrand B&Q tool I had it's day and night. -
this looks very awesome: http://www.shapeoko.com/
-
That does look really awesome!
Def
-
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR



-
@MadPlumbarian said:
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though. :tu:
-
was in kmart looking thru the tool section and saw this sitting alone. I wanted one but figured with the limited use I didn't want to shell out the bucks, however this was on clearance and so were many of the bits. ive used it already and wow this little guy is awesome. I know its not variable speed or one of the higher end units but I like it and it should serve me well.
-
@Aloha007 said:
was in kmart looking thru the tool section and saw this sitting alone. I wanted one but figured with the limited use I didn't want to shell out the bucks, however this was on clearance and so were many of the bits. ive used it already and wow this little guy is awesome. I know its not variable speed or one of the higher end units but I like it and it should serve me well.That's great, JR
-
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though. :tu:
That is so very cool :tu: From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...
If anyone need help with any spanish translation let me know :tu:
-
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though. :tu:
That is so very cool :tu: From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...
If anyone need help with any spanish translation let me know :tu:
Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
-
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

-
The concept is great... wonder what it would take to fully build it though... it doesn't look overly complicated...
-
Im planning on giving a try on the future when i have some spare time. I think the bench could come from something else like a bench drill or something. The biggest challenge would be the research time to make the specs for everything, but the actual building shouldnt take that much.
Also it doesnt have to look that pretty to make it work :D
-
[quote author=MadPlumbarian link=topic=43758.msg744236#msg744236 date=1372524375]
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

[/quote]
Hey I tried! :( how bad did it translate? JR -
I good rule of thumb with those translators is to feed the translation back through and see if it still sounds coherent.
I wonder if there's any more to that project than the 3D renderings. And perhaps it could be passed on if they are no longer interested in it. I'm sure if we could rope in some machining pros we have on board here we could at least build a few prototypes :D
As I see it, the main issue is that it'd be a PITA to switch modes... thus almost requiring you to either keep it always the same, or have multiple versions to be able to switch your Dremel quickly. I know when working on a large project with multiple parts it's easier to do stages and try to do all the similar parts on each tool in groups to save setup time and ensure consistency throughout. I built a inlaid panel chest in school (it was a total overachiever project, and my shop teacher loved me for it) and a lot of the process was running a number of parts through the same setup, changing the settings, doing another pass... a lot of labour but it came out nice in the end considering the time crunch and lack of skill I had at the time.
-
[quote author=enki_ck link=topic=43758.msg744245#msg744245 date=1372525059]
[quote author=MadPlumbarian link=topic=43758.msg744236#msg744236 date=1372524375]
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

[/quote]
Hey I tried! :( how bad did it translate? JR
[/quote]Sorry if you misunderstood it was a joke! it translated fine except as all translators the wording was a bit odd (that was the joke about)
Sorry again if you thought it wasnt funny and if they didnt reply that message it wasnt because of the message but they surely dont check that blog anymore.Ill try to check if there is an email posted somewhere and contact them directly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login