Any love for Wenger?
-
One is an Esquire. The one with blade,nail file & scissors.
-
Thanks - I knew the "standard" scaled version had this name but did believe this Version might have a special name.
-
I would never have believed that the Swiss would use........GLUE!!

NEVER, say it aint so :ahhh -
@lowtech said:
Here are two Wengers, an 85 and a 65, i bought recently:Nice variants with SS scales. I did not find the model numbers or names in the WIKI.
But I found out that the scales are glued on and that the glue will be dissolved by Swiss Army Weapon Cleaning Oil....
It does a good job of cleaning debris and gummed oil, too btw.I would like to know the model names and what kind of glue you would use to reattach the scales.
The 85mm is a Stainless Traveler. There's also a Stainless Serrated Traveler. Both were sold in the U.S. with the same number, 16632. Don't have the European numbers in my notes.
-
I was pretty surprised, too.
You learn something new everyday...I´m thinking about non-acidic Silicone to reattach the scales.
-
Thanks, Guys!
Would it be heresy to put the scales on another Wenger of my liking? (Say my new Minathor, for example) or are the Stainless ones common enough that collectors won´t
me when I do so?Edit:
Or maybe a Blackout would look hot with those scales, too...
-
Would it be heresy to put the scales on another Wenger of my liking? (Say my new Minathor, for example) or are the Stainless ones common enough that collectors won´t
me when I do so?Edit:
Or maybe a Blackout would look hot with those scales, too...
There are one or two purist collectors (not me) who would accuse you of forging a fake, but all the modders here would say go for it.

-
I have no bad feelings modding my stuff. I only hold myself back when I know the item is a rare or collectors item and I can do my mod another way, too.
For example, I´d not tear apart a perfectly fine old clip point / 5 winds corkscrewdriver SAK just to harvest a scissor layer without a backtool. -
@lowtech said:
I have no bad feelings modding my stuff. I only hold myself back when I know the item is a rare or collectors item and I can do my mod another way, too.
For example, I´d not tear apart a perfectly fine old clip point / 5 winds corkscrewdriver SAK just to harvest a scissor layer without a backtool.The silver colored stainless handles are a fairly recent standard production item that showed up on a half-dozen models. Some of the fancy versions with cigar cutter might be rare, but I doubt the Traveler is.
-
I have a brushed stainless Traveller and a brushed stainless Pocket Tool Chest, and the adhesive has held just fine on those and they've had a good amount of pocket carry and use. The fact they use adhesive doesn't surprise me, as it would be difficult to secure a pressed shell like that another way. Might be worth tracking down some of that 3M tape that the nite ize pocket clips are attached with .... although I think you only get one shot at lining it up with that stuff :ahhh :ahhh :ahhh
-
According to this topic
</topic/43091
the Dynasty/Diplomate serie has the scales glued as well.
I have a King Arthur just coming back from Delémont which should have the scales (provided by me) replaced (by Wenger).
Will post pictures when I'll get it. -
I have nothing to complain about - The glue held just fine until i immersed the knives in the cleaning oil.
I think teh outer liners of the knives are formed difefrent than on plsatic scaled models, right? Or is this just a newer/older version of the Liners? -
The liners on Wenger have changed quite a lot over the years (there is a thread about it somewhere), which might explain them looking different
-
-
My new wenger
-
Nice one!
I don't understand why Weber insist on putting that ugly sticker over the Wenger one. It is not even possible to remove it without damaging the Wenger box label.I recently received from Delémont few knives I sent for repairs.
One of this was an Automobilist (1.53.03)/"Tool Chest original model", with the old car image <u>hot stamped</u>.
Since I happen to have a newer model of the same knife (with the old car logo <u>printed</u>), with much surprise I noticed that the tools configuration is different.
See attached pictures (image of the old car hot stamped on top, printed on bottom).
I have saved on my pc a picture of the Tool Chest with the old car image hot printed, and the tool configuration is exactly as in my knife. So, my knife was not a custom order.
If you look closely at the catalog pictures (1991 North America and 1995 Europe), you will notice this difference, expecially looking at the pliers position.
However, the older catalog (1991) seems to have the same tool configuration as my newer knife (the pliers seems closer to the main blade)....


-
@stressmaster5000 said:
....
Oh, I forgot. Here is a nice Wenger knife to look at.Yes, that's a NICE knife.
-
Here is was...checking this thread as usual to see what's new and it finally really sunk in for me. WTF?!? No more Wenger?!? And although quite a delayed reaction, I still can't believe there will soon be no more Wenger knives. I'm just glad to have been able to stash a few away in the recent months for my collection. What else can I say... no...more...Wenger... :'(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






