Any love for Wenger?
-
Wenger limited Woods.
Available aprox at Nov 2013. Number of sets unknown (pic says 0001/2013)?
Greetz
Markus
I hope it is ok i post this info

2013 is a very special year for the WENGER brand.
For a start, we are celebrating our 120th birthday.
It is also the last year in which WENGER knives are
being produced. To mark this occasion, we
decided to design a very special and exclusive 2013
sets limited collection that highlights and
impressively demonstrates the innovation and
globality of the WENGER brand.probarbly it is 2013 pieces made, not sure. My info say they will be available in October.
Very nice set
but too expensive
!I think we should find the same (but cheaper) on other websites store in Germany or in Switzerland.
-
Wenger limited Woods.
Available aprox at Nov 2013. Number of sets unknown (pic says 0001/2013)?
Greetz
Markus
I hope it is ok i post this info

2013 is a very special year for the WENGER brand.
For a start, we are celebrating our 120th birthday.
It is also the last year in which WENGER knives are
being produced. To mark this occasion, we
decided to design a very special and exclusive 2013
sets limited collection that highlights and
impressively demonstrates the innovation and
globality of the WENGER brand.probarbly it is 2013 pieces made, not sure. My info say they will be available in October.
Very nice set
but too expensive
!I think we should find the same (but cheaper) on other websites store in Germany or in Switzerland.
Yes it is on the expensive side, probably the collectable value on these will be very high in the near future.
-
I think this will be a very nice set. The information I have says there are 2013 sets. I'd sure LOVE to have number 13 or number 1 :ahhh. The marketing images looks pretty good and the box looks really nice as well.
-
I love old Wengers...
1920's or before... This one is broken and it's waiting to be repared...
1930's to 1950's
1950's
1950's
1960's
1970's
-
Old wengers are really 8)
-
Those are VERY nice. There is a picture of some old Wengers in the SAK-OM book, but I think the timeline one has at least the first two knives on the left in the wrong order. What do you think?
-
@ICanFixThat said:
Those are VERY nice. There is a picture of some old Wengers in the SAK-OM book, but I think the timeline one has at least the first two knives on the left in the wrong order. What do you think?With informations I have (from Wenger, catalogs and others sources) I think it's the good order, but... Nobody can be absolutly sure.
Lot of Wenger timeline we can find on the web and some time in books are wrong so we have to read it carfully...
But if you have more informations about this period I would be pleased to know them.
-
Loads of love for this Wenger!¡!

-
That's one cool Wenger Terry

-
@ICanFixThat said:
Those are VERY nice. There is a picture of some old Wengers in the SAK-OM book, but I think the timeline one has at least the first two knives on the left in the wrong order. What do you think?If you mean the Evolution of Wengers on page 43: the second one with the weird plastic shield has stainless steel blades so it is likely that the first one, with carbon steel, is older. But yeah, Wenger history, what with the devastating factory fire of 1986, records lost, is hazy at best.
-
@J Mackrel Jones said:
Those are VERY nice. There is a picture of some old Wengers in the SAK-OM book, but I think the timeline one has at least the first two knives on the left in the wrong order. What do you think?
If you mean the Evolution of Wengers on page 43: the second one with the weird plastic shield has stainless steel blades so it is likely that the first one, with carbon steel, is older. But yeah, Wenger history, what with the devastating factory fire of 1986, records lost, is hazy at best.
Yes that's the picture I was referring to. I think I have that shield on a knife with carbon blades, black fiber handles, and a very old tool (threaded drill bit), but let me check again as I've been too busy to pay close attention to my SAKs. What is the length of the knife in the picture?
Does anyone know the name of the tool that looks like a course threaded drill bit? It's quite common on very old pocket knives from other manufacturers, but I don't have a name for it.
-
@J Mackrel Jones said:
Those are VERY nice. There is a picture of some old Wengers in the SAK-OM book, but I think the timeline one has at least the first two knives on the left in the wrong order. What do you think?
If you mean the Evolution of Wengers on page 43: the second one with the weird plastic shield has stainless steel blades so it is likely that the first one, with carbon steel, is older. But yeah, Wenger history, what with the devastating factory fire of 1986, records lost, is hazy at best.
Yes that's the picture I was referring to. I think I have that shield on a knife with carbon blades, black fiber handles, and a very old tool (threaded drill bit), but let me check again as I've been too busy to pay close attention to my SAKs. What is the length of the knife in the picture?
Does anyone know the name of the tool that looks like a course threaded drill bit? It's quite common on very old pocket knives from other manufacturers, but I don't have a name for it.
@ICanFixThat & J Mackrel Jones
Hello gentlemen,
The length of the first knife is 90 or 91 mm and length of the second knife is 80 mm.
I have the same doubts as you for these 2 knives and I have also read the page 43 of the book "The Swiss Army Knife Owner's Manual" by Michael Young witch is a very good book.
So I can only bring more informations :- For these 2 knives, blades are in stainless steel (not carbon steel)
- It seems, but it is not sure, that Wenger has used stainless steel as early perhaps in 1915 or 1919 so before Victorinox (1921 or 1923 according to speSmurfpillsts)
- In a catalog "Wenger & Co" dating from 1908 to 1922, we can already see the logo of the first knife handle, but not the logo of the 2nd knife. (I'm sorry I can't post pictures on this forum because of a copyright)
- The first knive is stamped "Wenger Tahara" with the 3 faces triangle logo of "Coutellerie Suisse", the second is only stamped "Wenger Tahara".
For these reasons I have assumed that the first knife would be a bit older than the second.
I have also an old "Coutellerie Suisse" with carbon steel blades and only a 3 faces triangle stamp on the blade but without logo on handles, I guess we can estimate its dating between 1910 and 1920 :

