Car boot finds
-
I do indeed like that one Tony
I use one almost like it every day. Mine looks to be a bit shorter than yours though. And I am not familiar with the Moore & Wright company. Are they old-time Sheffield, or a relatively new company? -
They have been around for ever Bob
Their website says...
Founded in 1906 by innovative young engineer Frank Moore, Moore & Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineer’s tools.
Now part of the eminent Bowers Metrology Group and with production facilities in the UK and China, Moore & Wright continues its commitment to supplying worldwide industry with high quality, affordable products. Its ongoing pledge to research and development should ensure that Moore & Wright remains at the forefront of global innovation.

-
Thanks for the info Tony. It must be my area (which is very manufacturing oriented) was so well covered by the American and Japanese gauge makers that Moore & Wright never was able to break into the local market? Hard to say I guess. :-\ In any case, if they have been around that long they must know what they are doing.

-
I gambled on what might have been a rusty ripoff this morning
turned out well :D :DAlso a 5Lb Axe head, two more paint tin openers and a Stanley 'Dolphin'

-
Will you be dipping the drill press in vinegar too? >:D
-
Just for Mat and Bob's entertainment....
I bought a couple of tiny tiny 'King Dicks' :D


-
Them are a couple of cute little fellers Tony. :) I've heard the name (and chuckled) :D but I've never handled one before. They look pretty well made. Does it strike you as odd that the open slot on the handle is not on the same side on both wrenches?

-
The one on the left is a lot older (I'm guessing) the finish is a lot nicer and a nicer stamp,
Abingdon (Town near Oxford maybe?), No 0, King Dick, Trade * (a picture of a dogs face (or ugly man)) MarkThe one on the right is just a useable (and cute) tool just with King Dick stamped on the 'slidey bit'
Made in a different factory / era? :-\Really it just needs a bit of finishing off :)
-
I also picked these up ::)
A nice 3 bladed knife with 'Silver Steel' and a little oval shape on the tang but I don't thinks its Taylor eye

A nice pipe smokers knife in good condition made by Richards in Sheffield
An old pruning knife, marked 'Forged steel Foreign made'
which I think means 'made in Germany after the war'All the blades have been broken on this one :o and the largest re-profiled as a wire stripper, the plastic 'jigged bone' looks like it has melted at the edges, Please don't ask me why I bought it

It might say
Imperial
PAT NOs 2170537 2281782A really nice knife made by William Rodgers, Sheffield
Horn scales, brass liners and 'I CUT MY WAY' stamped on the tang :)
as you can see its been looked after and sharpened a million timesApart from the pipe smokers knife all the above blades have been sharpened until there's not much steel left, most are not ideal for pocket carry :) :-\ :(


-
Nice haul! I really like the pipetool.
sent from Ducttapetech's mobile device
-
@ducttapetech said:
Nice haul! I really like the pipetool.sent from Ducttapetech's mobile device
Its a cute little thing and in surprisingly good condition, the blade has not been used as a screw driver, the pokie tool is straight and not been poked somewhere it shouldn't

Will you be dipping the drill press in vinegar too? >:D
No because the bucket isn't big enough

But guess where the Ax is now
After a night in vinegar the 5 pounder turns out to be an Elwel 41/2 lb (weighs in a 4 3/4 lbs
) 
:D

-
@sparky415 said:
Nice one User24
I bought myself that exact drill when I started my apprenticeship many many years agome too ;)

-
Good to see you Ryan

Thats nice Mate

-
Nice haul! I really like the pipetool.
sent from Ducttapetech's mobile device
Its a cute little thing and in surprisingly good condition, the blade has not been used as a screw driver, the pokie tool is straight and not been poked somewhere it shouldn't

And a nice thing about being so small is that the "hammer" side doesn't look to be all mashed over from heavy pounding. :)
-
@sparky415 said:
Good to see you Ryan
Thats nice Mate

Ive got the cheaper nicad version actually ;) i was just trying to be posh
-
Good to see you Ryan

Thats nice Mate

Ive got the cheaper nicad version actually ;) i was just trying to be posh
You don't need to be posh with me you old tart :D
I really need to replace the batteries on my DeWalts ::) ....... have you see the prices of replacement batteries???

-
Nice haul! I really like the pipetool.
sent from Ducttapetech's mobile device
Its a cute little thing and in surprisingly good condition, the blade has not been used as a screw driver, the pokie tool is straight and not been poked somewhere it shouldn't

And a nice thing about being so small is that the "hammer" side doesn't look to be all mashed over from heavy pounding. :)
I would never do that!

In my defense, if you are laying on your back under a bath squeezed in next to a toilet, it would be a bit silly to squeeze back out for a hammer when you have 2lbs of Sheffield steel in your hand :D
-
Good to see you Ryan

Thats nice Mate

Ive got the cheaper nicad version actually ;) i was just trying to be posh
You don't need to be posh with me you old tart :D
I really need to replace the batteries on my DeWalts ::) ....... have you see the prices of replacement batteries???

Not sure if these are any good but theyre a bit cheaper
http://www.amazon.co.uk/s/ref=nb_sb_noss?url=search-alias%3Delectronics&field-keywords=PowerSmart+dewalt&rh=n%3A560798%2Ck%3APowerSmart+dewalt -
Thanks for that, I was looking at trying to replace the cells in the batteries but I'm not sure how successful I would be or if I would just waste my money trying

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login