Adding a ruler on SAKs?
-
You could use a carbide scribe to scratch in the numbers and lines. Then use a sharpie to darken them. Wash off the remaining sharpie and the letters numbers and lines will still be dark for some time. Try it :)
-
What about marking the main blade?
-
I would suggest to just add a SOS kit Ruler/ Compass/ Thermometer to the kit. It is a nice gadget, with more functions and transparent (useful with measurements).
-
@kkokkolis said:
I would suggest to just add a SOS kit Ruler/ Compass/ Thermometer to the kit. It is a nice gadget, with more functions and transparent (useful with measurements).Well, yes, it is useful but my point is to add a feature on the knife itself (and have a little fun in the process ;) ).
-
I like the idea of engraving a ruler on the saw, i was going to engrave my sak and might add that feature. Also its good that the saw is the largest blade on my wenger. Thanks for the idea

Could be mm for one side of the saw and inches on the other. I dont know how dificult or costly to do that with precision that could be though, maybe pasting a paper ruler and cut each mm on it marking the saw?
-
You can also add a keychain ruler tape...

Or substitute one layer with a folding ruler

You can even mod the folding ruler as a wire stripper too

-
Those look quite handy. Now to try and get a pair in the UK.
-

Those look quite handy. Now to try and get a pair in the UK.
Currently out of stock though but they'll hopefully restock soon.
http://www.heinnie.com/Multi-Tool-Spares-Wirestripper/p-0-0-7779/
Or you might try asking in the tools needed subforum. Maybe a member has a spare one.
-
@tattoosteve99 said:
You could use a carbide scribe to scratch in the numbers and lines. Then use a sharpie to darken them. Wash off the remaining sharpie and the letters numbers and lines will still be dark for some time. Try it :)Sorry for the late reponse and thank you. This probably is the best option. I still haven't found a carbide scribe in a shop so I'll have to search the net. Once it's done I'll post pics.

@stealth007s said:
What about marking the main blade?I'm starting to like that idea, you know.

-
I wonder if using 1/8" aircraft plywood, laser cut and etched with a ruler...
Anyone have a digital file of a SAK scale?
-
How about this? Don't know how long they last...
http://toolguyd.com/cardstick-stickers-turn-your-credit-card-into-a-ruler/
-
@pfrsantos said:
How about this? Don't know how long they last...http://toolguyd.com/cardstick-stickers-turn-your-credit-card-into-a-ruler/
I think that it wouldn't last long on a working saw ;) Thank you for the suggestion anyhow.
I finally got a scriber, branded ECLIPSE, ENGLAND. I gave it a try or two, it kept sliding off the saw's surface. It won't work for this job, it seems. Good news is I can now stop ruining my flat screwdrivers and knife tips trying to mark my gear. I like leaving a discreet mark on my gear. Next step, put a ruler on the scales. >:D I'll update eventually. Cheers

-
Surely there has to be a "peel and stick" metric or imperial scale out there. Probably wouldn't work on a tool that experiences a lot of pulling-pushing motion though, it'd just get messed up.
-
How about this? Don't know how long they last...
http://toolguyd.com/cardstick-stickers-turn-your-credit-card-into-a-ruler/
I think that it wouldn't last long on a working saw ;) Thank you for the suggestion anyhow.
The idea was to put it on the scales.
-
...Maybe give Mr Slackard a shout to see if he can magic up a set of scales while hes in the planning stage of his project?
</post/776912>
-
Yes - It should be easy to incorporate that in teh existing design, me thinks.
And I am still sure there was a thread were soemone lasered Logos and a ruler in 91 mm scales. Although I was browsing old Mod threads looking for it, I could not find it - But found othhr interesting threads that gave me Ideas.... ::) -
i have absolutely no business putting my 1/2 cent in but what about a dremel or similar type machine and engrave it? this may have been suggested but i may have missed it. interesting to see what comes about though. also ive seen some great file work here on the blades of MTs what about file the lines in the saw blade?
ok im going now as i just read and saw where OP said no tool so conventional mean only for now.
still watching ;)
-
Look here, reply #631
</topic/5287
-
thanks and i should have figured with all the talent here that was already done. awesome job on that engraving wow.
-
How about this? Don't know how long they last...
http://toolguyd.com/cardstick-stickers-turn-your-credit-card-into-a-ruler/
I think that it wouldn't last long on a working saw ;) Thank you for the suggestion anyhow.
The idea was to put it on the scales.
I tend to be a little absent-minded at times so I didn't get that, sorry.@lowtech said:
Look here, reply #631</topic/5287
That's exactly where I got the idea! My reaction was something like "wow, that's cool. The scales job is fairly easy and since I don't use a fish scaler I could add a ruler on the saw to further enhance this function". ;)
@sparky415 said:
...Maybe give Mr Slackard a shout to see if he can magic up a set of scales while hes in the planning stage of his project?
</post/776912>
Did I say I'm a little absent-minded at times? I didn't even think about that. Good idea, I'll just go over there and leave a post.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


