What is being carried today ?
-
Standard stuff, just changing to a hiker over the super tinker, the saw over the scissors ?

-
@colt 1911 said:
Standard stuff, just changing to a hiker over the super tinker, the saw over the scissors ?I'd go with scissors over saw on a SAK, especially when I have a saw on whichever MT I'm carrying (except the PSTII). That would be overkill, but who in the blue blazes am I to talk about overkill
Talk about overkill, I've got 5 different knives on me right now, and a couple scissors, multiple drivers, etc. I've no place to speak about overkill, that's for sure, unless of course I'm condoning it, which I do :D ;)Speaking of overkill again, I think I have my solution to adding the Crater to my lineup. I'm reverting back to the 6 week rotation, which gives the PSTII and KF4 their slots back. I will have to remove the Micra and Executive from any carry at all to allow for the Crater, but I could carry one of them each week if I put it in my left pocket or chest pocket. So yeah talk about overkill right
:ahhh 
-
Standard stuff, just changing to a hiker over the super tinker, the saw over the scissors ?
I'd go with scissors over saw on a SAK, especially when I have a saw on whichever MT I'm carrying (except the PSTII). That would be overkill, but who in the blue blazes am I to talk about overkill
Talk about overkill, I've got 5 different knives on me right now, and a couple scissors, multiple drivers, etc. I've no place to speak about overkill, that's for sure, unless of course I'm condoning it, which I do :D ;)Speaking of overkill again, I think I have my solution to adding the Crater to my lineup. I'm reverting back to the 6 week rotation, which gives the PSTII and KF4 their slots back. I will have to remove the Micra and Executive from any carry at all to allow for the Crater, but I could carry one of them each week if I put it in my left pocket or chest pocket. So yeah talk about overkill right
:ahhh 
Dude you are the Master ! I am just trying to find that perfect Sak for my work edc. Really the Sak is for lunch and food prep. The wave and sog do all the nasty stuff. Maybe a compact would be the answer.
-
Standard stuff, just changing to a hiker over the super tinker, the saw over the scissors ?
I'd go with scissors over saw on a SAK, especially when I have a saw on whichever MT I'm carrying (except the PSTII). That would be overkill, but who in the blue blazes am I to talk about overkill
Talk about overkill, I've got 5 different knives on me right now, and a couple scissors, multiple drivers, etc. I've no place to speak about overkill, that's for sure, unless of course I'm condoning it, which I do :D ;)Speaking of overkill again, I think I have my solution to adding the Crater to my lineup. I'm reverting back to the 6 week rotation, which gives the PSTII and KF4 their slots back. I will have to remove the Micra and Executive from any carry at all to allow for the Crater, but I could carry one of them each week if I put it in my left pocket or chest pocket. So yeah talk about overkill right
:ahhh 
Dude you are the Master ! I am just trying to find that perfect Sak for my work edc. Really the Sak is for lunch and food prep. The wave and sog do all the nasty stuff. Maybe a compact would be the answer.
Why thank you ;) I think I'm just a bit sick in the head and too obsessive over this type of thing, but I can't deny that I enjoy it >:D If you really only use the SAK for lunch prep, the Compact would be a good one to carry, plus it has other little goodies in it to be useful, plus it's only 2 layers. If you use the small knife at all on your SAKs for food prep, then the Compact won't work (if you really need the small blade anyway). I'm surprised you don't have a Compact already based on the photo I've seen of your collection ;)
-
Let's see if I can get a pic to work from my phone....
Yay! It worked!!! :)

-
SS Kick and PST ll. PST ll saw some fron line action removing cover plates ALL DAY. The painters are comming to do what painters do. Paint over cover plates. At least the ones my company hires do.


