What did you use your Leatherman for today?
-
@Bensasupertool said:
Is that a digicam tie? looks coolWhat's a digicam tie? The lanyard? If so, I've heard it called a crown sinnet or box knot.
-
@Dr. Bahn said:
@Dr. Bahn said:
@ Monrogue and captain spaulding: Why so less love for spiders? They are very useful little ,(sometimes) fast running and creepy-crawly creatures. :D
Today I used my Pulse (scissors and smallest screwdriver) to repair the lint brush of my gf.
Well my wife is afraid of them, so any she sees are sentenced to death and I get to carry it out. I will say I can be more merciful as sometimes I see one and leave it be, but I'm usually busy and can't be bothered to take care of it. They can be useful for removing other insects, but still not a big fan of them.
Sent from my XT901 using Tapatalk 2
My gf is the same but I always rescue them. ;)
Here's something for you Dr. Bahn ;)
https://www.facebook.com/photo.php?fbid=545263838873591&set=a.312856525447658.72940.312667762133201&type=1&relevant_count=1&ref=nf -
Is that a digicam tie? looks cool
What's a digicam tie? The lanyard? If so, I've heard it called a crown sinnet or box knot.
Yeah the lanyard its not what I thought it was. I tied a Digicam Bar that looks similar to what you did. What you made looks very neat and uniform. Theres a picture of the digicam bar in the got paracord thread. Its blue and yellow.
-
@Bensasupertool said:
Yeah the lanyard its not what I thought it was. I tied a Digicam Bar that looks similar to what you did. What you made looks very neat and uniform. Theres a picture of the digicam bar in the got paracord thread. Its blue and yellow.I just looked it up on YouTube at TIAT. Pretty cool!¡! That crown sinnet is very tight but there are some mistakes I made in the weaving like not paying attention to the cord being twisted in a spot or two. I don't like how I started this one and discovered a better way (I think) to start it with a two strand diamond knot. I've made several since this one that way and really like the way they've turned out.

-
@Dr. Bahn said:
@Dr. Bahn said:
@ Monrogue and captain spaulding: Why so less love for spiders? They are very useful little ,(sometimes) fast running and creepy-crawly creatures. :D
Today I used my Pulse (scissors and smallest screwdriver) to repair the lint brush of my gf.
Well my wife is afraid of them, so any she sees are sentenced to death and I get to carry it out. I will say I can be more merciful as sometimes I see one and leave it be, but I'm usually busy and can't be bothered to take care of it. They can be useful for removing other insects, but still not a big fan of them.
Sent from my XT901 using Tapatalk 2
My gf is the same but I always rescue them. ;)
Here's something for you Dr. Bahn ;)
https://www.facebook.com/photo.php?fbid=545263838873591&set=a.312856525447658.72940.312667762133201&type=1&relevant_count=1&ref=nfThat is a good one! :D
I seriously like spiders very much as longs as they stay out of my bed and cloths. When I was a child I used to keep a female cross spider in one corner of my room and caught flies for her every day. Funnily enough, I called her "Rudi" which is actually a male name. :DBTT: Yesterday I repaired an earing of my gf. I held the pin with the pliers while glueing the gem to it. :)
-
Used my PST in an attempt to clean out a bad jam in our shredder at work. An inexperienced person was using it and forced too much paper into it. Jammed it up solid. I did what I could, but to no avail.
Sent from my XT901 using Tapatalk 2
-
No LM use for me today

-
Oh man, today was a banner day for multi tool use. We have our two biggest CNC lathes down since our move due to various issues. Not being CNC technicians, my fellow crew leads and I have been largely unsuccessful in making much progress, mainly because we keep trying to let our newer guys do simple things like put covers back on. One of them crushed an entire wire harness doing this, and blew out a proximity sensor. We got a technician in yesterday, and he managed to make things worse. So I decided to hit the books and figure this crap out.
My pulse saw so much use today it had to be cleaned, many times.
On our newer lathe, the tool turret wasn't indexing. My pulse pliers got used to undo terminals to check connections, cut wire, open packages for new parts, unscrew covers and caps to get at components in the turret, and pull chips out of the cable carrier system(had to tear that apart to get them all out).
Ended up having to replace a single wire that ran from the turret position encoder to the controller. One machine up and running.
The other one WAS working when Mr. Tech showed up, but he managed to give it the same symptoms as the newer one, which boggled my mind. After about two hours of poring over manuals that were mainly written in portuguese and poorly translated english, a lightbulb came on in my head and I fixed that machine on my own, and he tried to take credit for it.
So after all that, our best machine decided the chip conveyor was gonna jam, and my pulse got to pull all the chip stringers that had wrapped themselves around the motor shaft.
It's been a long day and out of the two machines I was able to get one running normally and the other running sort of normally, with a few small tweaks needed tomorrow.
-
Hey nice job there Mercury, and props to your Pulse for being a good helper

-
Used my TTi to fix a zipper. Overkill, but the results were on par
Sent from my SPH-L720 using Tapatalk 2
-
Well nothing too exciting this weekend. I used it mostly for cutting 8 gauge aluminum wire which I used for my gutter (leaf) guards. I used the HD aluminum clip on guards. I overlapped them 1/4" and wired them together. Then I used another piece of wire at each end twisted thru the brace and the same thru every third section. The wire blends in perfectly and you pretty much have one solid huricanr proof unit. Some guys have even used one self tapping screw in between the clips of each section further anchoring iy to the gutter. :-)
Sent from my SCH-I605 using Tapatalk 2
-
Used my Wave to remove some rusty staples I noticed on a park bench I was sitting on. Hopefully avoided some people getting tetanus.
-
Nothing so far today, but yesterday my SuperTool help pull up some very old glued-down carpet.
-
Wasp pincher

-
Used the saw on my Rebar to cut a few pieces of wood.
-
Unfortunately I was in an motorcycle accident last night, when a woman decided to stop her car, in the right lane on the LIE, a main highway here in NY. I was about three car lengths away and couldn't avoid her so I had to lock it up and hold on and slid into her rear end. Anyway, after being banged up and getting some road rash I had to tighten the mirrors on the bike as well as the floor boards so I could ride it away. Just as I finished the police officer who took the report walked over to give me a copy and told me i had a piece of glass embedded in my left tricep, so I pulled it out with the pliers. Anyway used my Super Tool 300 to accomplish all this.
-
My task isn't anywhere near as macho as pulling glass from my arm after a motorcycle accident, yikes, glad you're OK Joey

Used my Crunch to change the battery in my car


-
I used the combo blade of my PST II to open the wrapping of our new mattress. Other than that I looked and opened/closed it many times and thought how cool this tool is. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login