Rebar Owner's Club (pic heavy)
-
Maybe you should loosen them? I'm not sure what exactly would happen if you loosen them as I've never dabbled in that with mine. Mine opens/closes smoothly and the cutters don't touch in an interfering way. They also cut paper. I love the Rebar pliers, and the Rebar in general

-
@Monrogue said:
Maybe you should loosen them? I'm not sure what exactly would happen if you loosen them as I've never dabbled in that with mine. Mine opens/closes smoothly and the cutters don't touch in an interfering way. They also cut paper. I love the Rebar pliers, and the Rebar in general
Thanks I will loosen them just a touch. The one thing I did notice about the Rebar is that the slight buldge out the handles make in the closed position. The ST300 does not do this
Sent from my MB855 using Tapatalk 2
-
Maybe you should loosen them? I'm not sure what exactly would happen if you loosen them as I've never dabbled in that with mine. Mine opens/closes smoothly and the cutters don't touch in an interfering way. They also cut paper. I love the Rebar pliers, and the Rebar in general

Thanks I will loosen them just a touch. The one thing I did notice about the Rebar is that the slight buldge out the handles make in the closed position. The ST300 does not do this
Sent from my MB855 using Tapatalk 2
Cool, let us know how that works out for you. Oh do you mean that section that sticks out at the bottom of the sloped area? I thought that was odd myself, but it may have something to do with the rolled edges to the handles so that they don't hurt when using the pliers.
It may be due to the fact that they were trying to make it slim and that area and along the edges had to stick out to allow room for the rolled edges? Not sure, but I imagine the ST300 must have the rolled edges too, unless that's not the case. -
Maybe you should loosen them? I'm not sure what exactly would happen if you loosen them as I've never dabbled in that with mine. Mine opens/closes smoothly and the cutters don't touch in an interfering way. They also cut paper. I love the Rebar pliers, and the Rebar in general

Thanks I will loosen them just a touch. The one thing I did notice about the Rebar is that the slight buldge out the handles make in the closed position. The ST300 does not do this
Sent from my MB855 using Tapatalk 2
Cool, let us know how that works out for you. Oh do you mean that section that sticks out at the bottom of the sloped area? I thought that was odd myself, but it may have something to do with the rolled edges to the handles so that they don't hurt when using the pliers.
It may be due to the fact that they were trying to make it slim and that area and along the edges had to stick out to allow room for the rolled edges? Not sure, but I imagine the ST300 must have the rolled edges too, unless that's not the case.First,
loosened the cutters about 1/100th of a turn each, and they do not touch, but will cut paper. :DSecond
I bought a ST300 at the same time as my Rebar, and it it flat, (no bump) but it does have the rolled edges. The Rebar laying closed on a table can rock side to side, like a messed up table, the ST300, has no movement at all.Not a big deal, I just thought my Rebar was damaged, until I saw other pix of the Rebar, and noticed the hump on them.
I am much happier with the Rebar than I expected to be. the file may not be diamond (One reason I love my Surge!) but it is super aggressive!
I also noticed that the Rebar pliers open a little wider than the ST300

-
Maybe you should loosen them? I'm not sure what exactly would happen if you loosen them as I've never dabbled in that with mine. Mine opens/closes smoothly and the cutters don't touch in an interfering way. They also cut paper. I love the Rebar pliers, and the Rebar in general

Thanks I will loosen them just a touch. The one thing I did notice about the Rebar is that the slight buldge out the handles make in the closed position. The ST300 does not do this
Sent from my MB855 using Tapatalk 2
Cool, let us know how that works out for you. Oh do you mean that section that sticks out at the bottom of the sloped area? I thought that was odd myself, but it may have something to do with the rolled edges to the handles so that they don't hurt when using the pliers.
It may be due to the fact that they were trying to make it slim and that area and along the edges had to stick out to allow room for the rolled edges? Not sure, but I imagine the ST300 must have the rolled edges too, unless that's not the case.First,
loosened the cutters about 1/100th of a turn each, and they do not touch, but will cut paper. :DSecond
I bought a ST300 at the same time as my Rebar, and it it flat, (no bump) but it does have the rolled edges. The Rebar laying closed on a table can rock side to side, like a messed up table, the ST300, has no movement at all.Not a big deal, I just thought my Rebar was damaged, until I saw other pix of the Rebar, and noticed the hump on them.
I am much happier with the Rebar than I expected to be. the file may not be diamond (One reason I love my Surge!) but it is super aggressive!
I also noticed that the Rebar pliers open a little wider than the ST300

Oh good, glad that did the trick for you

Yeah, that bump did bug me, and sometimes does when I wish it would lay flat on a surface, but it really makes no difference in the end. I do also wish it had a diamond file (the biggest strike against it for me), but its overall awesomeness makes up for that

