What did you use your Sak on today?
-
@Monrogue said:
I just used my Yeochamp to slice some tomato to go on my tuna sandwich for lunch at work tomorrow.Sent from my XT901 using Tapatalk 2
So, which kind of sandwiches will you take with you the other days of the week ? Now don't tell me you're just picking them at random
.P.S. I must say, that sandwich does look very tasty, do you ship overseas ?
-
I just used my Yeochamp to slice some tomato to go on my tuna sandwich for lunch at work tomorrow.
Sent from my XT901 using Tapatalk 2
So, which kind of sandwiches will you take with you the other days of the week ? Now don't tell me you're just picking them at random
.P.S. I must say, that sandwich does look very tasty, do you ship overseas ?
I should have known you'd call me out on this too ;) We try to plan lunches for the week, but that's actually harder for me than the MT/SAK schedule. It's hard to try to come up with a variety of options, as I prefer to try to keep it simple (and cheap) so that there's minimum prep here at work. Sandwiches I can make the night before, so that's good, but then I have to take the time to make them, and sometimes I'm not in the mood to mess with it ::) We have a full kitchen in each of our buildings (wife works here too, but in a separate building), so we can bring in frozen or leftover food to microwave. There's even an oven if we were to need it. Trying to find a variety of sandwich options is one of the biggest issues, especially when trying to keep it cheap. That limits it to tuna, bologna or vienna sausages pretty much. I can't believe you just got me going on a lunch food schedule rambling session :POh I could ship one overseas to you, and all I'd ask in return is just a Spirit RT

-
I just used my Yeochamp to slice some tomato to go on my tuna sandwich for lunch at work tomorrow.
Sent from my XT901 using Tapatalk 2
So, which kind of sandwiches will you take with you the other days of the week ? Now don't tell me you're just picking them at random
.P.S. I must say, that sandwich does look very tasty, do you ship overseas ?
I should have known you'd call me out on this too ;) We try to plan lunches for the week, but that's actually harder for me than the MT/SAK schedule. It's hard to try to come up with a variety of options, as I prefer to try to keep it simple (and cheap) so that there's minimum prep here at work. Sandwiches I can make the night before, so that's good, but then I have to take the time to make them, and sometimes I'm not in the mood to mess with it ::) We have a full kitchen in each of our buildings (wife works here too, but in a separate building), so we can bring in frozen or leftover food to microwave. There's even an oven if we were to need it. Trying to find a variety of sandwich options is one of the biggest issues, especially when trying to keep it cheap. That limits it to tuna, bologna or vienna sausages pretty much. I can't believe you just got me going on a lunch food schedule rambling session :POh I could ship one overseas to you, and all I'd ask in return is just a Spirit RT


I just knew you wouldn't just make a sandwich without some planning, I'm starting to know you my friend ;).
And by the way, the sandwich that makes me give up my Spirit RT is not yet invented, and even if I was really hungry, I would still try to eat the Spirit RT's sheath before I would give up the tool itself :D.
Edit: Was this really my 1000th post, talking about sandwiches ...

-
@Top-Gear-24 said:
Edit: Was this really my 1000th post, talking about sandwiches ...
One of us! One of us! :D
-
I just used my Yeochamp to slice some tomato to go on my tuna sandwich for lunch at work tomorrow.
Sent from my XT901 using Tapatalk 2
So, which kind of sandwiches will you take with you the other days of the week ? Now don't tell me you're just picking them at random
.P.S. I must say, that sandwich does look very tasty, do you ship overseas ?
I should have known you'd call me out on this too ;) We try to plan lunches for the week, but that's actually harder for me than the MT/SAK schedule. It's hard to try to come up with a variety of options, as I prefer to try to keep it simple (and cheap) so that there's minimum prep here at work. Sandwiches I can make the night before, so that's good, but then I have to take the time to make them, and sometimes I'm not in the mood to mess with it ::) We have a full kitchen in each of our buildings (wife works here too, but in a separate building), so we can bring in frozen or leftover food to microwave. There's even an oven if we were to need it. Trying to find a variety of sandwich options is one of the biggest issues, especially when trying to keep it cheap. That limits it to tuna, bologna or vienna sausages pretty much. I can't believe you just got me going on a lunch food schedule rambling session :POh I could ship one overseas to you, and all I'd ask in return is just a Spirit RT


I just knew you wouldn't just make a sandwich without some planning, I'm starting to know you my friend ;).
And by the way, the sandwich that makes me give up my Spirit RT is not yet invented, and even if I was really hungry, I would still try to eat the Spirit RT's sheath before I would give up the tool itself :D.
Edit: Was this really my 1000th post, talking about sandwiches ...

