The 30 Day Victorinox Huntsman Challenge!
-
Always fun following your challenges. This one should be interesting.

Sent from my SCH-S738C using Tapatalk 4 Beta
-
Love these !!
-
Yes! Another 30 day challenge!

I'm very curious of how Vicky will handle 30days of abuse compared to the cheapos.

-
I had better just admit now that this is the first challenge in which a single failed implement will break my black, shrivelled heart.
-
I'm so excited about this, I think I peed myself a little! :ahhh
Ummm... maybe that was too much sharing.
My only fear is that this test, with a good tool, won't render the hilarious results (and write up) of past tool tests.
I predict better test results for the saw. :D
I have to say, I REALLY am curious how well Vicky will hold up to hard use.
-
This is a cool thing you're doing here
I am very interested to see how a SAK holds up to real usage. Can't wait to see/read all about it :D -
@Lynn LeFey said:
I'm so excited about this, I think I peed myself a little! :ahhhUmmm... maybe that was too much sharing.
My only fear is that this test, with a good tool, won't render the hilarious results (and write up) of past tool tests.
I predict better test results for the saw. :D
I have to say, I REALLY am curious how well Vicky will hold up to hard use.
TMI!!!!!!!!!

It should hold up good. I running my CT41 threw the mill for years and it keep going for more. This should be a walk in the park for a Huntsman. Still cant wait to see what he throws at it.
-
As much as I love the Huntsman, I am looking forward to seeing one used and abused. Where's the popcorn?
-
Day 1 was a whole lot of work for Vicky. It cut an apple, and opened a package of mints.
Oh, right, and took over when the cordless skill saw just wasn't fine enough.

Sometimes, when you only have to take a small amount of wood out, the knife's the thing.Then I did something really dumb. There was an edge that needed some very slight shaving to fit, which is odd, because plywood forming usually isn't this precise. There really is a proper tool for planing—a planer comes to mind—or, if you're in a hurry, a skill saw, as long as your motto is "Safety Third". I had the time, so I went with something less dangerous but more...odd.

Me: "Hey, I don't have a planer."
Vicky: "Ha!"Interestingly, after all that, the blade is still push-cut sharp. No fooling. In fact, I used it to open this bag of rigid insulation, which we needed to patch in around the building where the previous insulation was damaged.

Open sassafras? No, no...open Sacramento? No. Argh, what is that word again?In fact, when it came time to patch in the insulation, there were some sections in the old insulation that needed trimming. The sawzall handled most of them, but there were two spots that called for something smaller.

My Coghlan's Army Knife's saw would have cried at this point.Do me a favour, and imagine a clever segue here: what about the bottle opener/screwdriver? As some forumites may know, I am very hard on any given pocket tool's prybar/screwdriver/can opener/hoo haw. I should probably carry a dedicated mini-bar with me, but I've found that even a $6 knock-off's bottle opener/screwdriver works just fine. Therefore:
Digging tool!

Bad news! I didn't find any buried treasure in there. Not even lousy, third-rate treasure.Also: prying tool! The nail-its were pretty stubborn on this form. I just needed to get it started so I could get some hammer claws in there, because there's prying and then there's prying.

I just wedged it in there, and wiggled and turned until there was enough room for the hammer claws. Err, wiggled and turned the Huntsman, that is.I admit, Day 1 was a bit harsh, but so far the tools are all still basically pristine. I'm surprised I don't have to sharpen the knife yet, but it's still factory sharp. Weird.
-
Oh man...

This is awesome.
I predict... and maybe I'm going out on a limb here, but I think you'll like Vicky better than the SAK knock-off.

-
Wow, that's a busy, hard working first day. I could only dream of having to use any of my MTs/SAKs this much in even a week. I think I'm going to enjoy this. It's very interesting
29 more days to go, and it looks like Vicky is off to a good start 
-
I love the concept of this thread and can't wait to see what it becomes. The Huntsman was a great knife to pick to do a 30 day trial on.

-
@captain spaulding said:
I love the concept of this thread and can't wait to see what it becomes. The Huntsman was a great knife to pick to do a 30 day trial on.
There are two reasons I chose the Huntsman. The first is that it's a very popular knife that includes all of my most-used tools. The second is that when I picked up my new Huntsman, I also picked up the display model at a steep discount.
@Lynn LeFey said:
I predict... and maybe I'm going out on a limb here, but I think you'll like Vicky better than the SAK knock-off.
But Coghlan tried so hard! Seriously, though, I can already tell you I'm going to spend less of my time worrying about tool failure in some emergency situation. Good tools don't solve problems, but they sure help me solve them quicker. I like quicker.
-
Go Vicky !
Go Vicky !
Go ! Go ! Go ! -
What he said. ↑

-
Another great thread Jothra
The only thing that's confusing me at the minute is where the word challenge applies :D I'm pretty certain Vicky will be fantastic! -
At first, Day 2 looked pretty bad—it was Mud City on-site, and I was worried I might end up getting disgusting for an hour, then running out of work and getting sent home. In fact, it was so muddy that I wanted to tie my boots extra tight so I wouldn't lose one on the way across site to the tool trailer. So thumbs up for the hook! Recently I've been carrying a Wenger, and while I enjoyed that knife I didn't realize how much I missed the hook.

Also good for skates, climbing shoes, and anything else you want very tight!To help deal with excess water in the building, we brought a garden pump...but it didn't work. The good news is they're easy to take apart. The bad news is the pump wasn't just plugged, but actually broken broken. Of course, we had to take it apart to find out!

Phillips screws? Ha! I laugh in your general direction!Somewhere in there I picked up a sliver. It was one of those tiny ones that hurts an awful lot, but not enough to keep co-workers from making Waaaaambulance jokes. The tweezers tweezed.
The bigger stuff came in the afternoon, when I had to pick up a pallet of poly sheeting for under a concrete floor. This is 10mm sheeting, which is ridiculous, expensive, and moronically heavy. Vicky couldn't do the lifting, but it could do the cutting so I could lift the rolls myself.

The blade handled all the scary, beefcakey banding holding the rolls to the pallet.
It also handled the tangled mass of cellophane wrap.
Meanwhile (or, rather, after), the scissors cut through the last of the (plentiful) white banding that held the rolls to each other.Finally, with the monumental task of detaching these things done, and with the rolls lifted to their various temporary homes, I had to break down the pallet so it could fit in the garbage bin. This doesn't involve sawing the entire thing up; instead, I just saw about halfway through the main supporting 2x4s, and kick the whole thing in half. This is easier than it sounds, and usually only takes a minute or so.

I find this easier than cutting plywood. For real!Now Vicky is helping slice some Swiss cheese. Hopefully you don't need pictures to know what Swiss cheese looks like.
There we have Day 2!
-
Dang right out of the gate, Vicky is doing well.
-
Go Vicky!

-
Ha! Any LM would have fallen apart by now :ahhh :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login