Wave Owners Club
-
MARVELOUS...had to pick my jaw on the floor
-
I wouldn't mind having that chrome Wave with the crazy screw pattern.
-
@ThadMiller said:
Thanks!
@Monrogue
I use this:

When i'm less stressed the next days, i show you my polished Micra, Pulse and Rebar... 8)
Oh I see. Oh I can't wait

-
@ThadMiller said:
Thanks!
@Monrogue
I use this:

When i'm less stressed the next days, i show you my polished Micra, Pulse and Rebar... 8)
what are the "grit" on those?
-
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.
Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
-
@Luna Knife said:
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
Well, first of all, opinions on that differ.. But some things the old Wave has over the new one are:
-
The screwdrivers are considered better by some: A full 3D phillips, instead of the 'half 3D' phillips of the bits. Also they have more reach
-
The scissors are found better by most
-
It's actually sleeker and lighter than the new one.
Of course, opinions differ, like I said already, I personally like the bit drivers better, plus the inside tools -do- lock, as opposed to the old one. I only have had a new Wave, so I don't know which one I prefer, but I certainly like the fact that everything locks, and I prefer the look of the new blades, too.
Also something not to forget, people may like the old one better for its collectability, as it's a discontinued tool.
Hope this helped

-
-
@Luna Knife said:
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.
Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
Well, first of all, opinions on that differ.. But some things the old Wave has over the new one are:
-
The screwdrivers are considered better by some: A full 3D phillips, instead of the 'half 3D' phillips of the bits. Also they have more reach
-
The scissors are found better by most
-
It's actually sleeker and lighter than the new one.
Of course, opinions differ, like I said already, I personally like the bit drivers better, plus the inside tools -do- lock, as opposed to the old one. I only have had a new Wave, so I don't know which one I prefer, but I certainly like the fact that everything locks, and I prefer the look of the new blades, too.
Also something not to forget, people may like the old one better for its collectability, as it's a discontinued tool.
Hope this helped

Good points bmot
You pretty much explained why I want one. I'm not a big fan of the bit drivers myself. My main issue with the Original Wave is the non-locking inside tools, but I can deal with that for a sleeker, lighter version of an excellent MT. I too have the new Wave, and haven't actually handled the original version, but I can tell that I would like it, and I like the dedicated drivers better, although it does seem to go a little overboard on the flatheads ;) -
-
@Luna Knife said:
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.
Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
Well, first of all, opinions on that differ.. But some things the old Wave has over the new one are:
-
The screwdrivers are considered better by some: A full 3D phillips, instead of the 'half 3D' phillips of the bits. Also they have more reach
-
The scissors are found better by most
-
It's actually sleeker and lighter than the new one.
Of course, opinions differ, like I said already, I personally like the bit drivers better, plus the inside tools -do- lock, as opposed to the old one. I only have had a new Wave, so I don't know which one I prefer, but I certainly like the fact that everything locks, and I prefer the look of the new blades, too.
Also something not to forget, people may like the old one better for its collectability, as it's a discontinued tool.
Hope this helped

Good points bmot
You pretty much explained why I want one. I'm not a big fan of the bit drivers myself. My main issue with the Original Wave is the non-locking inside tools, but I can deal with that for a sleeker, lighter version of an excellent MT. I too have the new Wave, and haven't actually handled the original version, but I can tell that I would like it, and I like the dedicated drivers better, although it does seem to go a little overboard on the flatheads ;)I guess it depends on the individual. Because there is nothing worse then a MT folding and taking a nice divot out of your finger while you are working. For light work non locking is fine, but any real pressure I want locks. My 2 cents
-
-
@Luna Knife said:
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.
Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
Well, first of all, opinions on that differ.. But some things the old Wave has over the new one are:
-
The screwdrivers are considered better by some: A full 3D phillips, instead of the 'half 3D' phillips of the bits. Also they have more reach
-
The scissors are found better by most
-
It's actually sleeker and lighter than the new one.
Of course, opinions differ, like I said already, I personally like the bit drivers better, plus the inside tools -do- lock, as opposed to the old one. I only have had a new Wave, so I don't know which one I prefer, but I certainly like the fact that everything locks, and I prefer the look of the new blades, too.
Also something not to forget, people may like the old one better for its collectability, as it's a discontinued tool.
Hope this helped

