Whats the hook for?
-
@Jothra said:
If you find a short enough sewimg needle (easy!), and wrap it all over with thread until you have a bundle just big enough to keep it from falling out when the hook is opened, it fits under the hook without affecting any of your tools. This has been a minor life-saver on more than one occasion.Off topic but useful. I stopped carrying the thread and needle under the hook, because I realized that it is far better to keep a sewing kit (from a hotel) under the belt strap of my SAK's seath. I never put the seath in my belt, I only use the seath for protection. In fact I keep 2 pieces of thread (black and white), two jumbo needles (one straight and one with curved tip, useful for SAK joint cleaning on the go among other things, such as knot untying and ecig hole cleaning), three curved surgical needles (better handling in the field than the usual tiny needles) and two hansaplast strips (where is a knife there are cuts).
So my hook is free again to fulfill its many tasks. -
@kkokkolis said:
Off topic but useful. I stopped carrying the thread and needle under the hook, because I realized that it is far better to keep a sewing kit (from a hotel) under the belt strap of my SAK's seath. I never put the seath in my belt, I only use the seath for protection. In fact I keep 2 pieces of thread (black and white), two jumbo needles (one straight and one with curved tip, useful for SAK joint cleaning on the go among other things, such as knot untying and ecig hole cleaning), three curved surgical needles (better handling in the field than the usual tiny needles) and two hansaplast strips (where is a knife there are cuts).
So my hook is free again to fulfill its many tasks.Economy of space is more or less on-topic. Nice idea with the belt loop, and way to keep the hook clear.
-
Every day we have to fill up the waterer in our chicken coop... a three-gallon cylinder with a wire bail handle. When filled, it weighs close to 25 pounds, and that wire handle really cuts into the hand. The hook makes the walk back to the coop from the hose much more comfortable.
-
Yes, it is the same with oil tins here. They weight a full 17kgr and the handle is a simple slippery wire.
-
New to the forum, and this is my first post. I carry a Champ with me everywhere, and by attaching a line to the keyring and opening the hook all the way, it becomes a decent grappling hook. For bowhunting, I have a paracord loop tied to my bow, so I can snag it and pull it up to my treestand rather than climb up a tree carrying it.
-
@mikeells said:
New to the forum, and this is my first post. I carry a Champ with me everywhere, and by attaching a line to the keyring and opening the hook all the way, it becomes a decent grappling hook. For bowhunting, I have a paracord loop tied to my bow, so I can snag it and pull it up to my treestand rather than climb up a tree carrying it.That's way more exciting than the usual Hook My Dropped Keys gambit.
-
Hi gang,
I know it has been mentioned multiple times already in this thread, but here is a Pen/ Parcel Hook video demonstration. -
I saw some pictures...was it on SOSAK?..of a hook with a sharpened side for firesteel striking.
Ah, it was on SOSAK, written by Tom Whisenhunt, but I don't think it's made it over to Swiss Army Knights yet. Here's the (unfortunately) picture-free Wayback Machine version:
http://web.archive.org/web/20090213080650/http://www.sosakonline.com/index.php?option=com_content&task=view&id=415&Itemid=35A small section of the hook was ground to a 45 degree angle, or close to it, so the newly sharpened edge could be used on ferro rods, saving the main blade for other pursuits. Reportedly, it worked well.
My Google Image-Fu is usually pretty strong, but I can't find this one. Sorry.
-
What a good thread. I didn't know there were so many uses for the hook. No wonder Victorinox continues to include them in the tool selection.
-
firiki suggested I list the uses I've recently found for the hook here. Why not? I'm not going to show all the pictures here, but I will throw in links to the relevant posts.
I used it for tightening my workboots here.
One time it yanked tie wire from anchor bolts.
This is sort of like cross-stitch, I guess? I dunno. Arts and crafts, anyway.
Here's a hook cleaning garbage wood from a notch cut into some plywood.
Bend those nails! Well, okay, the hook never bent any nails. They were deck screws.
Removing tie wire from some rebar nearly turned out poorly. This twisted my hook a little, but it got the job done, and I fixed the hook.
Keeping my hands clean while removing a bike chain, and using the hook as a bit driver for Leatherman flat-bits (thanks for the tip, Xelkos!)Also, yesterday I used the hook to get under and remove the rubber band thing holding my old bike bell on. I replaced it with a smaller bell.
-
-
@Jothra said:
I saw some pictures...was it on SOSAK?..of a hook with a sharpened side for firesteel striking.Ah, it was on SOSAK, written by Tom Whisenhunt, but I don't think it's made it over to Swiss Army Knights yet. Here's the (unfortunately) picture-free Wayback Machine version:
http://web.archive.org/web/20090213080650/http://www.sosakonline.com/index.php?option=com_content&task=view&id=415&Itemid=35A small section of the hook was ground to a 45 degree angle, or close to it, so the newly sharpened edge could be used on ferro rods, saving the main blade for other pursuits. Reportedly, it worked well.
