Catch a Coyote by its Tail ANNIVERSARY GIVEAWAY!
-
OK here is the only story worthy of telling that I have.
Last year during spring we had a bad hail storm that knocked out my front windshield and dented the car up pretty bad. I have a Lincoln Town-car with a soft cloth top. The cloth was in pretty good shape so we fixed the windscreen and left the rest alone since we planned on replacing the car. My brother-in-law died suddenly at age 54 so we needed to travel out of town for over 100 miles and when the funeral was over we stayed for a bit but needed to come back home that same day. Well little did I know the cloth had developed a small spot where it came loose. We are driving in a dark and desolate area of Texas when I heard "riiiiip"! and loud flapping outside. I slowed down and made it to a lighted rest stop(basically a parking lot with lights but nothing else). The cloth top had started to tear away on the passenger side. I made some repairs with duct tape and some bungee cords that I thought would do the trick.
Off we go again and after about 3 miles the whole thing ripped loose from the passenger side and front covering the driver side windows and the rear window so I could not see out. This time we are in the middle of nowhere with no lights. I pulled off at an exit to (nowhere?), seriously it was in the middle of it. So out came my Wenger Swiss Grip that I have in the glove box, a large black user model I have. I made short work of cutting the material off while my wife held our little key chain photon lights so I could see. I folded up the large cloth and threw it into the trunk and away we went.
-
Had a leaking rubber hose in car right near hose clamp, was able to slice the bad part off with Leatherman Wave knife and tighten hose clamp with bit driver, its still holding up after 4-5 months! Thanks for the great giveaway.
-
My story happened just this past weekend. My wife and I were traveling to a wedding for our side business. Our vehicle to transport all of our gear is on its last leg, but we're trying to limp it along as long as we can. Anyways, we get to the venue, 2 hours from home, and start hauling gear in. Someone else that was there setting up said, "looks like you've got a bit of a problem with your car". I go outside to take a look and there's coolant pouring out from underneath. Low and behold, we blew a radiator hose. All I had with me was my Wave and a maglite. After about 2 hours, a borrowed vehicle, 3 trips to auto zone, and a busted knuckle, we were back up and running.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-
Great stories everybody!

Just a pair of memories using MT's
The first and most recent was my brother telling me WTF is that and why is it working on my Switch? Hes the prim and proper older brother with this cocky hier in his head. Dork! Were hicks and he just couldnt embrace it. I just recived the the BO wave and couldnt wait to test it out doing some "DETICATED TOOL" related work with it.had a fun time workin the new toy on some paid work. He got over the Multi tool use when that Multi installed the 3-way switches he always wanted. Plus I told him it had a cuticle pusher and nail file for his soft feminine hands. Then a jab to the ribs followed. The other time was testing out the then new Skeletool with the ST300 on the old ratty push mower. Gave it a tune up after the winter for the seasons work. New air cleaner,spark plug,fuel filter,oil change,fuel change,wheel snugging up and a little throttle adjustment.(long long grass}The whole time this was goin on Sage the hound dog barked,howled and growled at me and the old mower. I couldnt have been happier at that moment. My puppy,10+year old mower and a new glimmering Stainless multi tool. -
Well..it's an old tale, but here goes. More years ago ( most def pre-Leatherman era) I was in a friend's car, driving down a back road when we spluttered to a stop, miles from any town.
It sounded like a fuel problem, so up with the hood for a check out. Eventually we figured it was a blocked jet in the carby. Only problem was my friend had left his tool box behind :(
So, out with my trusty Swiss Army knife and we soon had carby stripped down and jets cleaned. Yay for SAKs :) Not a very exciting tale..but I taught me the value of carrying some sort of what's now called a multitool :sak: -
great Multi stories folks,
when i joined i mentioned i am a small business and don't require a lot of tools but having a multi on my person is essential. I work off ladders often and really want to stay a light as possible while 20-30 feet up or walking across roofs. its always about safety first and being able to access a tool strapped to my side capable of nearly all tasks thrown at it has given me a great sense of confidence while off the ground. from 100 year old homes to some of the most expensive property in my area my LM has not been let me down. literally my tool box is whatever LM i have strapped to my side. Pictures added for the WIN!!!!!! good luck to all who posted such great stories.