With Wenger it is difficult to locate only with carbon steel or stainless steel, because it seems that the use of these two steels continued into the 1950s for some other knives as the third and fourth knife pictures, whitch year is identified by the stamp : 1951.
I suppose also that the logos on handles of the 2 first knives were produced over a same period of overlap, it can be 5 or 10 years, but I am pretty sure that the origin of the 1st logo is prior to the 2nd, because of the catalog "Wenger & Co".
-
Thanks for the information. I don't think there can be any copyright left on a published work over 100 years old, let alone a catalog from that date. If it is a more recent reprint of the catalog contained in another publication what is the name of that publication?
My knife,carbon steel, with the red shield/white cross inlay has WENGER DELMONT with 3 faces logo on both the small and large blades which are in separate layers; both pivot at the top of the knife. It has an interesting imprint on the bottom scale of some insect in an oval, hard to see now.
It's interesting that Wenger's 100 year anniversary book does not mention this shield.
Pictures when I have more time.
-
@ICanFixThat said:
Thanks for the information. I don't think there can be any copyright left on a published work over 100 years old, let alone a catalog from that date. If it is a more recent reprint of the catalog contained in another publication what is the name of that publication?....
These are photos of a guenine Wenger & Co catalog and the source is verified and true. But these photos are copyrighted by a french forum and contains links to stores website.
I promised to Grant Lamontagne I will not post direct link nor photos with links. I'm sorry. -
Mr Young says that the first knife in the page 43 photo is without doubt carbon steel with carbon steel liners and divider, and the second one stainless with nickle-silver liners and divider, and that the first one (tang stamp Wenger Delemont) measures just over 92 mm, the second one (tang stamp Wenger Tahara) 82 mm.
Wenger has said they made a model 112 with stainless steel starting in 1919. Is there any documentation of an earlier date for stainless steel by Wenger (or by Victorinox)? Victorinox has given their date as both 1921 and 1923.
Would love to see the "insect in an oval" Wenger tang stamp ! -
@J Mackrel Jones said:
Mr Young says that the first knife in the page 43 photo is without doubt carbon steel with carbon steel liners and divider, and the second one stainless with nickle-silver liners and divider, and that the first one (tang stamp Wenger Delemont) measures just over 92 mm, the second one (tang stamp Wenger Tahara) 82 mm.
Wenger has said they made a model 112 with stainless steel starting in 1919. Is there any documentation of an earlier date for stainless steel by Wenger (or by Victorinox)? Victorinox has given their date as both 1921 and 1923.
Would love to see the "insect in an oval" Wenger tang stamp !Yes, I saw that, but mine (like the first on page 43) is stainless steel with nickel-silver liners without doubt too !
And I have another (is actually in repair so I have no photo) with stainless steel blades, carbon steel liners and a bail.My first knife on photos (like the second one of page 43) is also stainless steel with stainless steel with nickel-silver liners.
So I think differents logos were produced over a same period of overlap and Wenger used both carbon steel and stainless steel for several knives on a same period.
I have no more information on the beginning of the use of stainless steel in Wenger brand and I think that the year 1919 mentioned in the book of M Young is probably true.
I will visit the Wenger factory in few days, I hope I will have more informations...
I would like to see the "insect in an oval" too and also the old tool (threaded drill bit) ! Could you post photos ?
-
@J Mackrel Jones said:
...... Would love to see the "insect in an oval" Wenger tang stamp !I think you misread my post. The tang on mine "has WENGER DELMONT with 3 faces logo on both the small and large blades".
The 'insect in an oval' is just an imprint stamped into the bottom scale.
Pictures coming when I can.
-
Ah yes, you did say Bottom scale.
Wenger (make that Boechat) had some zany tang stamps and I got excited. -
@basilio said:
To just agree with both Francis and Chako, I would consider it an iconic failure. :)
While you all probably know how much I'm in love with the Wenger brand, I must admit that they failed really hard on this.
Don't really know what they were thinking while developing this tool.
Chances that a businessman would need a mutitool on his desk are close to none, in my opinion.I use my Wenger BT nearly every day! It's actually quite functional! :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