My Google Image-Fu is usually pretty strong, but I can't find this one. Sorry.
There's plenty of edges on a SAK you can use to strike a ferro rod without having to mod any of it. I'd sugest try this before starting grindind the hook, one slip of the hand and you might damage it.
(I'm thinking about my own skills or lack there of...)
:D -
If you find a short enough sewimg needle (easy!), and wrap it all over with thread until you have a bundle just big enough to keep it from falling out when the hook is opened, it fits under the hook without affecting any of your tools. This has been a minor life-saver on more than one occasion.
Off topic but useful. I stopped carrying the thread and needle under the hook, because I realized that it is far better to keep a sewing kit (from a hotel) under the belt strap of my SAK's seath. I never put the seath in my belt, I only use the seath for protection. In fact I keep 2 pieces of thread (black and white), two jumbo needles (one straight and one with curved tip, useful for SAK joint cleaning on the go among other things, such as knot untying and ecig hole cleaning), three curved surgical needles (better handling in the field than the usual tiny needles) and two hansaplast strips (where is a knife there are cuts).
So my hook is free again to fulfill its many tasks.I have a couple of SAKs with the corkscrew. In these models, the scale beneath the corkscrew has a little hole. In the Compact, it comes with a pin inserted. In other models, you can put a needle inside with some thread wrapped around its end (creating sort of a pin-head). It gives you a safe way of transporting it, it's harder to lose than just having the same needle under the hook.
-
@pfrsantos said:
I have a couple of SAKs with the corkscrew. In these models, the scale beneath the corkscrew has a little hole. In the Compact, it comes with a pin inserted. In other models, you can put a needle inside with some thread wrapped around its end (creating sort of a pin-head). It gives you a safe way of transporting it, it's harder to lose than just having the same needle under the hook.If you wrap the right amount of thread, the needle won't fall out, and you get both a needle and thread and a straight pin. I like having both. I also can't usually easily remove a needle and thread from under an open hook even by turning the whole tool upside-down and shaking it. Instead, I'll have to pry an end out with the toothpick or tweezers (or the straight pin!) The only thing to remember is to stop wrapping thread before you add too much bulk for the hook to close properly.
-
Nice point. I'll have to try it out.

-
I have a couple of SAKs with the corkscrew. In these models, the scale beneath the corkscrew has a little hole. In the Compact, it comes with a pin inserted. In other models, you can put a needle inside with some thread wrapped around its end (creating sort of a pin-head). It gives you a safe way of transporting it, it's harder to lose than just having the same needle under the hook.
If you wrap the right amount of thread, the needle won't fall out, and you get both a needle and thread and a straight pin. I like having both. I also can't usually easily remove a needle and thread from under an open hook even by turning the whole tool upside-down and shaking it. Instead, I'll have to pry an end out with the toothpick or tweezers (or the straight pin!) The only thing to remember is to stop wrapping thread before you add too much bulk for the hook to close properly.
Which all seems fine until you actually use it, and then there's not enough thread to hold it in again afterwards
:D :DJust being an arse ;)
-
@50ft-trad said:
Which all seems fine until you actually use it, and then there's not enough thread to hold it in again afterwards
:D :DJust being an arse ;)
That is absolutely true (the pin part, not the arse part)—but when you have five minutes to sew the back of your pants up before recess is over, you don't stop to worry about how well your needle fits under your hook. Well, I didn't. That class still talks about it, and I haven't seen them in a year.
Like most weird SAK tricks, it's really the world's most opinioney opinion call. My SAK also has a small firesteel, tinder, a sharpening rod, and several glasses screws secreted throughout. I may be a tad biased about cramming stuff into weird places in SAKs.
-
@Jothra said:
My SAK also has a small firesteel, tinder, a sharpening rod, and several glasses screws secreted throughout. I may be a tad biased about cramming stuff into weird places in SAKs.Jothra,
Would you mind sharing a quick picture of the SAK that has the firesteel attached? Is it similar to the one that was made by SwissBianco sometime ago?

In light of firesteel and SAK/MT, I did put out a video about that just a day or two ago. :)
</topic/46954 -
I was thinking about this problem and had an idea. Must try it to see if it works, though. Get a thin plastic straw and cut it to fit under the hook. Put the threaded needle inside. f you use the thread, you still have the same bulk from the straw, it won't fall out so easily.
What do you think?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
