Sharpening Systems
-
Check out the Lansky turn box for a cheap but effective alternative to the sharp maker.
-
I think my spyderco stones need replacing as I can't get any of my knives sharp with it anymore, it used to be amazing but over the past few years its felt like it's done less and less. sadly funds are tight at the moment so I can't justify the expense. Tried wrapping the stones in fine grade glasspaper but I couldn't achieve anything with that either, so going to have some very blunt knives in the near future :-(
-
I use and like the lansky system myself

Bensa

Abstraction,
That sounds odd to me
do your stones need cleaning? (I use lighter fluid to clean mine) -
I'm using the Lansky 5stones system and for the price i couldn't ask for better.
-
Most folks here are all about the Sharpmakers, Spydercos, Lansky's, and those type of systems. But I have a different take on the subject.
I am total pants at hand sharpening systems. But if the knife is already sharp, I can keep it that way with an Accusharp (or similar device) by using a few feather-light swipes on occasion. Very light strokes is the key. A few feather-light swipes on occasion will keep the blade sharp. I kept our kitchen knives shaving sharp this way for a few years until I got an electric sharpener. But once the knife is dull, the Accusharp won't cut it.
Best option: take it to a professional and have them put a good edge on it. It's easier to keep a knife sharp then to completely re-sharpen a dull edge.
But I have found a sharpener that can sharpen a blade from a dull edge. It's $150 but trust me, it's more than worth it: The Chef's Choice 120. It really works, and it's easy. Just follow the directions exactly and you'll get a really sharp edge.


-
get spyderco sharpmaker and ultra-fine stones.razor sharp at 60 seconds.
-
I most often us a Lansky Sharpmaker (5 stone), especially when the blade has suffered some abuse (from previous owner(s)). It works very well.
I also strop afterwards with the back of an old leather belt I got from Goodwill just for that purpose.In between or afterwards, I might use a generic sharpener which lives in the Kitchen.
Also have a 300 and 600 grit diamond plate I bought cheap off of ebay. That removes metal on blades faster than anything, and is the first tool of choice if ever I need to remove blade nicks or uneven wear. -
@Abstraction said:
I think my spyderco stones need replacing as I can't get any of my knives sharp with it anymore, it used to be amazing but over the past few years its felt like it's done less and less. sadly funds are tight at the moment so I can't justify the expense. Tried wrapping the stones in fine grade glasspaper but I couldn't achieve anything with that either, so going to have some very blunt knives in the near future :-(Have you tried washing them with a bit of water and washing powder, I find this works the best for cleaning them.
-
All the croc stick sharpener are similar, spyderco is probably the most refined (and most expensive) of the bunch. None of these remove steel fast, so perhaps a more accurate name is sharpkeeper because if your knife is dull to start with it may take a long time to get it sharp.
There's nothing secret about knife sharpening, an edge looks like a V and as you use the knife tip of the V wears off. When you sharpen it you remove enough steel from behind the tip to form a V again, how you remove the extra material doesn't matter.
As far as paying someone to do it goes, stick with stores that sells high end kitchen knives or someone with reputation on knife forums, at least you won't get a hack who put your knife on a bench grinder.
-
I think my spyderco stones need replacing as I can't get any of my knives sharp with it anymore, it used to be amazing but over the past few years its felt like it's done less and less. sadly funds are tight at the moment so I can't justify the expense. Tried wrapping the stones in fine grade glasspaper but I couldn't achieve anything with that either, so going to have some very blunt knives in the near future :-(
Have you tried washing them with a bit of water and washing powder, I find this works the best for cleaning them.
Yep, washed them plenty of times with a plastic scourer and powder without any real improvement. It could be that all my knives are too dull for the standard stones to touch up now but some of them are fine but can't get to that hair splitting edge they used to manage.
Sent from my Nexus 7 using Tapatalk HD
-
wash them with an old toothbrush and toothpaste.
-
@nervium said:
wash them with an old toothbrush and toothpaste.Magic! Thanks for that! The amount of crap that got off was unreal,considering I'd already scrubbed them with soap and a plastic scourer! The toothpaste was grey :-\ they seem much better now too - not sure some of my knives will get hair poppingly sharp as they're dull enough now I think I need a courser stone to properly get things back to how they should be, but its bringing the rest back to life :-)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login