DIY Canvas Micarta
-
It's going to be very cool when you get it working!

-
These are progress pictures, There is still one process to go but as I'm making it up as I go along with salvaging these scales I could wreck them at any time so unfinished photos are better than none.
If the next step works (clear coat over the resin) I will post some completed shots. But here is the state of play at the moment.



Being a Recruit it gets to go in my Recruit Parade, but I'm sure it would get kicked out for turning up to parade dressed like that.
-
Looks pretty cool to me!
-
Thats great Peter

-
The top 4 or 6 layers in each blank have the image printed in them so there is room for sanding without losing the print.
Great idea!

I've been slightly let down by technology there... I printed these on a colour Laser printer and the image sits on the top of the paper. When you sand it the toner sands away and leaves bare paper before you get to the next image. Should have done them on an inkjet printer set for coated paper and let the ink soak into the paper. Never mind, the second set are salvageable and I know how I can use the other sets of prints that I have sitting here.
I saw this post and the idea a creating my own images to use in my scales is great. One thing I'd like to know: you mention the last layers having the same image. So, you have the same image printed in several pieces of paper and you put the resin over one and then put the other print over, aligned, is that it?
With the epoxy over the image, isn't it very hard to perfectly align the images so that if you remove too much of one layer the underlying layer image is perfectly aligned? Just 1mm to the side and you can ruin the whole scale.
How do you make sure the alignment is... well, aligned?!...
??? -
I left the paper a couple of inches longer than needed and after lining the layers up dry I stapled them together.
-
If I understand correctly, you line all the images directly after printing and staple them toghether and only after that you start using the resin on them, is that it? Sorry for all the questions, I'm trying to get a very detailed idea of the process. I'm not the most skilled person, it's easier for me to mess something up than to make it right the first time I try it...
:-\
-
yes, get the images lined up first and stapled, then flip through the "pages" of the little book you have made brushing or squeegeeing the resin between the sheets.
Once you have it all wetted out with resin, put it between a couple of sheets of plastic (I use a large zip lock bag.) and clamp or weight it to squeeze out the excess resin.
Be careful at this point that you don't slide the free end of the sheets around and miss-align the images. -
Thanks, I thought it would be like that but wanted to make sure. That's a great way to personalize any tool. I'll be looking for some cool images to create some scales.
8)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



