The 30 Day Victorinox Huntsman Challenge!
-
Vicky, Go!

After reading this thread, sometimes I wonder am I fooling myself to spend the premium for buying knives with the so-called 'super' steel.

-
-
@Jothra said:
enki_ck: how on Earth did you know to post that while I was in the exact middle of writing this post? I hit the preview button, and there you were! Dark hoodoo!
...Never underestimate the power of the Dark Side.

:D
I couldn't sleep, was browsing the swiss forum and this thread and saw the little green light next to your name indicating you were online. :D
I'm glad Vicky is still going strong.

-
Hmmm, I'm really starting to wonder what you could do with one of the liner locking 111mm screwdriver/prybar's

I'm thinking you'll need a modded soldier 08 model with scissors ;)
-
@bmot said:
Hmmm, I'm really starting to wonder what you could do with one of the liner locking 111mm screwdriver/prybar's
I'm thinking you'll need a modded soldier 08 model with scissors ;)
I carried a Forester for awhile, and loved the prybar more than anything else it had to offer. The long saw is also amazing. I only stopped carrying it because it's so big (though not too thick, really.)
-
@nate j said:
I carry a Centurion daily at work, and it is the best folding large screwdriver/small prybar available on any MT today, IMHO.Agreed.
So, I know you might be getting tired of this, but bad things happened on Day 19. You probably don't want to read this unless you're a bad person who likes to see innocent tools suffer. You know, like me.
Anyway, the bulk of Vicky's work today was taking out anchor bolt templates, which are made of plywood, and hold anchor bolts in place for when the concrete foundation is poured around them. Each template has the above-pour sections of four anchor bolts coming through it. Some templates are easy toremove, and some are very, very hard.
All the easy ones were done.
First up, one template was just about ready to come up and out, but I couldn't get a grip on it anywhere. I needed to install a handle. If only Vicky had an implement I could misuse...

You know, I almost never use these to open wine.And success!

Vicky: 1. Templates: 0.The next template was completely surrounded by concrete on four sides, in a space too small for a sawzall or anything, so our only recourse was to tear it into itty bitty plywood pieces. Unfortunately, my hammer and prybar were too blunt to cut all the way through the plywood around the anchor bolt. What to do?
This is the scary part. Please put on your 3-D glasses now. Warning: not actually in 3-D.
I had a tool on me that had a narrow, chisel-like component, and has nothing to lose.
This may be a contender for the position of Worst Thing I Have Ever Done To A Multitool. The prize is derision and scorn.
Anybobanny, I managed to make enough of a split with Vicky to break a chunk of wood out, but my hammer missed the bottom ply of the board. Thus, a return to danger!

Seriously, this must be exactly the kind of thing Swiss Army Knives use for horror movie plots.I will point out again that this isn't really the sort of thing the Victorinox warranty was meant for. A tool broken through an activity like this doesn't need a warranty—it needs a priest.
Believe it or not, Vicky is very nearly unscathed.

Some slight, cosmetic, non-structural damage from the framing hammer strikes.And the screwdriver? Well...

It's just a scratch! Well, a few scratches. Nothing serious.See how little damage there is? I thought I had loosened up the screwdriver spring, because the snap was less snappy, but it turns out all it needed was a little mineral oil. Seriously.
Finally, something less scary: saws sawing sawsily.

Cleaning up gibbled wood so I can get into the real meat of the job.A little sawing so the anchor bolts could punch through the wood when it was hammered up, and everything is cool again.
If there's one thing Day 19 has taught us, it's the value of never letting Jothra test your tools. He's a real jerk.
What we actually learned is, of course, that Vicky is still winning. By a lot.
Let's hope I never have to take your anchor bolt templates out, or there will be crying the likes of which have only ever been found on Day 19!
-
That is unbelievable!
Go Vicki,go Vicki,go go go!
-
You :ashley:
:D
I think Vicky will need a lot of cocktails in a tropical location after this 30 day trial is over to forget all the horrors. ;)
Looking forward to the next entry into her diary. >:D
-
I don't feel so bad now when I use a hammer on a multi or sak.
Nice write up!sent from Ducttapetech's mobile device
-
Wow, I'm really impressed by how tough these things are proving to be. Especially to survive your torture and abuse ;)
-
@ducttapetech said:
I don't feel so bad now when I use a hammer on a multi or sak.
Nice write up!You should feel bad, and so should I. And thanks!
Day 20 did not, thank goodness, involve using an actual hammer on a Swiss Army Knife. Whew! What it did involve was notching plywood backing to fit it between steel studs. We cut the trenches themselves with a skill saw set to depth, which was easy. Sometimes, however, the notching wasn't 100% thorough. Then it was time for the least popular and most oft-maligned tool to lend another hand:
For thicker hangers-on that the saw didn't get on its first couple of passes, another tool saved the day (or at least some time and some tension headaches).

"I see you've played knifey-spoony before."Some other, non-related (and un-notched) backing needed screwing back into place, though unfortunately, some of it wasn't aligned with the beams anymore. I needed Vicky to offer a tool pointy enough to dig into the wood a bit, but strong enough to pry. I was pretty sure this would be bad for the blades or the awl, so I turned to a surprising alternative.

"Hey Vicky, can it?"
*"Yes it can...*opener.
(Vicky is lousy at punning.)It wasn't the most hardcore day Vicky's had, but we still got a lot a lot done.
Day 21, on the other hand, was almost nothing except opening a few cardboard packages and zip ties. Done!
Lopsided Days 20 and 21, amigos!
-
Sorry, I'm still getting over the trauma of seeing you hit Vicky over the head with a hammer. ;)
Still good reading though. :D
-
Nice workout there, reminds me of demi moore in that seal movie g.i.jane, after all this abuse we can call it G.I.VICKY from now on :D
-
-
I'm really enjoying this thread, as well as the other 30 day challenges. I use my multitools hard, but I draw the line at hitting them with framing hammers.
Thanks and Go Vicky!
-
:o
-
@3rdpig said:
I'm really enjoying this thread, as well as the other 30 day challenges. I use my multitools hard, but I draw the line at hitting them with framing hammers.Thanks and Go Vicky!
Normally precision hammer bombings are a bit more than my tools get, though just about everything else Vicky's done so far is something at least one of my past SAKs has survived.
Anyhey, Day 23 had an odd but not at all strenuous use for a nearly ubiquitous tool, and a possibly surprising but surprisingly possible use for another.
Did the pilot hole get drilled all the through the backing and the beam, or am I going to waste a screw? Wait a second, I can answer the first part of the question without resorting to the second! Thanks, Vicky!

Also, thank you, faithful toothpick! I sure wouldn't want to go in there.Oh, great—I have a huge pile of sixteen-footers on the back of a twelve-foot flat deck. I have flagging, which I need to attach by law, but just tying it never works (it basically always flies off). All I have to attach it with is a #2 Robertson screw. But I don't have any Robertson drivers, and neither does Vicky! How is Vicky going to solve this problem?
In all fairness, I knew this would work, but there are a couple of conditions. The first is that the screw can't be too tight, or the driver just skips out of the hole. The other is that you can't use this trick for too ridiculously many Robertson screws before you wear the driver down just enough to not work with #2 Robertsons anymore (though slot and Phillips screws still work as normal).
Good work, Vicky! Go ahead and take the rest of Day 23 off!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




