SAK blade closing
-
You bunch of snappers. :ahhh
:D
-
Let it snap
The noise you hear is the kick (at the tang) hitting the spring, and the blade edge is not going to be damaged unless something else is in the way as already mentioned. In theory it could shorten the life of the spring, but in reality I don't think there's anything to worry about at all .... so long as your fingers are out of the way :ahhh :ahhh -
Usually snap, but I did have a Cybertool where the blade would slam into the backspring pivot, so that got closed slowly.
-
I avoided snapping for decades, until reading posts here and the SAK Owners manual. Now I snap with all my heart and enjoy the sound and feeling.
-

I'm not sure actually why I don't let them snap. I do it one handed and all but this just feels right.

~~Hopefully the video will be viewable. ~~ Youtube then. ::)
-
Oh no, Im not trying that one handed trick again! I cut myself good last time! :D
-
-
I, like many members here no doubt, often sit watching TV with an Alox SAK in hand opening and closing the blade listening to that SNAP... chewing gum for the hands...
As others have said, the only problem I've had is letting a brand new Wenger SI (no date code one thankfully) bite its own bail :ahhh
-
I usually let it snap, except one that bottoms out. That one handed trick looks pretty cool.
-
On some models the blade will hit backspring and dent the edge, if yours doesn't I don't see why not.
-
I have a huntsman that the blade has a slight dent on from hitting when closing. I still let it snap though.

-
The video of one-hand-opening matches that described in the SAK Owner's Manual, with an important difference: the guy puts his thumb against the blade-edge twice. This will enevitably result in the need of a bandage if done with a properly-sharp blade. The blade shown is surely very dull -- or the guy bleeds slow -- it is a short video.

-
@Syph007 said:
I let it snap like it wants to. :D Its why the liners are softer material than the blade. If it goes too far it will hit the softer Al or nickel silver and nick it, but should not harm the knife much. That being said Ive had models form the factory that when closed, will touch the liner, and thats not right.Does that go for your models too? JR
-
@J Mackrel Jones said:
The video of one-hand-opening matches that described in the SAK Owner's Manual, with an important difference: the guy puts his thumb against the blade-edge twice. This will enevitably result in the need of a bandage if done with a properly-sharp blade. The blade shown is surely very dull -- or the guy bleeds slow -- it is a short video.
Challenge accepted. :P
That's actually me opening the knife. ;) So you want a video with a shaving sharp SAK?
-
Thanks for all the advice...I think I'll let it snap.
ChefRichie
-
Another snapper here. :D
As for one handed opening of a SAK, though I've never read the SAK Owner's Manual I do it this way;
-
@J Mackrel Jones said:
The video of one-hand-opening matches that described in the SAK Owner's Manual, with an important difference: the guy puts his thumb against the blade-edge twice. This will enevitably result in the need of a bandage if done with a properly-sharp blade. The blade shown is surely very dull -- or the guy bleeds slow -- it is a short video.

Challenge accepted. :P
That's actually me opening the knife. ;) So you want a video with a shaving sharp SAK?
OK, here goes, just for JMJ. Calling my Wenger SI dull.

:D
I did end up with a bold patch on my forearm though
What I don't do for you guys. 
The repositioning and touching the blade twice in the first video was cause I was doing it while filming myself with the cell phone in the other hand. ;)
EDIT: spelling
-
It is not a major problem with saks but with some slipjoints it is possible to hit a pin or the spring and damage the blades edge. Remember that the edge will be harder than them but also thinner and more fragile. The same way you can damage a blade cutting wood. Personally I lower the blades slowly, just in case there is a finger in the way.
tapa beta
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








