Vic Ranger Owner's Club
-
Nice Ranger Firiki
I've never heard of or considered the weight to be a factor in its cutting capacity, but perhaps it is? I really wouldn't know...interesting question though 
Thanks Mon. I really love red nylon scales so it just made sense I ahem modded
my beater Ranger. Now, to find out more about weight affecting blade efficiency...I've never handled the nylon scales, but I also seem to remember not hearing a lot of positivity towards them (not all necessarily from this site) in various reviews. Well your mod job looks fine to me
I'm curious about the weight thing, you'll have to keep my posted. The Ranger is the heaviest SAK I have, but only by .1oz, so nothing to get used to. My two customs are 4.0oz and 4.1oz, so the Ranger at 4.2oz isn't bad. -
Right now in a pouch on my right hip is my Ranger, I really like this SAK.
Overall I think that my Cybertool is better when I'm working on computers, but I'm no longer working as a computer technician so my Cybertool is sitting on my computer desk very close to where I am right now.The Ranger has a really good mix of tools including a file which is a lot more useful than many realise - need to grind a little plastic/wood/metal to make something fit better? Yeah, the Ranger can handle that.
Going camping? Take the Vic Ranger and you will be well covered for useful tools!The size of the Ranger is no biggie to me, in fact it is noticeably slimmer & lighter than my Cybertool. In a pouch I don't even find my SwissTool X to be too heavy or big.
-
@KiwiMark said:
Right now in a pouch on my right hip is my Ranger, I really like this SAK.
Overall I think that my Cybertool is better when I'm working on computers, but I'm no longer working as a computer technician so my Cybertool is sitting on my computer desk very close to where I am right now.The Ranger has a really good mix of tools including a file which is a lot more useful than many realise - need to grind a little plastic/wood/metal to make something fit better? Yeah, the Ranger can handle that.
Going camping? Take the Vic Ranger and you will be well covered for useful tools!The size of the Ranger is no biggie to me, in fact it is noticeably slimmer & lighter than my Cybertool. In a pouch I don't even find my SwissTool X to be too heavy or big.
Welcome to the club KiwiMark
I agree, the Ranger is pretty well equipped without being overly bulky/heavy
Got any pics? 
-
-
So?

-
-
@Monrogue said:
I've never handled the nylon scales, but I also seem to remember not hearing a lot of positivity towards them (not all necessarily from this site) in various reviews. Well your mod job looks fine to me
I'm curious about the weight thing, you'll have to keep my posted.I'll need to do some serious search on the weight thing but I'm curious as well, so I'll let you know, no problem

As per nylon scales, I am aware that not many people like them and I understand that; they feel cheap compared to cellidor or alox ones. Me, I really dig how they are grippier* and tougher than cellidor and that deep red looks great to me.
*I tend to have sweaty hands at times and it's really annoying
, hence my appreciation for those scales. 
-
I've never handled the nylon scales, but I also seem to remember not hearing a lot of positivity towards them (not all necessarily from this site) in various reviews. Well your mod job looks fine to me
I'm curious about the weight thing, you'll have to keep my posted.I'll need to do some serious search on the weight thing but I'm curious as well, so I'll let you know, no problem

As per nylon scales, I am aware that not many people like them and I understand that; they feel cheap compared to cellidor or alox ones. Me, I really dig how they are grippier* and tougher than cellidor and that deep red looks great to me.
*I tend to have sweaty hands at times and it's really annoying
, hence my appreciation for those scales. 
I've heard the nylon is grippier as you said, which I would like too. I would also like the fact they're tougher as cellidor does seem to scratch easily. I remember when I still had my black Explorer, my wife knocked it off the kitchen counter (
) and it got a noticeable dig on the back scale. It almost looked like it had landed directly on a tiny pebble and embedded into it. It was only like a 3-4 foot drop, so it seemed a bit much to me. -
-
-
@Monrogue said:
I've heard the nylon is grippier as you said, which I would like too. I would also like the fact they're tougher as cellidor does seem to scratch easily. I remember when I still had my black Explorer, my wife knocked it off the kitchen counter (
) and it got a noticeable dig on the back scale. It almost looked like it had landed directly on a tiny pebble and embedded into it. It was only like a 3-4 foot drop, so it seemed a bit much to me.They are much grippier. Someone in these forums (don't remember who ATM) also said that you can even enhance that effect by using sandpaper on them but I haven't tried that. I think you should give them a try. Cellidor can take some beating but it does tend to lose entire bits when dropped. This makes me anxious when using my Vic Handyman that wears cellidor, being anxious makes my hands sweat, which brings us back to nylon

