Steam Cleaning
-
Has anyone tried steam cleaning their knives?
I picked up a second hand Vic Huntsman the other day. I wanted it to replace my Leatherman Charge in my overnight bag seen as the charge isn't UK legal carry, and I actually needed a corkscrew a couple of weeks ago!
It's in generally very good condition but did have some crud in the hinges. There's nothing worse than someone els's pocket fluff and skin in your knife.
So I thought I'd try blasting it out with a Vax grime master:

I steamed it with all the blades open and then again with all the blades shut and the thoroughly dried and oiled it and I have to say it looks and feels like new
and it only took five min.

It's my first non alox SAK! -
good to know. I might have to try that one day

-
I should mention when it's hot from the steamer I guess things expand a bit and the blades become a bit stiff, but they are fine again when it cools down. I imagine any lube there is gets blasted out too, so make sure you have some appropriate oil handy. I used hair clipper oil I'm not sure it's the best thing but it seems to do the trick.
-
I'm glad it worked for you. My concern would be that if you let the knife get too hot, the scales could warp, like what can happen if you try to clean an SAK in the dishwasher. Be careful if you try this on other knives.
As for oil, I think most people around this forum use mineral oil, as it is safe if you use your knife to prepare food. I use 3-in-1 oil. Victorinox actually makes their own special Swiss Army Knife oil too. WD-40 is usually avoided as it might gum up the knife.
-
I'd be concerned about scale warpage due to heat too. Seems a high percentage of scales will warp when washed in a dishwasher on the hot cycle, and I'd guess that steam's a few degrees hotter than that.
I tend to my SAK's with WD40, rags, toothpicks, small files as "picks", steel wool, and finally simichrome for a lustrous, burnished look. I lube afterwards with almost any fairly thin liquid lube. -
Steam cleaning is great for a lot of things, now i dont know at what temperature does the steam come out but i heard from a professional cook once that putting your knife in boiling water its not a good idea, i dont know if the same applies to steam or if the advice he gave me is accurate. Just something to have in mind.
-
@neillcurrie said:
I'd be concerned about scale warpage due to heat too. Seems a high percentage of scales will warp when washed in a dishwasher on the hot cycle, and I'd guess that steam's a few degrees hotter than that.
I tend to my SAK's with WD40, rags, toothpicks, small files as "picks", steel wool, and finally simichrome for a lustrous, burnished look. I lube afterwards with almost any fairly thin liquid lube.Pipe cleaners, Q-tips, and a very fine screwdriver for digging out the crud from narrow slits are also handy.
-
I've never done the steam cleaner (I don't own one) but I have put MTs and SAKs in the dishwasher with the heated dry on with no issues. I don't do this often, only when absolutely necessary. I then use 3 in 1 to lube up the joints and wipe down the tool. I also use pipe cleaners, q-tips, dental picks etc for cleaning.
-
I don't think these household steam cleaners are anything like as hot as the high pressure steam you see used industrially. As I had the steam cleaner out to clean my home brew kit I blasted the end of a brewing thermometer with it and from memory it was about 115'c. I think it's the pressure that does most of the cleaning. I wouldn't be too worried about the scales unless it was somthing rare or valuable.
I used the hair clipper oil because I thought it will most likely be fairly safe.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login