Show Us Your EDC gear!!!
-
Me too. That is sweet.
sent from Ducttapetech's mobile device
-
The brass capsule with thimble is from an old sewing kit I bought on ebay from Canada (i think it was made in Austria). It was painted orange but some acetone soon took care of that. Then I took a piece of blue jeans fabric and sewn it tightly around the bottom part of the capsule. I drenched the piece of fabric with super glue and left it to harden. After some sanding I added second layer of fabric, and repeated super glue soaking and sanding part. Ring around thimble was made in similar manner. I did this to reinforce the capsule.
Metal tube for needles is from the original kit.
I made needle threader from wire I got from another needle threader, and from pieces of brass tubes. It can be covered with a cap, to protect the wire from bending when all components are crammed into the capsule.
To miniaturize the seam ripper I pulled the blade from the original handle, and made a smaller one from cotton thread and super glue. The sheath of the blade is made from heat-shrink tubing to protect other components of the kit.
-
Mine today,plus the remains of my sunglasses after a crash mtb'ing this morning :-\

-
Zed, one tiny criticism...Your pictures are always massive and difficult to view on my laptop, also when I do view it the quality of the picture is well...crappy :P
You might want to change the resolution of your camera ;)Mine today...nice & simple ;)
NiteCore EX10, SOG Pocket PowerPlier in a Leatherman PST sheath...I don't like the nylon one it came with.

-
Lister, I must say that sewing kit is awesome!
makes me want one! JR -
Pics Sharp on my tablet

-
Thanks for the info. lister.

Puno fala.

-
@Dr Gonzo said:
Mine today...nice & simple ;)NiteCore EX10, SOG Pocket PowerPlier in a Leatherman PST sheath.
How's the PPP? I have been considering picking one up for awhile now.
Also, how did you remove the anodizing on the NiteCore? It looks great!
It's a nice little multi, I'm thinking of swapping the blade for a belt cutter just to be sure it's UK friendly...I think being able to swap the tool layout is one of the best things about SOG multi's.
The NiteCore was a little pocket worn I just took it further with some sand paper ;) -
Mine today,plus the remains of my sunglasses after a crash mtb'ing this morning :-\
I hope you came out of it ok.
cheers mate
the shades took the worst of it ,I've a few battle scars :D -
Crashes on bikes always suck!¡! Glad you made it out ok Paul

-
@stealth007s said:
Crashes on bikes always suck!¡! Glad you made it out ok Paul
Cheers terry
I've had a few crashes over the years as still think I'm 12 :D -
-
Nice setup.
sent from Ducttapetech's mobile device
-
You big tease. :D You know I'll have to ask. ;) What's in the pouch and who made it.

-
Is it a Dairylea Triangle holder? :D
-
@enki_ck said:
You big tease. :D You know I'll have to ask. ;) What's in the pouch and who made it.
It's a coin pouch, it holds about 10 £1 coins ;)
Made by a maker over on British Blades, Ian Atkinson.
He has a web site and makes some great leather goods
http://www.ianatkinson.net/leather/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