-
Here's what I mean by overkill;)
Sent from my XT901 using Tapatalk 2


-
@Bensasupertool said:
SS Kick and PST ll. PST ll saw some fron line action removing cover plates ALL DAY. The painters are comming to do what painters do. Paint over cover plates. At least the ones my company hires do.
Hey I am a painter, don't lump us all together. lol
-
[quote author=Monrogue link=topic=44823.msg745096#msg745096 date=1372717336]
Here's what I mean by overkill;)Sent from my XT901 using Tapatalk 2
[/quoteYep overkill for sure but I like it. I'll go overkill with ya.

-
Octane during the day, and Vic Spirit this evening
-
C33. Killer knife for the price. How are the drivers on yours ?
-
@colt 1911 said:
C33. Killer knife for the price. How are the drivers on yours ?Mine's the c33 too, but it's just the blade and carabiner/bottle opener, no drivers. I had considered getting the driver version, but it was like double the price, plus with the engraving I wanted, it would have been pushing like $35-$40, which was too much for me. Plus, I really don't need another set of drivers when I carry a MT and SAK that are both equipped with drivers ;) Does yours open a little stiff? Mine isn't that easy to open one handed, but that may be due to newness.
Today I am carrying the Rebar, Yeochamp and Crater. The "lanyard hanging from the belt" carry method is still working fine as long as I keep it slid inward so that the Yeochamp rests in the little change pocket, and is out of the way of the Crater. The only issue I have is that the Crater, even though it's small and thin, reduces the space my hand has when reaching into the pocket. Not a major issue, just something I have to get used to as I haven't had anything in that spot in a long time.
-
C33. Killer knife for the price. How are the drivers on yours ?
Mine's the c33 too, but it's just the blade and carabiner/bottle opener, no drivers. I had considered getting the driver version, but it was like double the price, plus with the engraving I wanted, it would have been pushing like $35-$40, which was too much for me. Plus, I really don't need another set of drivers when I carry a MT and SAK that are both equipped with drivers ;) Does yours open a little stiff? Mine isn't that easy to open one handed, but that may be due to newness.
Today I am carrying the Rebar, Yeochamp and Crater. The "lanyard hanging from the belt" carry method is still working fine as long as I keep it slid inward so that the Yeochamp rests in the little change pocket, and is out of the way of the Crater. The only issue I have is that the Crater, even though it's small and thin, reduces the space my hand has when reaching into the pocket. Not a major issue, just something I have to get used to as I haven't had anything in that spot in a long time.
Yeah i have the same issue when carrying the crater, Mine was a little stiff but i took a dremel with a round sand paper barrel and made the thumb slot a little bigger. that made it much easier to flick out.
-
C33. Killer knife for the price. How are the drivers on yours ?
Mine's the c33 too, but it's just the blade and carabiner/bottle opener, no drivers. I had considered getting the driver version, but it was like double the price, plus with the engraving I wanted, it would have been pushing like $35-$40, which was too much for me. Plus, I really don't need another set of drivers when I carry a MT and SAK that are both equipped with drivers ;) Does yours open a little stiff? Mine isn't that easy to open one handed, but that may be due to newness.
Today I am carrying the Rebar, Yeochamp and Crater. The "lanyard hanging from the belt" carry method is still working fine as long as I keep it slid inward so that the Yeochamp rests in the little change pocket, and is out of the way of the Crater. The only issue I have is that the Crater, even though it's small and thin, reduces the space my hand has when reaching into the pocket. Not a major issue, just something I have to get used to as I haven't had anything in that spot in a long time.
Yeah i have the same issue when carrying the crater, Mine was a little stiff but i took a dremel with a round sand paper barrel and made the thumb slot a little bigger. that made it much easier to flick out.
Right, that's what it seems like the problem is for me. It seems like there isn't enough open space to really get my thumb behind that thumb stud for leverage. Unfortunately I don't have a dremel to work with. Maybe I should invest in one of those sometime as I've seen people here mention dremels multiple times for things like this. It would probably be quite handy.
-
C33. Killer knife for the price. How are the drivers on yours ?
