Leather strop
-
Hi - Decided I want to learn to use a leather strop for final blade edge finish. From what I gather, this works well.
First mistake I made is ordering a barbers strop rather that one already mounted to a paddle. The strop arrived and I can see mounted on a paddle makes sense.
The two halves of the strop are not stuck together so my plan is to acquire/make a paddle and mount the barber strop into that.
Long winded question I know, but what would work to attach the leather to the wooden paddle? I'm concerned that something like super glue or gorilla glue may soak through. Or no?
Not much experience with leather, so that's why I'm asking you guys. And I don't need to hear any stories about experiences with leather. I didn't say leather gear. Ha.

Thanks!
Joe
-
I just step on a belt.
-
Here's what "this to that" has to say. :D
-
Ah....thanks for the link. I'd never heard of that site before.
I will see what I can find. Don't think out here where I live I'll have any luck with the Barges, but should be able to find that contact cement.
Good deal.
Thanks again!
Joe
-
Chris (I think) said just use thumb tacks/ drawing pins
I use contact adhesive, I call it evostick here in the UK
Interesting site Enki

-
None of the brands is available here. :) I just use it to check what type of glue is best and find something similar locally.
-
Sorry, but a leather strop for a blade (even for normal kitchen knifes) is absolutely exaggerated.
A normal sharp edge you'll get with a 2000grit bench stone. And even this is sometimes way too much (or fragile) for heavy duty work. A leather strop you normally use for razors where a 8000/16000 benchstone (and for some sad fools 32000 benchstone) was used to create an edge.
Using a leather strop for finish of a SAK is like using a nail file for finishing wood art made with a chain saw.
-

I think we just need to ask Eric if he uses one, as his SAK in the Snapper thread is SHARP.
I got one to use with my Barkies to keep them tuned up. I think if they are used for SAK tuning it may not be over kill could reduce times to the sharpener. Of course some newspaper or a couple envelopes can also be used for this.
-
Metropolicity is Eric. ;) I'm Nikola. :D
And yes, I do use a strop.
It greatly reduces the need for sharpening and prolongs the life of a blade as each sharpening takes away material from the blade. You'd be amazed what a little stropping can do to the blade edge.
And no, I never go past 2000 grit. Mostly stay well below it. ;) HankSolon, you're really missing out and should at least try it before you pass judgement. -
@enki_ck said:
Metropolicity is Eric. ;) I'm Nikola. :DAnd yes, I do use a strop.
It greatly reduces the need for sharpening and prolongs the life of a blade as each sharpening takes away material from the blade. You'd be amazed what a little stropping can do to the blade edge.
And no, I never go past 2000 grit. Mostly stay well below it. ;) HankSolon, you're really missing out and should at least try it before you pass judgement.:)
I just used carpet double sided tape. Very strong.
-
@enki_ck said:
Metropolicity is Eric. ;) I'm Nikola. :DAnd yes, I do use a strop.
It greatly reduces the need for sharpening and prolongs the life of a blade as each sharpening takes away material from the blade. You'd be amazed what a little stropping can do to the blade edge.
And no, I never go past 2000 grit. Mostly stay well below it. ;) HankSolon, you're really missing out and should at least try it before you pass judgement.Oops... Sorry, I knew that... I'm home sick that's my poor excuse. You were nice not to give me a
or two.Well at least we know now.. strop it is. I often strop my saks on paper to keep them touched up, but I have never used the real one on the saks. I think I'll give it a try. Thanks for responding.
-
@enki_ck said:
HankSolon, you're really missing out and should at least try it before you pass judgement.I tried it. I have several bench stones (wet and dry... Nature and artificial) from 280 till 16000 grit as well as 2 leather stropes and an old Zeiss microscope used with an external lamp. I sharp and use razors. I examined sharpening results of many bench stones and different steels under my microscope.
I think after several razors, knives and SAKs which I got from dull to hair splitting you can consider me as one who may pass judgement. But I'm not an expert, just experienced. ;)
Again: Leather strope for a SAK is nonsense "to me". Since for "heavy duty" work you'll need a bench stonen, after it. Carefully used bench stones with highest possible grits as a starting point, the reduce of material is very less.
A leather strope won't fix the splits and cracks. The edge of a SAK isn't so thin like a razor or maybe carbon steel kitchen knife. Even on my kitchen knifes I only go to 2000 grit bench stone. I could do more (like 8000 or 16000) but in my experience one use of the knife destroys the fragile edge too much for the effort, you spent before.
But if you like using a strope and feel happy with it, do it. :) That I don't like it shouldn't matter to everyone. I just have some points against a strope for a SAK.
-
HankSolon, you're really missing out and should at least try it before you pass judgement.
I tried it. I have several bench stones (wet and dry... Nature and artificial) from 280 till 16000 grit as well as 2 leather stropes and an old Zeiss microscope used with an external lamp. I sharp and use razors. I examined sharpening results of many bench stones and different steels under my microscope.
I think after several razors, knives and SAKs which I got from dull to hair splitting you can consider me as one who may pass judgement. But I'm not an expert, just experienced. ;)
Again: Leather strope for a SAK is nonsense "to me". Since for "heavy duty" work you'll need a bench stonen, after it. Carefully used bench stones with highest possible grits as a starting point, the reduce of material is very less.
A leather strope won't fix the splits and cracks. The edge of a SAK isn't so thin like a razor or maybe carbon steel kitchen knife. Even on my kitchen knifes I only go to 2000 grit bench stone. I could do more (like 8000 or 16000) but in my experience one use of the knife destroys the fragile edge too much for the effort, you spent before.
But if you like using a strope and feel happy with it, do it. :) That I don't like it shouldn't matter to everyone. I just have some points against a strope for a SAK.
I never said I was an expert of any sort. It seems if anyone is an expert here, it's you. And I don't use a SAK for "heavy duty" work and for most stuff the strop will do. A lot of people use strops on other blades, not only razors, and it works for them. I never said that the strop fixes splits and cracks. No one except you mentioned using high grit stones or even asked about it so why even go there?
I'll leave it at that and please let's get back to the topic here.

-
I have never used a leather strop for knife sharpening. For my leather swivel knives (both metal and ceramic)...yes I use one often.
I just use the backside of a leather belt and some jewelers rouge (ferric oxide). Does the job nicely.
-
Joe
You might find some of my 'strop adventures' are useful for when you make yours :D
</post/385782>

-
I use a old leather belt to knock off the burr after sharping.
sent from Ducttapetech's mobile device
-
The palm of my hand seems to work as well as anything. If you mess up you have to wait for your strop to heal.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login