What Did You Use Your Multitool For Today?
-
Pry tool on Gerber Grappler as a back scratcher :D
-
went to open a bag of 'kitty-litter' and to my horror .... I didn't have a Knife on me to cut the string

does this mean I need to hand in my membership to MTO, or pay some kind of fine ?
-
I vote we send Kirky round to rub your face in the litter tray ;)
-
:ahhh

(we need a 'Kirky-smiley' !
) -
@Taxi Dad said:
:ahhh
(we need a 'Kirky-smiley' !
)As my workmates will tell you,a smiley-Kirky is an oxymoron
-
I used the pliers on my Vic Handyman to pick up hundreds of bits of broken glass from an old shower screen. My Swisstool would have been too heavy, cumbersome and tiring to use.
Handyman FTW :tool:

-
Why is your shower filled with rocks?
On a side note, I kinda like that pic.
-
:D :D McGyver's spirit lives on. I believe I can say that I tailored a solution conveying this message to her grace the wife efficiently today
:We had a new curtain made. So she was about to pull the strings on the curtain's upper part to make it fold when hung. She didn't notice that these were not tied so two of them got unlaced.
The trouble was that we didn't have a small sacking needle that it would take to get the strings back in place. Thus out came the Vic Handyman/Spirit S combo.
First, I straightened a paper clip, then cut it at a convenient lenght. Then I filed one tip so it became pointy. Afterwards, I fashioned an eye (a loop?) on this makeswift sacking needle, put the plactiquish string in and I pressed this end of the paperclip down with the Spirit's pliers to make it as even as I could. Next, I used the Handyman's metal file to round that end so it wouldn't tear much fabric apart, holding it with the Spirit's pliers for better grip.
I handed the needle to the wife and explained how she should use the needle's body to get the edge passed under it without causing much damage to the fabric. It worked just fine. :tool: Cheers
@thebullfrog said:
Why is your shower filled with rocks?On a side note, I kinda like that pic.
+1
-
Used my Pioneer and P-51 to show some of the kids at the store how an "old fashoned" can opener works today. :) Got the tint cans open with the bonus of play time.
-
[quote author=thebullfrog link=topic=12238.msg749117#msg749117 date=1373571289]
Why is your shower filled with rocks?On a side note, I kinda like that pic.
[/quoteWell spotted

Actually, that`s the gravel which passes for a garden outside my home. The release of energy from the brick had a greater horizontal component than my calculations (hmm, that looks about right) had indicated resulting in some scatter of glass.
-
@gardenvalley said:
[quote author=thebullfrog link=topic=12238.msg749117#msg749117 date=1373571289]
Why is your shower filled with rocks?On a side note, I kinda like that pic.
[/quoteWell spotted

Actually, that`s the gravel which passes for a garden outside my home. The release of energy from the brick had a greater horizontal component than my calculations (hmm, that looks about right) had indicated resulting in some scatter of glass.
Ah, I see, here I was just thinking you had some super-fancy zen garden shower.
-
@firiki said:
:D :D McGyver's spirit lives on. I believe I can say that I tailored a solution conveying this message to her grace the wife efficiently today
:We had a new curtain made. So she was about to pull the strings on the curtain's upper part to make it fold when hung. She didn't notice that these were not tied so two of them got unlaced.
The trouble was that we didn't have a small sacking needle that it would take to get the strings back in place. Thus out came the Vic Handyman/Spirit S combo.
First, I straightened a paper clip, then cut it at a convenient lenght. Then I filed one tip so it became pointy. Afterwards, I fashioned an eye (a loop?) on this makeswift sacking needle, put the plactiquish string in and I pressed this end of the paperclip down with the Spirit's pliers to make it as even as I could. Next, I used the Handyman's metal file to round that end so it wouldn't tear much fabric apart, holding it with the Spirit's pliers for better grip.
I handed the needle to the wife and explained how she should use the needle's body to get the edge passed under it without causing much damage to the fabric. It worked just fine. :tool: Cheers
Very MacGyver-ish of you firiki