-
Another time I was SAVED by my multitool was when I was in the Navy. I was working aloft on the radar dish while under-way, after a roll that was larger than the others I had become use too hit, I fell a little, and my safety harness got tangled in a bar I had to loosen to do my work. I could not get it undone by my self, because it was behind me. I pulled out the original Super tool (I lost it while in the navy :( ) and reached up and cut that portion of my harness off. I was glad to be loose, however the safety people did not like what I had done to their harness.
A few months later ALL of us who climbed the mast on the ship were issues multi-tools.

-
I posted this here years ago and it's on leatherman's website somewhere, back when skeletool first came out I had a CX clipped to my belt loop while working outside. When I found out I had locked myself outside with absolutely no way to get in (try to coax the cat to jump up and hopefully turn the locking lever on patio door proved to be fruitless). Eventually I managed to disassemble the basement window and security bars with the skeletool alone, and saved myself a lot of trouble.
-
Just last week on the job I used my Rebar to save the day for someone else
One of the other trades cutting torch was jammed up and not cutting properly :ahhh I pulled out my MT and got the file out and with a few file strokes and a small piece of wire it was cleaned and they were back in business 
-
My last girlfriend bought an enourmous wardrobe for her house that weighted a lot. Two guys brought it and managed to lift it through the 40 meter long hallway that led to my girlfriend house. This hallway was narrow and the entrance door was at 90 degrees with a narrow entrance also. They were fiddling with the positioning to manage to make it pass through the door somehow, first i used the bit driver to remove doors and other removable parts out and found a clearance. But when trying to push they found that a huge vine that covered entirely one of the walls had a branch so big (at least two inches) that was stealing all the clearance for the wardrobe to turn.
It was a sunday at 7 am, so no hardware stores and my girlfriend had no tools of any kind. So i pulled my wenger saw, hacked that huge branch in seconds and the wardrobe finally got in

-
I have several stories but, this is the best. Less than 100 miles into an 800 mile trip the antennae broke on the rental car. No radio.This was pre iPod days. I unwound a wire hanger, but it didn't fit because of the twists. I pulled out my swisstech style key chain pliers and cut the hanger. The radio worked. I've been hooked on Multitools ever since. I had received the tool as a present the day before. Now I never go anywhere without at least one Multitool.
-
I was at my nephew's place a couple of weeks ago and he was trying to cut a new roll of paper towel in half with a dull knife. He was making absolutely no headway so, quick as lightning, I whipped out my Charge TTi and, opening the serrated blade, I handed it to him. Using this he easily went through the roll, like butter. I listened with great satisfaction as he exclaimed, "I gotta get me one of these!".
-
I have so many saved the days from my time in the Army but my favorites have to be when I'm the only one with a cork screw or bottle opener
good luck everyone who enters this and thanks Nickola for hosting the giveaway 
Sent from the Millennium Falcon via starblaster
-
I have more interesting stories than this but for some reason this is all I can think of.

Ok so I was on MTO on my laptop. My laptop's battery being old, has pretty much gotten to the point where it lasts only a few minutes unplugged. When suddenly the screen turned black. It was plugged in so I didn't know why it turned off. Then I looked down and realized my great dane who is bigger than me but a puppy had chewed through the cord. So I pulled out my wave. I cut off the casing on the cord and successfully rewired it. My laptop could charge again and I could view my MTO. Later though I decided I should do it the "right way" and took it back apart and re-soldered it.
-
Here's another creditcard story.
Several years ago, before my MTO days, I stopped at a unmanned gas station to refuel my old Toyota Carina. At the other pump stood an elderly and scratched his head fiddling with the cardmachine at the pump.
As I finished refueling my car, the old man came over to me and asked if I could help him use the cardmachine, as he could not get it to work. I followed him over to his pump, and quickly discovred what was wrong. The old man had two cards, one credit card and one bonus card. He had never used this bonus card before, so he had put the bonus card into the card slot in the machine, and then jammed the creditcard into the receipt printer...
He had jammed it in so deep that he could not get a grip on it to pull it out.Now, this was before my MTO days, so I did not have a Wave issued to the car, like I do now. Luckily I had a LM Style on my keychain. I used the scissors on the style to horizontally get a grip on the card and pull it out.
The old man was very embarassed when I explained what he had done wrong, and was very thankful that he had not been forced to call the servicenumber to get help. I don't think he ever used a unmanned station again. -
A couple of years ago we were out the back of the property we go shooting on at Thargomindah, 1100km west of Brisbane. Talkin SERIOUS outback here.