-
Not sure if I posted this already, but anyway, I got one too, and I love it :) Really impressed with the cutters, I cut some steel cable with it (the kind that's in the rim of the outer tires of some old wrecked bikes I disassembles) and they went through like through butter :)
-
I'm in.
just picked up a black oxide rebar.
my has been very smooth . Excellent fit and finish.
-
Congrats on joining the club guys
The Rebar is awesome, and I hope you enjoy them 
-
Just received a new Rebar, a LM exchange for a non-repairable Blast. If I'd known then...........
Do you know the country of origin, mine has no markings?Jim
-
@Bibliojim said:
Just received a new Rebar, a LM exchange for a non-repairable Blast. If I'd known then...........
Do you know the country of origin, mine has no markings?Jim
All Leatherman's are made in the USA (Portland, Oregon) Though I believe some parts, or the steel or something, could come from somewhere else, if I'm right.
-
Just received a new Rebar, a LM exchange for a non-repairable Blast. If I'd known then...........
Do you know the country of origin, mine has no markings?Jim
All Leatherman's are made in the USA (Portland, Oregon) Though I believe some parts, or the steel or something, could come from somewhere else, if I'm right.
They are assembled in the US and most parts are made in the US, I think pliers (Mexico) and files (Austria/Switzerland/ not sure exactly ) are made outside of the US. Cause of this ruling by a California court: http://www.leatherman.com/about/release?id=20
if even a screw is made outside of the US, it can't say made in the US. ::) -
I don't think I posted this pic here, yet

My Rebar out drying in the back yard :)
Oh, and don't worry, it's got it's teeth back now. :D

-
A year ago I bought myself a Rebar, but it broke down on me after 2 days or so, they gave me a new one in the store but this one also had some problems, so I bought myself a Wave and vowed never to buy a Rebar again (more info here).
Until yesterday ... ::)
So I guess I'm back in the club 8).
P.S. Any of you guys ever placed the Rebar in that "new" al black Leather Wave sheath, I would like to know how it fits in that one (if it's not to loose), because I would like a Leather sheath for my Rebar with a pocket on the side for my MAG-lite Solitaire LED. Maybe someone who has pics of a Rebar in the Leather Wave sheath, or else, just your thoughts on it.
-
Cool pic TG
Unfortunately I can't help you with the sheath question as I don't have one of those Wave sheaths. Nor do I use sheaths. I'm glad you're back in the club though, and I hope this Rebar works out for you :D -
@Top-Gear-24 said:
A year ago I bought myself a Rebar, but it broke down on me after 2 days or so, they gave me a new one in the store but this one also had some problems, so I bought myself a Wave and vowed never to buy a Rebar again (more info here).Until yesterday ... ::)
[piccie]
So I guess I'm back in the club 8) .
P.S. Any of you guys ever placed the Rebar in that "new" al black Leather Wave sheath, I would like to know how it fits in that one (if it's not to loose), because I would like a Leather sheath for my Rebar with a pocket on the side for my MAG-lite Solitaire LED. Maybe someone who has pics of a Rebar in the Leather Wave sheath, or else, just your thoughts on it.
First: nice pic

Second: On the sheath, I carry my Rebar in one of the nylon sheaths (came with a Charge, I believe) and it fits quite nice in there, if all the other pockets are filled up. It's a bit loose if they aren't. I filled my sheath with a PocketWrench II in the 'back pocket', either a Vic Alox Vagabond or a LM Micra in one of the sides, and a Fenix E01 in the other side. Together, that makes for a nice, tight package.
-
Thanks for the replies guys
.I have two of those Nylon Wave sheaths lying around here, I use one of them every day for my Spirit and my Tank007 led light when I go to work. I tried my Rebar and my MAG-lite Solitaire Led in one of them and they do fit, be it a bit loose (the Rebar), but thanks to the velcro you can make it fit a bit tighter, so I guess my problem is solved, but ... I would really like a leather sheath for my Rebar (I know, I know ... ::)).
I think I'm just going to get me one of those Leather Wave sheaths and see how it holds my Rebar, if it turns out it's to loose (because of the snap closure you can't tighten it like you can with the velcro) then I will have an extra sheath for my Wave or Charge TTi ;).
-
-
-
Love the pics TG. And you're right, the classic LM style makes for some great pics. That sheath looks nice too. So is this Rebar working better than the last couple you tried?
-
I have re-added my REBAR to the EDC rotation. I've had several situations where I needed either a good pair of wire snips or a full set of pliers. It's just too useful not to carry it. So now, I will pull my pants up every few minutes

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





