Wave or Supertool?
-
Actually, the Wave isn't that much bigger than a Rebar, mainly just a different design.
Seeing you want a bigger tool, I agree with the people calling out the Surge. It's larger, has the outside opening tools, -and- the adapter you like about the Wave, plus the Blade exchanger, making it possible to switch sawblades. I will advise you to wait for the updated Surge to come out, though, as it has a fix that makes the blade exchanger better for after-market blades, and it has the ST300-plierhead ;)
-
I love my wave so I am biased but that being said, in another thread you mentioned you had a swisstool? might I suggest get a wave and use your swisstool instead of getting a LMST300? the outside accessible tools and the blunt(ish) plier head seem unstoppable. not sure if you would use the wire cutters so that may be a deal breaker.
so my humble suggestion is to get a wave and some bits and use your currently held swisstool.
-
If I had to choose between the ST300 or the Wave, the Supertool always wins, I like the old style screwdrivers, the simplicity of the design, the fact that it's a beefy tool and last but not least, the plierhead.
Now, since you already own a Rebar, buying the ST300 would mean that you're buying another Rebar, but this time the X-large version. On the other hand, if you want a larger tool than your Rebar, you would have to get the ST300, because the Wave is exact the same size as the Rebar (in length that is, the Wave is a bit thicker and with the OHO tools on the outside, the Wave is also a bit wider).
Maybe you should get a ST300 and a Leatherman Crater (that way you would have a beefy tool and a OHO knife to go with your Rebar or ST300 ;)).
P.S. Seeking advice from a bunch of tool addicts is not always a good idea, most of us have a real problem when it comes to choosing just one tool, some of us (the worst cases) even have a weekly schedule to organize which tools they are going to carry
. -
@Top-Gear-24 said:
If I had to choose between the ST300 or the Wave, the Supertool always wins, I like the old style screwdrivers, the simplicity of the design, the fact that it's a beefy tool and last but not least, the plierhead.Now, since you already own a Rebar, buying the ST300 would mean that you're buying another Rebar, but this time the X-large version. On the other hand, if you want a larger tool than your Rebar, you would have to get the ST300, because the Wave is exact the same size as the Rebar (in length that is, the Wave is a bit thicker and with the OHO tools on the outside, the Wave is also a bit wider).
Maybe you should get a ST300 and a Leatherman Crater (that way you would have a beefy tool and a OHO knife to go with your Rebar or ST300 ;)).
P.S. Seeking advice from a bunch of tool addicts is not always a good idea, most of us have a real problem when it comes to choosing just one tool, **some of us (the worst cases) even have a weekly schedule to organize which tools they are going to carry **
.Wow, some people are nutcases huh? Wait a minute
........HEY 

-
oddly enough I have a harder time deciding what to carry on my days off. work days are a combination of what's planned and what may come up and that's been very easily handled by my wave. now that I have a swisstool and its squared away with bits, I can rotate these two or bring both on days I may need the extra set.
-
Sounds like I need a Wave, ST300 and a Surge! May try to get all of them and see which one I like the best, if I could get this dam divorce over with. Taking all my money. Wonder when the new Surge will come out?
-
When in doubt buy both, but in this case "boths"?!?

-
I have both the ST300 and the Charge AL (functionally same as Wave). For everyday use, the charge wins hands down. I didn't appreciate the outside opening tools until I got one. Very comfortable in my hands.
The replaceable cutters are very nice on the ST300. FWIW, a friend gave me a mint original SuperTool. And while I like how the design and functionality of Leatherman tools have evolved, the build quality of the original SuperTool is just a whole different level of Wow. The plierheads and screwdrivers are fully ground the entire length - no casting/forging seams. The blades have a highly polished surface (not like a mirror, but very refined) compared to the grainy satin finish on many of the newer tools. I suspect this more porous surface may make the newer tools like the ST300/Rebar more prone to rusting.
Elisabeth
-
@ToolDiva said:
... a friend gave me a mint original SuperTool. And while I like how the design and functionality of Leatherman tools have evolved, the build quality of the original SuperTool is just a whole different level of Wow. The plierheads and screwdrivers are fully ground the entire length - no casting/forging seams. The blades have a highly polished surface (not like a mirror, but very refined) compared to the grainy satin finish on many of the newer tools. I suspect this more porous surface may make the newer tools like the ST300/Rebar more prone to rusting.Elisabeth
I agree with you on the original Supertool being on a different level of build quality than the ST300, in my opinion my original Supertool comes close to Victorinox Swisstool fit and finish standards, the ST300, while being one of my all time favorites for "getting a tough job done" doesn't reach that same level.
And you're also right about the polished finish, I really like the polished finish on the old ST, I just wish they would make a ST300 with that kind of polishing.
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman Supertools/057.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman Supertools/057.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
... a friend gave me a mint original SuperTool. And while I like how the design and functionality of Leatherman tools have evolved, the build quality of the original SuperTool is just a whole different level of Wow. The plierheads and screwdrivers are fully ground the entire length - no casting/forging seams. The blades have a highly polished surface (not like a mirror, but very refined) compared to the grainy satin finish on many of the newer tools. I suspect this more porous surface may make the newer tools like the ST300/Rebar more prone to rusting.
Elisabeth
I agree with you on the original Supertool being on a different level of build quality than the ST300, in my opinion my original Supertool comes close to Victorinox Swisstool fit and finish standards, the ST300, while being one of my all time favorites for "getting a tough job done" doesn't reach that same level.
And you're also right about the polished finish, I really like the polished finish on the old ST, I just wish they would make a ST300 with that kind of polishing.
well said.
I have abused my ST300 more than any other tool, and while it can certainly take a beating and still get the job done, the fit & finish just isn't in the same league as on the older versions.very nice picture, too -- really highlights the difference well.

-
I'd say look at the Surge. Just like the Wave but beefier.
-
@Razor said:
I wanted a larger LM to go with my Rebar. Would you all recommend a Wave or one of the Supertools? Also, which model of the supertool do you like best, the original, 200 or 300?I am in the same boat as Razor, I currently have the ReBar and Micra (Great Scissors) and looking for a More Heavy or Stronger tool, seen many members here and other sites recommend the Wave (if you have the Bucks $$ then go for the Charge TTi) over the say Surge all due to the size and weight.
I am really leaning towards the Surge at the moment for myself all due to the OHO Scissors as I use my Micra heaps for this as I am a Channel Rep for a Telco manufacture here in Western Australia and need to cut POS for stores, heavy double sided tape, and cutting /opening boxes of stock and promo material, hence looking for a OHO MT also the Phillips screw driver, knife and flat pliers, was looking at the Charge TTi mainly due to the look and feel of the device and that it has scissors. Very Expensive over here in Australia $300+ AUD where as the Wave and the Surge are around the $150 - $220 AUD, still way more expensive that the USA, where I might buy my next one and one for my Father in-law.
I saw a great review by The Late Boy Scout on the Scissors for Leatherman tools including the Wave, Micra and Surge and would recommend having a look at it... http://youtu.be/oANkRBYVVms, After see this it made me lean towards the Surge so that I would then have the best of both worlds with the ReBar being a mid level tool and then the Surge a Heavy duty tool for those days I am installing a Store in Store.
-
@Syndicate said:
Have you considered a Surge?My thoughts too. the surge is basically the wave on steroids, it would be more comparable to the Supertool than the wave.
EDC: LM Charge TTI
Tool Box: LM Surge
http://www.youtube.com/user/gearsNtools
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login