Good points bmot
You pretty much explained why I want one. I'm not a big fan of the bit drivers myself. My main issue with the Original Wave is the non-locking inside tools, but I can deal with that for a sleeker, lighter version of an excellent MT. I too have the new Wave, and haven't actually handled the original version, but I can tell that I would like it, and I like the dedicated drivers better, although it does seem to go a little overboard on the flatheads ;)I guess it depends on the individual. Because there is nothing worse then a MT folding and taking a nice divot out of your finger while you are working. For light work non locking is fine, but any real pressure I want locks. My 2 cents
Oh I agree with you on this. I want and prefer locking tools, but I make the exception for the PST, PSTII, Juice KF4 and hopefully someday the Original Wave due to my enjoyment of them. At least the O-Wave has locking blades on the outside. My MTs/SAKs probably get more fiddling time than actual hard use. I don't do lots of serious, hard work with my MTs anyway as that type of thing doesn't come up in my line of work much. So as a result, I don't need locking tools the same way someone who does more handyman/trade work and whatnot would. So as you said, depends on the person ;)
-
-
[quote author=Luna Knife link=topic=21437.msg752148#msg752148 date=1374192617]
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
Well, first of all, opinions on that differ.. But some things the old Wave has over the new one are:
-
The screwdrivers are considered better by some: A full 3D phillips, instead of the 'half 3D' phillips of the bits. Also they have more reach
-
The scissors are found better by most
-
It's actually sleeker and lighter than the new one.
Of course, opinions differ, like I said already, I personally like the bit drivers better, plus the inside tools -do- lock, as opposed to the old one. I only have had a new Wave, so I don't know which one I prefer, but I certainly like the fact that everything locks, and I prefer the look of the new blades, too.
Also something not to forget, people may like the old one better for its collectability, as it's a discontinued tool.
Hope this helped

Good points bmot
You pretty much explained why I want one. I'm not a big fan of the bit drivers myself. My main issue with the Original Wave is the non-locking inside tools, but I can deal with that for a sleeker, lighter version of an excellent MT. I too have the new Wave, and haven't actually handled the original version, but I can tell that I would like it, and I like the dedicated drivers better, although it does seem to go a little overboard on the flatheads ;)I guess it depends on the individual. Because there is nothing worse then a MT folding and taking a nice divot out of your finger while you are working. For light work non locking is fine, but any real pressure I want locks. My 2 cents
Oh I agree with you on this. I want and prefer locking tools, but I make the exception for the PST, PSTII, Juice KF4 and hopefully someday the Original Wave due to my enjoyment of them. At least the O-Wave has locking blades on the outside. My MTs/SAKs probably get more fiddling time than actual hard use. I don't do lots of serious, hard work with my MTs anyway as that type of thing doesn't come up in my line of work much. So as a result, I don't need locking tools the same way someone who does more handyman/trade work and whatnot would. So as you said, depends on the person ;)
[/quote]Thanks for the info people. Sincerely
I think if I had a bit driver on my wave I would lose the bits like my SAK toothpicks. I dont think I will be able to find an original Wave locally and the prices online seem too high compared to a new one. Maybe I could snipe one on ebay at 2am
-
-
@Luna Knife said:
[quote author=bmot link=topic=21437.msg752304#msg752304 date=1374243600]
[quote author=Luna Knife link=topic=21437.msg752148#msg752148 date=1374192617]
I am considering membership to the Wave club. I own a beater Leatherman PST, a mint PST and a Juice CS 4.Why is the original issue Wave considered superior to the "new" model? Is there a particular year of the pre 2004 Wave that is the most sought after?
Thanks
Well, first of all, opinions on that differ.. But some things the old Wave has over the new one are:
-
The screwdrivers are considered better by some: A full 3D phillips, instead of the 'half 3D' phillips of the bits. Also they have more reach
-
The scissors are found better by most
-
It's actually sleeker and lighter than the new one.
Of course, opinions differ, like I said already, I personally like the bit drivers better, plus the inside tools -do- lock, as opposed to the old one. I only have had a new Wave, so I don't know which one I prefer, but I certainly like the fact that everything locks, and I prefer the look of the new blades, too.
Also something not to forget, people may like the old one better for its collectability, as it's a discontinued tool.
Hope this helped

