30 Day Coghlan's Campers Tool Challenge!
-
Day 24-25
Two days of moderate work!Day 24 ended up being a day of dry-packing columns. This means taking bagged grout (MBED, 212, or—this is the new one I'm trying—755), mixing in just enough water to make it pack together when I pound the crap out of it with a piece of wood, and then using this mix (and this piece of wood) to fill the space between a steel column and the concrete foundation to which it is bolted.
What does this have to do with Campy the Campers Tool? I needed to manufacture two things for this job: a packing stick, and a water cup.
The packing stick was a piece cut from a survey stake. Campy doesn't have a saw, so naturally it wasn't expected to do that part. But later, when I needed a thinner pounding stick for one particularly low-sitting column, I did use Campy's knife to cut the splintery pieces from a 4" long, 2" wide piece of scrap 1/4" plywood. I was tremulous about the lack of a lock (like usual), but it worked just fine. I'm sure it needs sharpening again already, but at least it succeeded!
The water cup was (obviously, I suppose) for scooping water from my big water bucket into my smaller grout bucket. I usually mix in small batches so I don't have half a bucket of grout left drying if I get called off to another task (or, worse yet, lunch!), so I don't like dumping, barely controlled, straight from the water bucket. So what do I have on site to use for this cup?
It's a new site, so...nothing! Wait, not nothing...pop cans! So I used the knife to cut the top from a can, and the pliers to fold the edge down so I wouldn't cut my careless self on the cup during use.
As I didn't have a camera on me at the time, I performed a re-enactment on my front lawn. Success? Twice? Well played, Campy!

This can has no idea what's coming, but the Jaws theme is probably playing in the background.
This is a bit like the ending of One Flew Over the Cuckoo's Nest.
Folding the edge down (safety third!)
Finished! Lovely? Well, no, but effective.I'll say one thing for the knife, which is that the blade dulls pretty fast, but only gets so bad before it seems to level out. While it's not good for edge retention, at least it won't get quite as dull as a ball of Silly Putty after a bunch of cutting.
Day 25 is, oddly, the first time I've tested the bottle opener. It works. Now I can enjoy something I don't see often where I live: a beer from Pacific Western Brewing! Honey Brown fun!
The "awl" (the one that looks like a rounded slot screwdriver) helped me marlinspike apart one of those Rocky S2V paracord Survival Grenades (I wanted the parts for my own mini kit). The awl is useful for something! Unfortunately, it was actually kind of a chore, because until I got the end of the awl worked into the knot, it kept trying to close on my fingers. This is like in that one M. Night Shyamalan movie in which we find out that the one character's superpower is Not Drinking Water—it might come in handy, but the circumstances sure aren't going to come up too often.
-
Great work still.
Maybe instead of using the knife blade you could use the can opener to open the can like a normal food can. I have turned soda cans into cups using the can opener on my wave before. -
@Nhoj said:
Great work still.
Maybe instead of using the knife blade you could use the can opener to open the can like a normal food can. I have turned soda cans into cups using the can opener on my wave before.I liked this idea, so I tried it:
The results are pretty clear. But good news:

"And I said 'yeah, baby, yeah!' "The Leatherman can opener did a great job, so props for that. It's just too bad that if I need to do this again next week, I'll still have to use Campy.
Both of them worked when I tried to open the can from the top (like a food-type can), but Campy was pretty slow, since the relatively unpronounced hook under the can opener had trouble latching under the lip of the can (Coke Zero this time, since I ran out of empty Orange Crushes).
Here are the two can openers, staring each other down:

Only one of these is a can opener. The other one is a can't opener.The Leatherman opener is sharpened. The Coghlan's one, however, is the bluntiest blunter in blunt town. Without hooking under the rim of a can for leverage, Campy's can opener...can't.
-
Can't opener?
Try and say that three times fast!
-
instead of using the can opener to remove the entire top portion of the can, use it like you would when opening a food can... remove the top while leaving the top rim intact. See how that works.
-
@Jothra said:
Both of them worked when I tried to open the can from the top (like a food-type can), but Campy was pretty slow, since the relatively unpronounced hook under the can opener had trouble latching under the lip of the can (Coke Zero this time, since I ran out of empty Orange Crushes).It didn't really stand out in my post because I didn't get pictures.
-
I see
-
Hilariously, I got it wrong, did it again, and forgot the pictures the second time.
For the record, from-the-top is a way better idea, so I'm doing that from now on. Thanks, Nhoj!
-
:D You're welcome
-
You are doing Gods work son.

-
Loving your reports mate. :D
-
Day 26
Today was Jothra Is A Meanie Day! I used Campy for all kinds of things, some of which I happen to know are very bad ideas, from a tool longevity point of view.First thing upon arriving at work, I unlocked the most important door on site, which someone had locked overnight for some reason. This is the most useful the large screwdriver has been:

If a Porta Potty door doesn't open, it's really just a smelly paperweight.Then, after some dry-pack grouting (fun, if you're dumb like me), I had to break off a bunch of form pins from the original foundation pour. Normally this is as easy as hitting them a couple of times with a hammer—in today's case, a mini-sledge—but one pin was bent down so close to the wall that I needed to pry it up before I could even hammer it:

See how bad an idea this is? This is a really bad idea.But, maybe surprisingly, it worked, and I finally hammered off the blasted pin:

I've only very rarely pried with the plier tips, because breaky breaky!Next, while working on the pin-smashing, I found a column base I had grouted, but forgot to clean up:

Maybe it's not important, but I like to leave a nice, clean-cut column base.My margin trowel was way on the other end of site (and it's a big site). What to do?
You're not going to believe this, sports fans, but the fish scaler actually did something useful, like, for real.

The picture doesn't really do its awesomeness justice.Finally, someone remembered to bring the grinder, but it needed a blade change. So, do you think we had the special grinder wrench on site?
Bwa ha ha! No.
Good news, though! A time-tested trick performed by no fewer than three (3) of my different Leatherman tools:

No grinder tool? No problem! Like a charm!Don't worry. The grinder was unplugged at the time.
This was a pretty punishing but successful day for poor ol' Campy.
-
I agree you have good write ups. And your added jokes in italics are very funny. 
-
@Lynn LeFey said:
You're not going to believe this, sports fans, but the fish scaler actually did something useful, like, for real.

I still won't be running out to buy tools with fish scalers, but I guess the trick is to use the tools you have, not the tools you want.
Thanks, everybody! More grouting tomorrow? More steel tie-wire? More grinding? A nice panini? Stay tuned!
-
I just tried taking the top off of a soda can with my can opener (on the same tool with different name plastered on it). Strange thing happened... after about 4 or 5 cuts, the top started to split cleanly along a seam, like the pre-scored area of a pop-top. The whole top came off freakishly cleanly. I'll see if I can get pics in the morning.
-
Sorry for the double-post, but here's a pic of the can mentioned above.
The opener started in from the edge, and began creeping toward the rim. Then by the forth or so puncture, it started splitting cleanly along a seam. When I got back around to the start, it removed even most of the bits that I'd missed to start with. Very, VERY clean. Freaky.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




:D :D