Bo PST UK
-
Oh dear...I've just ordered one

-
Anywhere else and I'd say you had a problem mate :D
Sent from my Nexus 7 using Tapatalk 2
-
The gentleman who's selling the BO PSTs has come good again,very pleased with his service.
Apparantly,he has another four!
Anyone tempted?
-
Is this the same guy from poole Dorset as ive seen this guy and tempted as i could pick up,do i really need a bo pst
:ahhh -
@Zed said:
Is this the same guy from poole Dorset as ive seen this guy and tempted as i could pick up,do i really need a bo pst
:ahhhYes he is,yes you do

@Mike, Lord of the Spammers! said:
Is this the same guy from poole Dorset as ive seen this guy and tempted as i could pick up,do i really need a bo pst
:ahhhAt least this one would take longer to rust away :D
Sent from my Nexus 7 using Tapatalk 2
This is a proper LM...it DOESN'T rust(much)
-
This'll be the first one I've owned that doesn't then :D
Sent from my Nexus 7 using Tapatalk 2
-
-
It's too cold most of the time where you are for your LMs to rust;D :P
Sent from my Nexus 7 using Tapatalk 2
-
-
Question for the buyers of these ... are you actually using them? If so, is it for nostalgia's sake, or because you actually consider it a good tool?
Genuine question BTW. I have a PST II (never owned a PST) in reserve for laying to slaughter should I ever get another PT-510 I want to add the scissors and diamond file to ... but I don't particularly want to use it as it is. There's too many "better" options out there which don't hurt the hands :P I think the only time it's ever really been used is to hold the tool adaptor for using hex bits :D
-
To answer your question, I bought mine to be a user, although sort of for the same reason as you. I've had a Tool Adapter for some time but no PST (or variant) to use it with. I've seen plenty for sale on EBay but mostly in the States and none would ship over here. I jumped at this one because it was BNIB and BO. Now I can use my Tool Adapter, though as you say the handles can bite into one's fingers. The PST I doesn't have the full range of tools of say, my Blast and certainly wouldn't compare to something like a ST300, but on the other hand it is non-locking and therefore I carry it with me. I EDC mine with a set of small, folding Fiskars scissors and that setup gives most of the basic functionality that I need.
Incidentally, would you know if they ever produced a BO version of the Tool Adapter??
-
Mine was bought as a user,effectively as an upgrade to my KST.
I've written about it elsewhere,but until the Christmas rush starts,I expect to be using the KST. When things start getting heavy again,I'll probably go back to my modded Fuse
-
@Billy Ruffian said:
To answer your question, I bought mine to be a user, although sort of for the same reason as you. I've had a Tool Adapter for some time but no PST (or variant) to use it with. I've seen plenty for sale on EBay but mostly in the States and none would ship over here. I jumped at this one because it was BNIB and BO. Now I can use my Tool Adapter, though as you say the handles can bite into one's fingers. The PST I doesn't have the full range of tools of say, my Blast and certainly wouldn't compare to something like a ST300, but on the other hand it is non-locking and therefore I carry it with me. I EDC mine with a set of small, folding Fiskars scissors and that setup gives most of the basic functionality that I need.Incidentally, would you know if they ever produced a BO version of the Tool Adapter??
You mention you EDC the PST because the blades don't lock, are you certain it still won't fall foul of S.139 guidelines as the blade is "not readily foldable at all times"
-
You're talking about when the handles are closed and the knife blade is out, right?
Well, I don't want to become a test case but I would argue that the tool has no locking mechanism. It is incapable of being locked in one fixed position. And even when the handles are closed, it does still fold to some degree. It certainly isn't secured in place by a lock. I've just tested it and the blade actually forces the handles apart if pushed down on hard enough, rather than being locked in place.
However, I really don't want to ever have to put that to the test legally, so it's back to scouring the web for a knifeless Fuse...again. -
@Billy Ruffian said:
You're talking about when the handles are closed and the knife blade is out, right?
Well, I don't want to become a test case but I would argue that the tool has no locking mechanism. It is incapable of being locked in one fixed position. And even when the handles are closed, it does still fold to some degree. It certainly isn't secured in place by a lock. I've just tested it and the blade actually forces the handles apart if pushed down on hard enough, rather than being locked in place.
However, I really don't want to ever have to put that to the test legally, so it's back to scouring the web for a knifeless Fuse...again.My thoughts also. I think the locking screwdrivers could cause a problem on a fuse, a modded kick or PST with the blade removed might be ok.
-
There's a thread somewhere in the Mod Squad with my Bladeless Wonders,and a small number of us Brits have done bladeless conversions to,let me think,PSTs,Geber MP400s,SOG PPP,and Powerlocks,Fuses and Kicks. There's also been bladeless SAKs done too!
But about the locking drivers,as TaxiDad says,if they're going to nick you for that,they're going to nick regardless!Even if your clean on everything,they'll find something!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