Yes, I think you got me figured out ;) Haha, I hear you on that one. The sheath might not be too bad really, especially if you were starving

Woooo! Welcome to the No Life Club buddy
I'm glad my sandwich is what gave you the 1000th post

-
I used my GAK to take off a bottle cap and open a package.
Yesterday I used my Climber for some light duty carving to creating a dowel end in the correct size.
A couple of days I wanted to use my Classic to cut off one of those plastic pieces that is used to bunch up computer cables. The small scissors is just the right size for doing this. Of course, my employer forbids me from carrying a knife or using any tool that they do not provide.
Yes I am lame.

-
Used my Spirit RT to change my shower/bathtub faucet valve. I used to need a Phillips screwdriver, a pair of pliers, and a pair of needle-nose pliers to do the job. I was surprised that the Spirit handled the job so well.
-
Just used the awl to remove the shrink wrap plastic from a couple of new notebooks (the paper kind).
-
Pioneer can opener on a tin of tuna to make a tuna mayo sandwich

-
Recruit,to peel and cut up a kiwi fruit at tea time at work
-
I used the scissors on my Yeochamp to cut off some of the edges that were wearing off around a couple towels. Exciting stuff ::)
-
Climber: used can opener SD as a Phillips to remove shelving and to push in the tab of a can of MLB, scissors to trim hang nails, and knife to open a package. :-)
-
Sportsman: preparing a sandwich for breakfast at work...
:tool: -
Cheap, flea market Spartan did a good job processing tinder and kindling...enjoying a fire and a beer...I love rural living
Sent from my ADR6400L using Tapatalk 2


-
Breakfast. And to cut up some plastic bottles for makeshift plastic bag closing devices. Too early, need booze
-
The Redhead Hunts(wo)man (Heather) did a good job of clipping some stray hairs...
Styx, you got it, booze is always a solution :D (literally too)
-
yep, it's all about the hair of the dog
-
pliers, philips and tweezers of my skipper to change the needle of my girlfriend's sewing machine

very interesting; Skipper is not a very suitable tool for edc but it does my some daily works perfectly, i will write a rewiev about Skipper.
-
I christened the saw on my new 2013 Soldier with G10 kit in a flower bed. It worked great to get low like I needed. I could not bring myself to close the shiny knife with the dirty saw. so I clipped it on the outside of my pocket until I could bring it inside and clean the saw. Then took this quick, somewhat crappy, picture.
I'm liking the G10 conversion kit, I plan to convert another couple of knives when I have some time (BO Trailmaster for sure). It's a little weird having the clip on the top scale, but it seems to work OK.
I supect that these scales can't be reused as easy without glue because of the properties of the G10 being harder and more britle I think it is best to leave these attached once placed into position, but this is just speculation at this point. Definetly need a vice or a hammer to set these ones on.
The G10 is nice and grippy. It's not quite as grippy as my G10 Leek (which I love), but it seems to have a similar feel just more subtle.
This one is a new addition to my carry/work knives so I really wanted a good clip as it makes it easier for me to carry the 111mm in my pockets or packs. The shield on the clip is a really nice touch. The clip is not as strong as I thought it would be, but with the weight of the knife it seems to work very well and should not damage any material it is clipped to. The clip is screwed into threded metal inserts (like small t-nuts) embedded in the scales so it should be pretty secure.
Now i need to cut/grind the attachment point off. If I was smart I would have done this before I attached the scales, but I was not thinking ahead far enough.
Updated Photo.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
