Car boot finds
-
Thanks for that, I was looking at trying to replace the cells in the batteries but I'm not sure how successful I would be or if I would just waste my money trying

-
Today's finds. Apparently they belonged to his FIL. I am going to guess he was in the army in 1944. Both are in very good/ excellent condition. Now if only I could remember who was asking for an egg beater drill last time we had a meet.

-
Nice haul! I really like the pipetool.
sent from Ducttapetech's mobile device
Its a cute little thing and in surprisingly good condition, the blade has not been used as a screw driver, the pokie tool is straight and not been poked somewhere it shouldn't

And a nice thing about being so small is that the "hammer" side doesn't look to be all mashed over from heavy pounding. :)
I would never do that!

In my defense, if you are laying on your back under a bath squeezed in next to a toilet, it would be a bit silly to squeeze back out for a hammer when you have 2lbs of Sheffield steel in your hand :D
I think there was a tiny bit of confusion :ahhh
Ducttapetech was talking about the pipe smokers penknife not the tiny pipewrench
but everything is clear to me now
:D -
great day at the flea market.. despite the migraine.
a juice c2,skeletool cx, b&h gak, and a zippo tape measure that looks nib

-
Those are nice Mark, I have never seen Army issue 'footprints' before :o
Nice score's Blitzwing, that Zippo rule is

-
Too much heavy metal :D my bag broke :ahhh I had to buy the blue bag just to carry it all home ::)
Mainly
A little penknife with ERN on the main blade
Multimaster by KUTMASTER USA :o :o :o
and what I'm hoping is something like a 'Navy knife'? I cant even open the blade yet

-
My new blue bag disintegrated in the washing machine this afternoon during a hot wash

I paid more than I wanted to for the billhook / slasher but it was made by Elwel so I'm happy now :)
The folding knife once cleaned of putty is a 1971 Joseph Rodgers & Sons, Post Office cable jointer's knife
This thing is huge :o the handle is 5” long, the cable jointer would 'baton' the knife through the lead sheath of the cable (I had to remove a little burr from the back of this one) an indestructible folding knife :DA bit more about them in this thread
http://www.britishblades.com/forums/showthread.php?71767-Lonely-Hearts-GPO-postal-clasp-knife-seeks-similar-object-collection&s=d681c675744bce4ab75f1b575c7eef17
-
Interesting to see they used almost the same style knife with only slight variations for four decades. The earliest from that thread being '36. Looks like a great solid knife.

-
Well hang on here, are you saying you actually brought a multitool home from a car boot sale?!? :o :ahhh
Has that ever happened before? :D
-
@J-sews said:
Well hang on here, are you saying you actually brought a multitool home from a car boot sale?!? :o :ahhhHas that ever happened before? :D
I think its only happened once or twice before Bob, (its too early to look back)
Its a Multimaster (I was surprised that its made in the USA) Comes with screwdriver bits that fit in the end of 'square ' handle and its nice and sharp
Needs a drop of oil and a clean ;) -
@Farmman said:
Today's finds. Apparently they belonged to his FIL. I am going to guess he was in the army in 1944. Both are in very good/ excellent condition. Now if only I could remember who was asking for an egg beater drill last time we had a meet.Just noticed this. :-[ I picked up an eggbeater drill at the last meet, is that what you are thinking of? It's see quite a bit of use as well. 8)
-
Thought someone else also wanted on. Never mind I am sure it will come in.
-
Well hang on here, are you saying you actually brought a multitool home from a car boot sale?!? :o :ahhh
Has that ever happened before? :D
I think its only happened once or twice before Bob, (its too early to look back)
Its a Multimaster (I was surprised that its made in the USA) Comes with screwdriver bits that fit in the end of 'square ' handle and its nice and sharp
Needs a drop of oil and a clean ;)I seem to remember a Sideclip for 5 quid.

-
Ah yes, I recall that one too now that you mention it.

The Multimaster is a decent enough tool Tony, although the design is a tad dated. Best thing about it (especially in the case of yours there with a bit of rust) is that the whole things comes apart rather easily. :)
-
@J-sews said:
Ah yes, I recall that one too now that you mention it.
The Multimaster is a decent enough tool Tony, although the design is a tad dated. Best thing about it (especially in the case of yours there with a bit of rust) is that the whole things comes apart rather easily. :)
It does seem like a useful tool, I will put it in the 'to be oiled' pile

::) I've just spent two hours looking back through a lot of rust and found.....
Sideclip 30th june 2013
Supertool 31st july 2011
:D

-
Nice haul there Tony!
-
Ah yes, I recall that one too now that you mention it.

The Multimaster is a decent enough tool Tony, although the design is a tad dated. Best thing about it (especially in the case of yours there with a bit of rust) is that the whole things comes apart rather easily. :)
It does seem like a useful tool, I will put it in the 'to be oiled' pile

::) I've just spent two hours looking back through a lot of rust and found.....
Sideclip 30th june 2013
Supertool 31st july 2011
:D

Ah, so three multis now in the three years since you started this thread, very good!
:D -
Ah yes, I recall that one too now that you mention it.

The Multimaster is a decent enough tool Tony, although the design is a tad dated. Best thing about it (especially in the case of yours there with a bit of rust) is that the whole things comes apart rather easily. :)
It does seem like a useful tool, I will put it in the 'to be oiled' pile

::) I've just spent two hours looking back through a lot of rust and found.....
Sideclip 30th june 2013
Supertool 31st july 2011
:D

Ah, so three multis now in the three years since you started this thread, very good!
:DYep three Multitools
but have you seen how much smurf I've bought since I've joined this forum??? :o
You lot are a bad influence -
Ah yes, I recall that one too now that you mention it.

The Multimaster is a decent enough tool Tony, although the design is a tad dated. Best thing about it (especially in the case of yours there with a bit of rust) is that the whole things comes apart rather easily. :)
It does seem like a useful tool, I will put it in the 'to be oiled' pile

::) I've just spent two hours looking back through a lot of rust and found.....
Sideclip 30th june 2013
Supertool 31st july 2011
:D

Ah, so three multis now in the three years since you started this thread, very good!
:DYep three Multitools
but have you seen how much smurf I've bought since I've joined this forum??? :o
You lot are a bad influenceWe lot?! ::) You should see how much rusty metal I've dragged home since you've started this thread.
:D -
Mike started it with his talk of Axes

Then I discovered the power of vinegar >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login