Good points bmot
You pretty much explained why I want one. I'm not a big fan of the bit drivers myself. My main issue with the Original Wave is the non-locking inside tools, but I can deal with that for a sleeker, lighter version of an excellent MT. I too have the new Wave, and haven't actually handled the original version, but I can tell that I would like it, and I like the dedicated drivers better, although it does seem to go a little overboard on the flatheads ;)I guess it depends on the individual. Because there is nothing worse then a MT folding and taking a nice divot out of your finger while you are working. For light work non locking is fine, but any real pressure I want locks. My 2 cents
Oh I agree with you on this. I want and prefer locking tools, but I make the exception for the PST, PSTII, Juice KF4 and hopefully someday the Original Wave due to my enjoyment of them. At least the O-Wave has locking blades on the outside. My MTs/SAKs probably get more fiddling time than actual hard use. I don't do lots of serious, hard work with my MTs anyway as that type of thing doesn't come up in my line of work much. So as a result, I don't need locking tools the same way someone who does more handyman/trade work and whatnot would. So as you said, depends on the person ;)
[/quote]Thanks for the info people. Sincerely
I think if I had a bit driver on my wave I would lose the bits like my SAK toothpicks. I dont think I will be able to find an original Wave locally and the prices online seem too high compared to a new one. Maybe I could snipe one on ebay at 2am
[/quote]One of the reasons I'm not a huge bit driver fan is because I don't sheath carry, and I don't have an available place to carry the extra bit set (which I have, but never use). If I really wanted to, I could just use one of the bit carriers and fill it with whatever bits I think would be most useful to me. The carriers don't take up much space, but I just don't think I could fit one into my EDC setup. Also, I don't really encounter any situations where I need anything other than a Phillips or flathead, most of which are covered by the MT/SAK combo I already have on me. That doesn't mean I never would need them, but I think it would be too rare to bother with carrying them. Although, I don't know if you would have to worry about losing them as they seem secure in the driver to me, as well as in the bit carrying cards.
I check Ebay occasionally just to see what Original Waves they have available, but I won't have enough money saved up for one for probably several months (I have a savings account with a few bucks going into it out of each paycheck to save towards the remaining MTs/SAKs I want). I would like a brand new one, but those are expensive, so I would settle for a used/barely used one in very good condition, which I do occasionally see.
Hope my ramblings helped ;)
-
-
I just bought a Wave a week ago. What a great investment.

-
@campussecurity said:
I just bought a Wave a week ago. What a great investment.
Enjoy

-
A little overdue for my addition to the club. Here are the old and new Waves.


-
Added a brand new Wave to my collection on Friday! Date code 0213 and 0313.

CB
-
The wave was my first multitool and it is a pretty darn good one ! It has everything I wish for but... I personaly find it way to big for EDC. I prefer the juice C2...
How do you guys wear your wave so it is "wearable" ?
Sent from my iPhone using Tapatalk 2
-
@Mimifred said:
The wave was my first multitool and it is a pretty darn good one ! It has everything I wish for but... I personaly find it way to big for EDC. I prefer the juice C2...How do you guys wear your wave so it is "wearable" ?
Sent from my iPhone using Tapatalk 2
I carry my full size multitools in my right back pocket next to my wallet. Works great for the most part.
-
@Mimifred said:
The wave was my first multitool and it is a pretty darn good one ! It has everything I wish for but... I personaly find it way to big for EDC. I prefer the juice C2...How do you guys wear your wave so it is "wearable" ?
Sent from my iPhone using Tapatalk 2
Ive been using the leathermna grey nylon sheath lately for the waves. I like it better that other LM nylon sheaths. I also use the dedicated old style wave sheath
-
@Mimifred said:
The wave was my first multitool and it is a pretty darn good one ! It has everything I wish for but... I personaly find it way to big for EDC. I prefer the juice C2...How do you guys wear your wave so it is "wearable" ?
Sent from my iPhone using Tapatalk 2
I wear my wave in the sheath it came with. I hardly notice it there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login