On a far less exciting and MacGyver-ish note, I used the nailfile on the hook from my Yeochamp as, well a nailfile, and used the tip of the metal file as a nail cleaner. Thrilling, I know ::)
-
I used my Pioneer can opener as a Philips to assemble my new weed eater. :D
-
:D :D McGyver's spirit lives on. I believe I can say that I tailored a solution conveying this message to her grace the wife efficiently today
:We had a new curtain made. So she was about to pull the strings on the curtain's upper part to make it fold when hung. She didn't notice that these were not tied so two of them got unlaced.
The trouble was that we didn't have a small sacking needle that it would take to get the strings back in place. Thus out came the Vic Handyman/Spirit S combo.
First, I straightened a paper clip, then cut it at a convenient lenght. Then I filed one tip so it became pointy. Afterwards, I fashioned an eye (a loop?) on this makeswift sacking needle, put the plactiquish string in and I pressed this end of the paperclip down with the Spirit's pliers to make it as even as I could. Next, I used the Handyman's metal file to round that end so it wouldn't tear much fabric apart, holding it with the Spirit's pliers for better grip.
I handed the needle to the wife and explained how she should use the needle's body to get the edge passed under it without causing much damage to the fabric. It worked just fine. :tool: Cheers
Very MacGyver-ish of you firiki

On a far less exciting and MacGyver-ish note, I used the nailfile on the hook from my Yeochamp as, well a nailfile, and used the tip of the metal file as a nail cleaner. Thrilling, I know ::)
Thanks Monrogue. Wife didn't want to fuel my MT/SAK craze much but she couldn't help exclaiming this worked well. As for thrilling, for me it is, I can't stand doing that to my nails :ahhh :D

-
[quote author=thebullfrog link=topic=12238.msg749117#msg749117 date=1373571289]
Why is your shower filled with rocks?On a side note, I kinda like that pic.
[/quoteWell spotted

Actually, that`s the gravel which passes for a garden outside my home. The release of energy from the brick had a greater horizontal component than my calculations (hmm, that looks about right) had indicated resulting in some scatter of glass.
Ah, I see, here I was just thinking you had some super-fancy zen garden shower.
I was picturing a zen like bath too. Interesting photo nevertheless. Welcome to the forums
PS: Why can't we write outside the quote field? -
:D :D McGyver's spirit lives on. I believe I can say that I tailored a solution conveying this message to her grace the wife efficiently today
:We had a new curtain made. So she was about to pull the strings on the curtain's upper part to make it fold when hung. She didn't notice that these were not tied so two of them got unlaced.
The trouble was that we didn't have a small sacking needle that it would take to get the strings back in place. Thus out came the Vic Handyman/Spirit S combo.
First, I straightened a paper clip, then cut it at a convenient lenght. Then I filed one tip so it became pointy. Afterwards, I fashioned an eye (a loop?) on this makeswift sacking needle, put the plactiquish string in and I pressed this end of the paperclip down with the Spirit's pliers to make it as even as I could. Next, I used the Handyman's metal file to round that end so it wouldn't tear much fabric apart, holding it with the Spirit's pliers for better grip.
I handed the needle to the wife and explained how she should use the needle's body to get the edge passed under it without causing much damage to the fabric. It worked just fine. :tool: Cheers
Very MacGyver-ish of you firiki

On a far less exciting and MacGyver-ish note, I used the nailfile on the hook from my Yeochamp as, well a nailfile, and used the tip of the metal file as a nail cleaner. Thrilling, I know ::)
Thanks Monrogue. Wife didn't want to fuel my MT/SAK craze much but she couldn't help exclaiming this worked well. As for thrilling, for me it is, I can't stand doing that to my nails :ahhh :D

I know what you mean. I don't think most of our wives want to encourage us, but they don't hesitate to ask for our help or our MTs/SAKs when they need something ;)
I prefer to try to keep my nails maintained a bit due to my office setting, but they tend to get dirty/rough fairly often as I do more "dirty" work (if there is such a thing at a bank). Sometimes I need a quick filing or cleaning, and sometimes I just do it cuz I'm bored and it gives me an excuse to pull out my Yeochamp and play with it for a few minutes. We all know how that is ;)
-
As it was hanging from my neck on a lanyard, my tinker deluxe acted like a pendelum and reminded me to squat and not bend while pulling weeds.
-
Used my MP400 and Pioneer to tear down and rebuild a power washer gun today at work.

-
Used my MUT to remove the isolation and cutting a coax cable to lenght while me and my dad tried to install a new antenna on my grandmas house, struggling to get signals and everything to work until realizing that her TV doesn't support the new signals.

Lesson learned, read the TV manual before doing too much next time!Oh well, got to play a bit with the MUT, and grandma's getting a new TV. :D
Would of taken pictures, but was a bit preoccupied trying to balance on the edge of the roof whilst screwing and cutting.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login