@Nhoj said:
you can harvest the metal cross from cellidor scales and inlay it into the nylon.That sounds interesting. How do you do that, please?
-
I've heard the nylon is grippier as you said, which I would like too. I would also like the fact they're tougher as cellidor does seem to scratch easily. I remember when I still had my black Explorer, my wife knocked it off the kitchen counter (
) and it got a noticeable dig on the back scale. It almost looked like it had landed directly on a tiny pebble and embedded into it. It was only like a 3-4 foot drop, so it seemed a bit much to me.They are much grippier. Someone in these forums (don't remember who ATM) also said that you can even enhance that effect by using sandpaper on them but I haven't tried that. I think you should give them a try. Cellidor can take some beating but it does tend to lose entire bits when dropped. This makes me anxious when using my Vic Handyman that wears cellidor, being anxious makes my hands sweat, which brings us back to nylon

@Nhoj said:
you can harvest the metal cross from cellidor scales and inlay it into the nylon.That sounds interesting. How do you do that, please?
Yeah, I may have to consider them, but I'm not an experienced scale changer, so I don't know. I don't think many models come equipped with them either, if I remember correctly. Yeah, I am curious how one can take the metal cross from one scale and inlay it into another

-
I don't have a Ranger. The nearest I have is an Original Outdoorsman (two actually :D) and I have found the pruner and serrated blades to be incredibly useful at times (fibrous materials and opening clam packs are good examples)
-
@50ft-trad said:
I don't have a Ranger. The nearest I have is an Original Outdoorsman (two actually :D) and I have found the pruner and serrated blades to be incredibly useful at times (fibrous materials and opening clam packs are good examples)Oh that's fairly close to a Ranger though, and very cool

-
@50ft-trad said:
I don't have a Ranger. The nearest I have is an Original Outdoorsman (two actually :D) and I have found the pruner and serrated blades to be incredibly useful at times (fibrous materials and opening clam packs are good examples)Clamshell packaging is pretty easy to open with any SAK blade - as long as you keep them sharp.
In fact I very rarely find myself wanting serrated blades because I keep my plain-edge blades sharp enough to allow them to do the same jobs easily. Even in the kitchen I can't remember the last time I used a serrated blade.
My most used kitchen knife: http://www.victorinox.com/ch/product/Cutlery/Category/Household-knives/Paring-knives/SwissClassic-Paring-knife-10-cm/6.7703One thing I like about most SAKs, including the Ranger is that there is 2 blades, if one is getting blunt I can switch to the other and then sharpen both when I get home.
I also like how easy they are to sharpen. -
@Monrogue said:
cellidor does seem to scratch easily. I remember when I still had my black Explorer, my wife knocked it off the kitchen counter (
) and it got a noticeable dig on the back scale. It almost looked like it had landed directly on a tiny pebble and embedded into it. It was only like a 3-4 foot drop, so it seemed a bit much to me.I can't be the only one that doesn't mind, or even prefers to see scale damage.
I think of SAKs as useful tools and signs of wear on the scales show a tool that has actually been used.
My Cybertool 34 has various scratches on its scales, these are badges of honour that celebrate 13 years of EDC, they are a good thing!
Nylon scales for better grip is one thing, but never be afraid to get your cellidor scales scratched! -
cellidor does seem to scratch easily. I remember when I still had my black Explorer, my wife knocked it off the kitchen counter (
) and it got a noticeable dig on the back scale. It almost looked like it had landed directly on a tiny pebble and embedded into it. It was only like a 3-4 foot drop, so it seemed a bit much to me.I can't be the only one that doesn't mind, or even prefers to see scale damage.
I think of SAKs as useful tools and signs of wear on the scales show a tool that has actually been used.
My Cybertool 34 has various scratches on its scales, these are badges of honour that celebrate 13 years of EDC, they are a good thing!
Nylon scales for better grip is one thing, but never be afraid to get your cellidor scales scratched!Oh don't get me wrong, scratches and whatnot from EDC use is cool with me, just not if the scales are dented or cracked too easily. Or if someone's negligence results in damage (like what happened in my story above). I'm sure they don't crack or break that easily, so I'm not really worried about it, especially since I don't do anything too heavy with them. I just have to be careful not to drop them (which I'm very careful not to do ;))
-
-
@slackard said:
so ah.. sign me up.. decided this Ranger is my new workhorse. Mooring the aging Climber II ('rostfrei' hilt stamp) into the ghost fleet pier, to be called upon only at the end of the most dire times of need.
Oh hey, fancy meeting you here
The Ranger definitely seems like a workhorse SAK 
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login