What is being carried today ?
-
The mads handy pharmber with sheath and steel! :) JR
How does it feel to have your set all complete and finally be carrying it? Right now I've got my Mechaneer, but once I actually get dressed and ready to head out for the day's festivities, I will probably be carrying what I've been carrying this week: Rebar, Yeochamp and Crater

I wouldn't know, I haven't put it on yet, I'm nervous, won't be leaving for a few more hours, so till then it sits on my dresser looking at me. JR
Oh I see. I'll be leaving in about an hour, so I'll be gearing up shortly. I always have to have at least one item on me. The only time I don't (while awake) is when I first get up in the morning to get ready for work.
-
Sorry not the best pic, but it was a quick snap cause were going to the door in a few sec, JR

-
Going light today with Wenger picnic " 1 layer " and a pst II.
-
In honor of Independence Day, I'm forgoing my usual Vic, and carrying the Camillus US (DEMO) knife
Sent from my ADR6400L using Tapatalk 2

-
@MadPlumbarian said:
Sorry not the best pic, but it was a quick snap cause were going to the door in a few sec, JR

Lookin' good JR...your Pharmber I mean

-
Picked up a blast this morning, little lighter than the wave, blast 6.9 wave 8.5
Feels really good in the hand especially using the drivers. Tool load out is good but no awl. That will be modded this morning. Total Impulse buy.

-
[quote author=colt 1911 link=topic=44823.msg746764#msg746764 date=1373033943]

-
@colt 1911 said:
Picked up a blast this morning, little lighter than the wave, blast 6.9 wave 8.5
Feels really good in the hand especially using the drivers. Tool load out is good but no awl. That will be modded this morning. Total Impulse buy.