Mine's the c33 too, but it's just the blade and carabiner/bottle opener, no drivers. I had considered getting the driver version, but it was like double the price, plus with the engraving I wanted, it would have been pushing like $35-$40, which was too much for me. Plus, I really don't need another set of drivers when I carry a MT and SAK that are both equipped with drivers ;) Does yours open a little stiff? Mine isn't that easy to open one handed, but that may be due to newness.
Today I am carrying the Rebar, Yeochamp and Crater. The "lanyard hanging from the belt" carry method is still working fine as long as I keep it slid inward so that the Yeochamp rests in the little change pocket, and is out of the way of the Crater. The only issue I have is that the Crater, even though it's small and thin, reduces the space my hand has when reaching into the pocket. Not a major issue, just something I have to get used to as I haven't had anything in that spot in a long time.
Yeah i have the same issue when carrying the crater, Mine was a little stiff but i took a dremel with a round sand paper barrel and made the thumb slot a little bigger. that made it much easier to flick out.
Right, that's what it seems like the problem is for me. It seems like there isn't enough open space to really get my thumb behind that thumb stud for leverage. Unfortunately I don't have a dremel to work with. Maybe I should invest in one of those sometime as I've seen people here mention dremels multiple times for things like this. It would probably be quite handy.
-
OHO tool carry today. The BO Wave and Skeletool. Boy do I like that Wave. I try not to carry it too much because it will result in a Charge model purchase. @ Monrouge, The dremel tool is very useful and can be found at a fair price. I started out with the rechargeable battery model. Then around 30 bucks. It came with a small kit of sanding,cutting,polishing tools.
-
@Bensasupertool said:
OHO tool carry today. The BO Wave and Skeletool. Boy do I like that Wave. I try not to carry it too much because it will result in a Charge model purchase. @ Monrouge, The dremel tool is very useful and can be found at a fair price. I started out with the rechargeable battery model. Then around 30 bucks. It came with a small kit of sanding,cutting,polishing tools.Killer tool huh !!
-
[quote author=colt 1911 link=topic=44823.msg745243#msg745243 date=1372745162]
C33. Killer knife for the price. How are the drivers on yours ?Mine's the c33 too, but it's just the blade and carabiner/bottle opener, no drivers. I had considered getting the driver version, but it was like double the price, plus with the engraving I wanted, it would have been pushing like $35-$40, which was too much for me. Plus, I really don't need another set of drivers when I carry a MT and SAK that are both equipped with drivers ;) Does yours open a little stiff? Mine isn't that easy to open one handed, but that may be due to newness.
Today I am carrying the Rebar, Yeochamp and Crater. The "lanyard hanging from the belt" carry method is still working fine as long as I keep it slid inward so that the Yeochamp rests in the little change pocket, and is out of the way of the Crater. The only issue I have is that the Crater, even though it's small and thin, reduces the space my hand has when reaching into the pocket. Not a major issue, just something I have to get used to as I haven't had anything in that spot in a long time.
Yeah i have the same issue when carrying the crater, Mine was a little stiff but i took a dremel with a round sand paper barrel and made the thumb slot a little bigger. that made it much easier to flick out.
Right, that's what it seems like the problem is for me. It seems like there isn't enough open space to really get my thumb behind that thumb stud for leverage. Unfortunately I don't have a dremel to work with. Maybe I should invest in one of those sometime as I've seen people here mention dremels multiple times for things like this. It would probably be quite handy.
http://www.harborfreight.com/catalogsearch/result?q=dremel
[/quote]Thanks for the link. All that stuff seems so cheap. I was expecting dremels and accessories to be more expensive for some reason. I may have to get me one of those sometime

-
OHO tool carry today. The BO Wave and Skeletool. Boy do I like that Wave. I try not to carry it too much because it will result in a Charge model purchase. @ Monrouge, The dremel tool is very useful and can be found at a fair price. I started out with the rechargeable battery model. Then around 30 bucks. It came with a small kit of sanding,cutting,polishing tools.
Killer tool huh !!
Indeed it is.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login