Your Main Cycling Multitool
-
In Scotland we say 'you dinnae need ta' teach yer granny how to suck eggs'. Excuse me if this is obvious, I mean no offense. But you are aware of the byrd/spyder wrench? It has a crescent wrench, adjustable wrench, knife and the facility to carry 4 (IIRC) standard 1/4" drive bits.
I mostly ride XC mountain bike and usually end up in some fairly out of the way places. I tend to not get too hung up on the weight of the tools I am carrying. I usually have:
an adjustable spanner
dedicated allen keys: 2, 3, 4, 5, 6, 8, 10
pliers/multi tool pliers/crunch clone
cone spanners
puncture kit + spare tube
chain splitterI prefer dedicated allen keys as they tend to be put under a lot of force. At the very least you need to bring a long arm, ball end 5mm. :D
I guess I do not get too hung up on weight. Whatever I could save by risking fewer tools I could quite easily lose by not going for a dump before I ride. Ahem.
-
Am overcapacity on a '91 Rockhopper as it is, and carrying 3L of water adds to that considerably. Have to stay hydrated, that is a must. Trying to lessen the overall load while staying prepared too.
Have lost close to 40 pounds in the past month due to riding. :DShould of stuck to me wanting to use a Specialized Crossroad Armadillo on the rear and kept it to 65 PSI - that tire has hold 80 PSI. Think the Bontrager LT-3 Hard Case gets stressed out more since it runs at 50 PSI maximum inflation. The front tire gets away from the load.
-
I also carry a 6" crescent wrench, but I cut the handle to the length of a 4" wrench so it fits in my seat bag. Since I swapped out for 8mm hex crank bolts, I probably don't need it anymore, but I end up working on other people's bikes almost as often as my own.
My Skeletool has found a more or less permanent home in my seat bag, though I should probably just buy a Squirt PS4 or something. I don't really need the multi-bit driver, because I've thrown in a Crank Bros. multi17 ever since I found a mysterious store credit on my account at my LBS.
Every summer, my bike-specific multitool becomes hands-down my second most used tool, right behind my pocket knife.
-
In all my years, I have never actually "needed" pliers to fix anything. I will admit that it's nice to have some gripping ability though. But I do carry this:
http://blogericious.blogspot.com/2007/06/altoids-tin-toolkit.html -
I carry a Topeak Hexus II since my chain broke miles away from anywhere and I had to walk, get towed and occasionally freewheel several miles to the end of the track: http://www.topeak.com/products/Mini-Tools/hexus2
My friend who has a bike shop reckons it has everything you need and nothing you don't. -
@neillcurrie said:
In all my years, I have never actually "needed" pliers to fix anything. I will admit that it's nice to have some gripping ability though. But I do carry this:
http://blogericious.blogspot.com/2007/06/altoids-tin-toolkit.htmlI've had to scab together last-ditch, middle-of-trail derailleur cable splices before, and I've been mighty glad I had those pliers to help get the cable seated and tensioned properly again. Well, as close to properly tensioned as possible when your splice is a zip tie.
-
In all my years, I have never actually "needed" pliers to fix anything. I will admit that it's nice to have some gripping ability though. But I do carry this:
http://blogericious.blogspot.com/2007/06/altoids-tin-toolkit.htmlI've had to scab together last-ditch, middle-of-trail derailleur cable splices before, and I've been mighty glad I had those pliers to help get the cable seated and tensioned properly again. Well, as close to properly tensioned as possible when your splice is a zip tie.
For extended touring I used to carry a spare brake and gear cable. No splicing needed then. I also used to carry 3 large zip ties in case the freewheel/freehub ever exploded: can tie the cogs to the spokes then and maybe still ride out without any backpedaling ;-)
Oh, and don't leave home without a fiberfix spoke. Even if never used as an actual replacement spoke, that kevlar cord itself is super strong. -
i carry crunch and a standart bit kit.yes it is heavy but i rely on it.
-
I use my MTB for leisure rides with my wife (she rides a classic woman's bike) and only during summer in our summer house, because my winter house is on a hill. Anyway, I have a pouch with dedicated tools like separate Allens etc. But now with you guys (bad company) I'm sure I'm going to get something. What about that Wenger or the new Victorinox? A Surge is going to be in my mono sling bag anyway, so I'm talking for something bike- specific.
-
Me and the wife ride alot in the summer. Alot of times in town and around bike paths setup around the city. When we go, we usually each carry a light weight backpack with towels, sun screen, etc. and recently I put my SAK Explorer plus into the bag, in case I need a knife but I dont have anything that has pliers so I might have to switch that out with a Swisschamp or put my Charge in my bag.
Another idea is that Mako Ti bike tool. :)
I havent had to use anything but I should add a small air pump and repair kit in case something happens and I am out 6-10 miles out of town. :D
I have been looking for some kind of locking saddle bag or some bike mounted bag that I could put a few tools in and maybe a few other things that I can lock and leave on the bike so I dont have to carry tools around with me in the backpack.
-
For years a Cooltool,then it broke :-\ I've had a few topeaks biketools,but thanks Farmman i've got another Cooltool, i like too carry a full size mt as well as always find old dumped bikes in the heath so I scavenge parts :D
-
@Zed said:
For years a Cooltool,then it broke :-\ I've had a few topeaks biketools,but thanks Farmman i've got another Cooltool, i like too carry a full size mt as well as always find old dumped bikes in the heath so I scavenge parts :DThere is a Cool Tool on eBay.
Y'all have me looking and comparing the other multitools that I had not known existed. Great feedback folks!

-
..i'm still keeping my Topeak multi tools which were bought in 2001 which serves many purposes.
It even have a chain breaker, and all the norm bike sized allen keys & sockets, bead spreader and patch....good for mtb and roadie. :D
Nice packed within under seat saddle bag..1 spare tubes. 1 pocket wrench high pressure air pump.
Come to think of it now, need to lok for it! :P -
I carry this in my rear jersey pocket.



It's a Crank Brothers b17 multi-tool
Sent from Endor via Schlapatok
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login