Now, cattle properties out west are measured in square miles, not acres and we were about 20 miles from the homestead and still only 2/3 of the way to the back boundary.
We had got a little stuck crossing a dry creek-bed and in getting the vehicle out had managed to rip a fair section of the exhaust system off.
The place we were looks like this...
...in pretty much any direction you look.
With the aid of my Wave we used some old fencing wire to tie together what was left of the exhaust and make some hangers for it. At least we managed to get the end of the exhaust out from under the 4WD so the rest of the day was a little less uncomfortable.
Needless to say with an open exhaust we managed to scare off every hog within miles and never saw a thing until we had fixed the exhaust properly that evening back at the main workshop shed.but the wave saved the day initially.
-
so many stories to choose from... this giveaway is making me think way too hard. :P
a few years back, my wife and I were helping some friends prepare for their wedding. they were on a somewhat limited budget, so they were decorating the hall/room being used for the reception themselves, and we were helping. the bride (one of my wife's best friends) wanted icicle-style Christmas lights hung from the rafters of the room. We had plenty of lights, but no way to hang them up... or so they thought. I went up on the ladder and noticed some old nails sticking out of the rafters that had probably been used to hang decorations many years before. However, the lights were too heavy to hang on the nails without falling off... until I pulled my Charge Ti out of my pocket and started bending the nails one by one to turn them into makeshift hooks. :D It took awhile, but we got the lights up exactly how she wanted them. Later that weekend, at the actual wedding reception, the bride came over to me with a huge smile on her face and thanked me again for improvising a solution for the lights. She then promised me, "I will never make fun of you again for always carrying a Leatherman!"
we're still good friends, and she has kept that promise to this day. :)
-
To continue the Leatherman theme:
I own and restore old Land Rovers. Back in the mid 1990's I was driving my 1967 Series IIa Land Rover to upstate New York for a Rover Rally. I decided to follow only backroads, for the adventure (well and the Rover tops out at around 64 mph). Here's the truck:
Somewhere north of the Poconos, the truck just stopped. As in the engine just shut off. Getting under the hood (after letting it cool a bit), I realized I had made a foolish mistake when I rewired the truck.
Land Rovers of that vintage have only 2 fuses for all the truck electrics. In order to protect the harness I had so lovingly installed, I put a 25A slow blow fusible link in the main harness coming from the alternator that leads into the main part of the wiring harness. The soldered connector had broken at the fusible link. So, although the alternator was charging the battery, no current could get to the rest of the truck! :ahhh
I pulled out my Leatherman PST, and removed the offending fusible link but the cable was too short to span the gap. :ahhh. I only had a couple options to get back on the road. I decided to open the boombox I had (Remember Boomboxes?
) and pulled out several wires from it. I used 4 different 18 ga wires to make a wire large enough to carry the current that the 8 ga main cable delivered and spliced it in, again with the Leatherman PST.Truck started right up and I even was able to partake in some of the offroading at the rally! (We were at a ski resort, so a lovely big hill to play on).
-
Just this past Saturday, I was visiting my relatives, and had a bunch of MTs I'd brought to show my nephew. My brother-in-law, who knew I had a bunch of these, asked to borrow one, to unscrew a broken lightbulb from a light fixture. That light fixture was the only power to their barn, where they wanted to set up some music equipment for a party. I handed him the one I'd miss the least, in the event things went wrong: The Ozark Trails (Walmart brand) tool. It did the job and (maybe unfortunately) returned mere minutes later, unscathed.
Even the cheapos occasionally get their moments to shine.
-
It was the first time i'm meeting my would-be father-in-law, and I have been warned by my girlfriend then that her dad is a very reserved man, says less and do more. A retired engineer that has seen lot of major construction project under his command. I was not into Leatherman's then. Im a SAK guy. I really have no idea what present to give for my introduction, Then I decided to get him a Leatherman.
The available tool at my local store that time was some multitools named after a baby food brand
and a Leatherman Surge. It was a no brainer.Fast forward to 4 years.. Ive given him Leathermans EVERY christmas (Wave, Charge and Supertool 300) and each time he opens the gift from me, He knew it was a Leatherman.. but still, eager like a kid for a new toy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
