SwissChamp
-
Uploaded with ImageShack.com -
Uploaded with ImageShack.com
-
That web site is no longer operating. Is there an alternative source of this information, please?
-
http://ww2.saam007.com is the site I meant. Tapatalk and I are not getting along well today. :(
-
Welcome to the forum, Marc.

Yes, we know. Saam007 went down about a week ago. :-\
Here's the info I managed to save from google cache. And there's this document too.
Small Blade
- (pre 1973) small clip point blade
- (1973-Now) small pointed tip blade
Combo Tool
(Since 1986) Combo ToolDivot Repair Tool
(1992-1999) Divot Repair ToolCorkscrew
- (pre 1983) 5 loops fluted corkscrew
- (1983-1991) 4 loops fluted corkscrew
- (1991-now) 4 loops solid corkscrew
Phillips screwdriver (Backspring)
- (1952-XXXX) square, file, no can-key
- (XXXX-XXXX) square, no file, no can-key
- (XXXX-XXXX) square, no file, can-key
- (1992?-XXXX) round, can-key
- (XXXX-now) round, no can-key
Still gathering information on this tool.
Can Opener
- (1891-1946) Can Opener
- (1946-1951) PAT. Can Opener
- (1951-1980?) new PAT. with small screwdriver
- (1980?-Now) no PAT. logo
Cap Lifter
- (1942-1951) cap lifter with screwdriver
- (1951-1980?) adds wire stripper and bender
- (1980?-1985) drop wire stripper
- (1985-Now) 90° lock
Reamer
- (pre 1961) reamer
- (1961-1985) reamer with cutting edge
- (1985-Now) reamer with sewing eye
Scissors
- (1902-1975) Single spring and screw joint
- (1975-1992) Double spring and screw joint *
- (1992-2000?) Double spring and rivet joint *
- (2000?-Now) Double spring and rivet joint **
- Scissors with guiding groove since 1990.
** left handle end is a little thinner.
There are more (older) variations of the scissors. The information about them will be added in time.
Multipurpose Hook
(since 1991) multipurpose hook
(since 1998) multipurpose hook with file *- on some models (like Compact). other models still using the hook without file.
Long Nail File
(1942-2000?) Long Nail FileFish Scaler
- (1952-1975?) Fish Scaler with magnatic tip
- (1975?-1985/6?) adds ruler
- (1985/6?-Now) drop magnatic tip *
- variation 3 looks like variation 2.
Wood Saw
- (1902-1950?) with nail nick
- (1950?-1970?) without nail nick
- (1970?-Now) sawtooth changed
Fine Screwdriver (Backspring)
- (1977-1985) fine screwdriver
- (1985-Now) fine screwdriver
Metal file
- (1952-1975?) metal file
- (1975?-1990?) metal file with nail cleaner
- (1990?-2005) metal file with nail cleaner
- (2005-Now) metal file stainless grinded
Chisel
(1985-Now) chiselMagnifying Glass
- (1973-XXXX) 8x magnifying glass
- (2004-Now) 5x magnifying glass
Phillips Screwdriver
- (1973-Now) phillips screwdriver
- (2002-Now) shorter phillips screwdriver
Phillips Screwdriver v.1 combined with magnifying glass while Phillips Screwdriver v.2 combined with LED light.
LED light
(2002-Now) LED lightPliers
- (1986-1988) 2.5mm width pliers
- (1988-1995) 3mm pliers with no crimper
- (1995-Now) 3mm pliers with crimper
Pharmaceutical Spatula
(1992-Now) Pharmaceutical SpatulaBits Wrench
(1999-Now) bit wrench and bit caseLighter
(2002-2005) LaserFlame lighterShackle / Keyring
- (1902-1968) shackle
- (1968-1991?) keyring on lining (corkscrew layer)
- (1991?-Now) keyring on spring (reamer layer)
Tweezers
- (1902-1957) nickel silver tweezers
- (1957-1978) aluminium tipped tweezers
- (1978-Now) plastic tipped tweezers
- (2001-Now) plastic tipped small tweezers *
- used with electronics scales.
Toothpick
(1902-Now) toothpickMini-Screwdriver
- (1983-2000/3?) Mini-Screwdriver
- (2000/3?-2008/9?) head changed
- (2008/9?-2009) No "PAT"
- (2009-Now) hexagonal shape and shorter
Ballpoint Pen
(1985-Now) ballpoint penPin
(1991-Now) pinSwiss Watch
- (1990-XXXX) Roman numerals
- (XXXX-2007) Arabic numerals
Electronics
(2000-2008) Altimeter electronics
(2001-Now) Voyager electronics
(2005-Now) Traveller electronics -
Enki_ck, thank you! ;D
-
I think I bought my Swiss Champ in 1988 or 1989. Nope, mine has a hook sans file, so it must have been later than that. Mine has the lanyard ring by the reamer, the old magnifying glass, a smooth corkscrew, scissors with screw, and a smooth glasses screwdriver. Apparently I have a version of the variation 2.
Mine has been a fixture in my briefcase for decades. :)
-
See attached PDF. I am an old SwissChamp fan, my first real SAK it was one of these bought many years ago, similar to couple of other guys here (OP included) although mine old SC is a bit newer than those.
Since then I acquired several more, some much older than my first one.
How I see it, pros and cons:
Pro (old versus new):
-
Full tang on main blade and better finishing on the spine. The new one has a spacer built in the al liner in there, like the Economy Recruits of 20+ years ago :(
-
Magnifying glass: real glass and sturdy plastic frame. I cannot stand the crappy one piece clear plastic - it scratches up and fogs in no time. Oh, and also gets attacked by alcohol.
-
Longer Philips screwdriver.
-
Solid Cellidor scales (new one are hollow).
-
Overall quality (liners better finished on the edges, etc). Night and day if you know what to look for.
Overall the new SC looks to me like a poor cheap smurf version of the old.
Pro for the new one, just one:
- The SS metal saw. Although I cut with the old one and pure function it seemed a better tool. It was not soft SS for a reason. So this too may move up as a pro for the old one.
My 2c
-
-
I wish there were evolution of ______________ files for every SAK.
that was a very informative 2 sheets, and I loved it.
I have a champion, but to have a breakdown of all that good info would be amazing for each product line.
-
@detron said:
I wish there were evolution of ______________ files for every SAK.that was a very informative 2 sheets, and I loved it.
I have a champion, but to have a breakdown of all that good info would be amazing for each product line.
I'm writing a book that will be exactly this. It's going to take some time, however. Some product lines go back a little further than 1986 :).
BTW, did you know there are actually four variations of the 91mm pliers, not three? The version not mentioned in Jamie's document is actually the third variation (the version with the crimper is actually the fourth variation). #3 looks exactly like #4 except w/o the crimper. In other words - straight rivet joint (not angled) and cam groove for the spring.
-
I think I saw someone mention a third version of the mag glass with a clear plastic frame but now with a glass lens...
-
I wish there were evolution of ______________ files for every SAK.
that was a very informative 2 sheets, and I loved it.
I have a champion, but to have a breakdown of all that good info would be amazing for each product line.
I'm writing a book that will be exactly this. It's going to take some time, however. Some product lines go back a little further than 1986 :).
BTW, did you know there are actually four variations of the 91mm pliers, not three? The version not mentioned in Jamie's document is actually the third variation (the version with the crimper is actually the fourth variation). #3 looks exactly like #4 except w/o the crimper. In other words - straight rivet joint (not angled) and cam groove for the spring.
If you finish it, feel free to pm me and say "buy this now"
Sent from my SPH-L720 using Tapatalk 2
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login