Leatherman PST chronology project
-
I will post my "Marlboro" pix asap. However, please explain the nuance "pivot in or pivot out"
-
@Bibliojim said:
I will post my "Marlboro" pix asap. However, please explain the nuance "pivot in or pivot out"Jim
[email]dryfire@dryfire.is[/email]Newer screwdrivers on the PST are bent(?) so that the line the force down is given on is on the side of the pivot it doesn't turn to, so that it'll close less easy.
some searching laterthis should help explaining it:
@J-sews said:
Here are some examples of the screwdriver differences. When pushed hard, the early screwdrivers tended to "pivot inwards" under pressure. This was improved on later models, which featured screwdrivers that pivoted outwards against the stop the harder they were pushed. :)
Benner pictures


DaveK picture showing the three types of medium flathead screwdriver

-
Sooooooo, my Marlboro STRAIGHT screwdrivers are "pivot in" ????????????????????????
Jim
-
I'm sure, when you post pics, we'll see it ;)
But it could very well be that some of the screwdrivers in your pst pivot in, and some pivot out. On mine, only the large and medium flatheads pivot out, the Phillips and small flat pivot in. -
@Monrogue said:
Here is the open plier pic I mentioned, and the medium flathead (newer style correct?)Sent from my XT901 using Tapatalk 2
I may have misunderstood the whole "pivot in/out" thing as well. So is the screwdriver I showed in the second pic of the above post that contains the text I quoted (couldn't quote the pic as well I guess) a pivot in or out? I think I called it in, but now I think it's an out
??? -
Here is the open plier pic I mentioned, and the medium flathead (newer style correct?)
Sent from my XT901 using Tapatalk 2
I may have misunderstood the whole "pivot in/out" thing as well. So is the screwdriver I showed in the second pic of the above post that contains the text I quoted (couldn't quote the pic as well I guess) a pivot in or out? I think I called it in, but now I think it's an out
???That's a 'pivot out' screwdriver. It turns to the outside when you put force on it, hence the name. (it pivots out when under force) The older ones turn inside (they 'pivot in'). It all comes from the verb 'to pivot', not from the noun 'pivot'. (if I'm right, of course ;) )
-
Here is the open plier pic I mentioned, and the medium flathead (newer style correct?)
Sent from my XT901 using Tapatalk 2
I may have misunderstood the whole "pivot in/out" thing as well. So is the screwdriver I showed in the second pic of the above post that contains the text I quoted (couldn't quote the pic as well I guess) a pivot in or out? I think I called it in, but now I think it's an out
???That's a 'pivot out' screwdriver. It turns to the outside when you put force on it, hence the name. (it pivots out when under force) The older ones turn inside (they 'pivot in'). It all comes from the verb 'to pivot', not from the noun 'pivot'. (if I'm right, of course ;) )
Makes perfect sense. I was thinking of it in the noun sense of the word, which reverses what the intended meaning is here. Thanks for clearing that up for me

-
knurled screws
• Lanyard attachment? Yes
• (Old) small diameter plier pivot?
• LEATHERMAN cast into plier pivot with USA?
• A hard wire cutter notch? No
• Handles stamped with
US REG TM 1325473 LEATHERMAN TOOL PORTLAND OR
Reverse side blank Date 0594
Other handle: Very faintly etched Marlboro Country Store
Reverse side blank Date 0494• Inch ruler only, or inch/metric? Both
• Date codes? See above
• Drop point knife blade or clip point? (saber?) See pix and decide
• Knife blade tang stamped LEATHERMAN with USA
• Screwdrivers: pivot-in or pivot-out?
Ay, there's the rub. Nouns, verbs, straight, bent, innies. outies, Bob Newhart.........Old, OCD, collector of things, new to Leathermans, more than pleased with this flea market Marlboro Leatherman purchase. Found this site, well there you go.
Sent a Blast for repair, received a new Rebar in it's place. Not for this pilgrim, PST forever. Who needs a new Rebar, will trade?
Hello everybody.
Your friend Jim“Where is everybody?” Enrico Fermi 1950


-
That looks like 'pivot in' screwdrivers

-
Black Oxide Non Cap Crimper
• Rivets or knurled screws?
Knurled screws.• Lanyard attachment?
Yes• (Old) small diameter or (new) large diameter plier pivot?
Old• LEATHERMAN cast into plier pivot, along with USA or TOOL?
USA• A hard wire cutter notch?
No• Handles stamped with what?
Leatherman Tool, Portland OR, US REG TM 1325473• Inch ruler only, or inch/metric?
Inch/metric• Date codes? What are they?
None• Drop point knife blade or clip point?
Saber• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman USAplease correct me if I made a mistake pictures included. Im excited this is my first PST
-
This PST has no markings on it except the Pat. number and a former owners initials. DaveK has a pic of one in post #149. Even the sheath does not have Leatherman on it. Any one care to speculate on where these fit into the chronological order.
:) -
@David said:
This PST has no markings on it except the Pat. number and a former owners initials. DaveK has a pic of one in post #149. Even the sheath does not have Leatherman on it. Any one care to speculate on where these fit into the chronological order.
:)Interesting. Dave seemed to think that the markings had possibly been ground off his, but with yours being the same that seems less likely.

@Aloha; nice BO PST mate, it looks like it's in great condition as well.
Nice nails too. :D -
This PST has no markings on it except the Pat. number and a former owners initials. DaveK has a pic of one in post #149. Even the sheath does not have Leatherman on it. Any one care to speculate on where these fit into the chronological order.
:)Interesting. Dave seemed to think that the markings had possibly been ground off his, but with yours being the same that seems less likely.

I have a idea but wanted to wait to see what others thought about it. :)
-
Go on, what are you thinking? Employee special? Pre production?
:) -
Military issue? I think I read somewhere that the US military issue gear has/had to be free from any branding/manufacturer names. Or was that just for watches?

-
@David said:
This PST has no markings on it except the Pat. number and a former owners initials. DaveK has a pic of one in post #149. Even the sheath does not have Leatherman on it. Any one care to speculate on where these fit into the chronological order.
:)That's the same as my minitool.
Except mine doesn't even have a patent number. -
I'm hoping to have a PST to add later tonight

-
I got my PST today, and it looks to be in great condition, and I think it's an older one. Here's the info:
Rivets or knurled screws? Knurled
• Lanyard attachment? Yes
• (Old) small diameter or (new) large diameter plier pivot? **Old small pivot **
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? Leatherman USA
• A hard wire cutter notch? No
• Handles stamped with what? (see pictures in next post for examples) LEATHERMAN(r) TOOL US REG TM 1325473 PORTLAND OR on front; nothing on the back
• Inch ruler only, or inch/metric? inch/metric
• Date codes? None
• Drop point knife blade or clip point? Saber :D (I think)
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? LEATHERMAN USA
• Screwdrivers: pivot-in or pivot-out? pivot-inHere are some pics. Can anyone confirm if the blade is a Saber point for sure?
Left is my other PST, and right is this new one
-
@Gareth
thank you I fancied up a bit for the picture ::)
the PST I received was in near mint condition other than some wear marks on the plier which looks to be only from it being opened. all others implements are unused as far as I can tell. -
Nice no date PST MR.
:)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