Nice, the Blast is a good one
It's fairly lightweight, but it is a big bulky in comparison to say, the Rebar. However, the Blast has scissors and the fine driver bit, but the Rebar has the awl and serrated blade, as well as the better pliers with the replaceable wire cutters. All while being slimmer and a little lighter. However, the Blast's knife is a bit thicker and longer, so that's a good point for it as well. But whatever, I have both, and they're each in my rotational schedule, so win/win for me ;)I agree about the awl though. Will you be replacing something with an awl, or modding one of the flatheads? I did that to the large flathead on my TTi, although it's not a great awl, but it's better than having a driver I don't really need.
-
I took it over to the grinding wheel but pulled back at the last min. Think I will keep it original. I think it will make the evening rotation. Nice break down on both thanks.
-
@colt 1911 said:
I took it over to the grinding wheel but pulled back at the last min. Think I will keep it original. I think it will make the evening rotation. Nice break down on both thanks.Oh you backed out huh? I can't blame you. It would void the warranty, and because of that, I've occasionally wished I hadn't messed with some of my LMs. Fortunately I don't really abuse any of them to the degree that I would be worried about needing the warranty, but you never know. I've modded several of them actually: Juice S2, Rebar, KF4, TTi and Spirit. I think that's all >:D
-
I took it over to the grinding wheel but pulled back at the last min. Think I will keep it original. I think it will make the evening rotation. Nice break down on both thanks.
Oh you backed out huh? I can't blame you. It would void the warranty, and because of that, I've occasionally wished I hadn't messed with some of my LMs. Fortunately I don't really abuse any of them to the degree that I would be worried about needing the warranty, but you never know. I've modded several of them actually: Juice S2, Rebar, KF4, TTi and Spirit. I think that's all >:D
First i bought the sog powerlock, made it to the car then turned and returned it. Heavy, sheath was horrible " for me " and to use the driver the palm of your hand is getting chewed up by those cams, just was not for me. Driver comfort is high priority on my list and blast has that covered for sure. Anyways that was my 6.00 am lowes trip this morning.
-
I took it over to the grinding wheel but pulled back at the last min. Think I will keep it original. I think it will make the evening rotation. Nice break down on both thanks.
Oh you backed out huh? I can't blame you. It would void the warranty, and because of that, I've occasionally wished I hadn't messed with some of my LMs. Fortunately I don't really abuse any of them to the degree that I would be worried about needing the warranty, but you never know. I've modded several of them actually: Juice S2, Rebar, KF4, TTi and Spirit. I think that's all >:D
First i bought the sog powerlock, made it to the car then turned and returned it. Heavy, sheath was horrible " for me " and to use the driver the palm of your hand is getting chewed up by those cams, just was not for me. Driver comfort is high priority on my list and blast has that covered for sure. Anyways that was my 6.00 am lowes trip this morning.
I agree about the comfort aspect. I don't want to be twisting on it, gripping it with force and feel like I'm going to draw blood on myself. "Nobody makes me bleed my own blood!" I love that line from Ben Stiller's character in Dodgeball :D I've never looked into SOG at all, although I've seen some interesting pics on here, but I don't know anything really about any of their MTs. I've heard good things on here, but they don't seem to be as big or popular as the "big two", LM and Vic.
At this point though anyway, I really don't have any other MTs I want other than an Original Wave and a PST. After those, I think I'm pretty well all set. I have my two custom SAKs, so I really don't need any other SAKs. I'm almost sad to think I don't need/want much more, but it will probably take me a while to save up the funds for the 2 I want, especially since I'd prefer NIB, or lightly used in very good condition. I managed to get my PSTII NIB, so I hope to do the same for the Wave and PST.
-
+1 on the Blast Colt. Surprised to hear its still on the rack for sale. Im carrying Monrouges work horse the PSTll today. Good luck in the NIB Wave and PST hunt.
-
@Bensasupertool said:
+1 on the Blast Colt. Surprised to hear its still on the rack for sale. Im carrying Monrouges work horse the PSTll today. Good luck in the NIB Wave and PST hunt.I know, me too. Now that it's retired, I figured it would be gone, but I suppose businesses probably may still have a stock of them kicking around for a while. I'm glad I got one (my first MT actually) since it's now retired. This will be the first Leatherman I've owned that has been retired after I bought it, which is nice so that I don't have to try to track it down later when people are selling them for inflated "retired MT" prices that are more than I paid for it. Thanks, I don't see NIB of either often on Ebay anyway, and when I do, most times they are not cheap. It will take me several months to accumulate the funds for either one anyway, so by then there may be a good deal if I'm lucky ;)
-
@Bensasupertool said:
+1 on the Blast Colt. Surprised to hear its still on the rack for sale. Im carrying Monrouges work horse the PSTll today. Good luck in the NIB Wave and PST hunt.It was the last one on lowes rack. Glad I pulled the trigger. I just haven't nailed the perfect work sak, My work MT is a wave along with a sog west marine, leaning towards a compact, I guess. Have any suggestions ? Can't go wrong with your edc, pst II is one, if not my favorite MT.
-
+1 on the Blast Colt. Surprised to hear its still on the rack for sale. Im carrying Monrouges work horse the PSTll today. Good luck in the NIB Wave and PST hunt.
It was the last one on lowes rack. Glad I pulled the trigger. I just haven't nailed the perfect work sak, My work MT is a wave along with a sog west marine, leaning towards a compact, I guess. Have any suggestions ? Can't go wrong with your edc, pst II is one, if not my favorite MT.
FARMER! Thick knife,awl,saw,fat driver, it can come in alox ect. I talk like i own it. That would be my personal choice. Im not an EDCer of Vic tools but that one stands out for me. I also started carrying two MT's not to long ago to see what works for me. I myself havent found the perfect combo.
The ST300 and MP600 blunt nose stay at work in the tool belt. For when the tool belt isnt needed and thats alot now in my new position. They get swapped out for different tasks. The Skeletools and kicks are the pocket mainstay so far and good secondary tools for me. They are really there for an extra set of pliers. I also EDC at work the Klein 11 in 1 for the extra nut and bit drivers. Also for when the MT just cant do it. The main MT sheathed I try to stick to something beefy during the work week.
Off days like today the sky is the limit. I hope this little insight into my madness helped out a little.
If you find and buy a blue alox farmer were ganna see who draws a Colt 1911 faster :D
-
+1 on the Blast Colt. Surprised to hear its still on the rack for sale. Im carrying Monrouges work horse the PSTll today. Good luck in the NIB Wave and PST hunt.
It was the last one on lowes rack. Glad I pulled the trigger. I just haven't nailed the perfect work sak, My work MT is a wave along with a sog west marine, leaning towards a compact, I guess. Have any suggestions ? Can't go wrong with your edc, pst II is one, if not my favorite MT.
FARMER! Thick knife,awl,saw,fat driver, it can come in alox ect. I talk like i own it. That would be my personal choice. Im not an EDCer of Vic tools but that one stands out for me. I also started carrying two MT's not to long ago to see what works for me. I myself havent found the perfect combo.
The ST300 and MP600 blunt nose stay at work in the tool belt. For when the tool belt isnt needed and thats alot now in my new position. They get swapped out for different tasks. The Skeletools and kicks are the pocket mainstay so far and good secondary tools for me. They are really there for an extra set of pliers. I also EDC at work the Klein 11 in 1 for the extra nut and bit drivers. Also for when the MT just cant do it. The main MT sheathed I try to stick to something beefy during the work week.
Off days like today the sky is the limit. I hope this little insight into my madness helped out a little.
If you find and buy a blue alox farmer were ganna see who draws a Colt 1911 faster :D
LOL, roger that,,, the hunt is on !! I haven't gone two MT " yet " if i did it would be a skeletool and a wave. I think

-
Pocket carry Camo Fuse with an oat sinnet fob. The one color dosent do the tie any justice. I dont do the tie any justice.

-
@Bensasupertool said:
Pocket carry Camo Fuse with an oat sinnet fob. The one color dosent do the tie any justice. I dont do the tie any justice.Man, like that camo fuse. This addiction is never going to stop.
-
Pocket carry Camo Fuse with an oat sinnet fob. The one color dosent do the tie any justice. I dont do the tie any justice.
Man, like that camo fuse. This addiction is never going to stop.
Thanks.They are a nice LM. The size,weight and most of the tool load I like. Its the only LM model I want to modify. A file or awl would be good in place of that lanyard ring. Theres a few members with camo Blasts that are quite envious.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login