Gerber BG knives.
-
Ya as much as I dislike gerber products, that looks worse then what even official gerber puts out. I bet that is a fake, in that its made at a different crappy factory then the official crappy factory that makes them.
I looked on youtube and found this complaining of a poor quality fake. Looks like what you have too.
Be careful a fake Gerber Bear Grylls Ultimate Knife 31-000751, quality awful!!!
and this.
Its really hard to tell if its just poor newer contract they went with (they switched manufactures when version 1 failed and the pommels broke) or a fake. Id ask Gerber, I would hope they would know.
-
Now that is interesting. In that video, he is comparing two serrated knives. Yes, mine could very well be a fake. Lucky for the seller, I like a good fake.
-
Just comparing to the pic on gerbergear.com, it might look like you have got a fake. If you look at the orange part between the handle and the pommel, you can se that in the your CE version it is of varying thickness, while in the PE its the same thickness all the way. On the pic on gerbergear, the PE has varying thickness like youR CE. Also on gerbergear the PE has the new GERBER font, but yours has the old.
Just a couple of things I noticed. -
And here I was hoping that Gerber had come to their senses and dumped the useless half-serrations.
Ah well.
The Paracord knife does still have a rather nice blade profile.
-
Gerber really have done a plain edge, it just a worry that this isn't one of them.
-
yup. that's a fake. i actually bought two combo edged bg knives a while back and the fake one broke from inside the handle after batoning.
Sent from my Cruize W280 using Tapatalk 4 Beta
-
@Goatlord666 said:
yup. that's a fake. i actually bought two combo edged bg knives a while back and the fake one broke from inside the handle after batoning.Sent from my Cruize W280 using Tapatalk 4 Beta
You really can't judge the quality of a knife when it fails at batoning. Knives are meant to do this.
-
yup. that's a fake. i actually bought two combo edged bg knives a while back and the fake one broke from inside the handle after batoning.
Sent from my Cruize W280 using Tapatalk 4 Beta
You really can't judge the quality of a knife when it fails at batoning. Knives are meant to do this.
A normal knife for sure. But this is an ultimate knife!

-
hehe. the original bg knife i bought was able to withstand all that pounding. but the fake one...well i still have it in two pieces
Sent from my Cruize W280 using Tapatalk 4 Beta
-
Oops...I did it again.
I just had to get the ummm...Gerber Bear Grylls Ultimate Pro Knife. Seeing that I now have a serrated Ultimate, and a fake non-serrated Ultimate...the Pro was a shoe in. I don't think I will get a real non-serrated Ultimate...the fake will do for now. But I digress, I had to get the Pro to see what the differences are in person.
Fake Ultimate, Ultimate, and Ultimate Pro.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3200small_zps80909bd5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3200small_zps80909bd5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Fake, Ultimate, and Ultimate Pro. Notice the blade difference between the fake and the two Gerber knives which are the same. Also notice that the pro goes tactical black...you know, for those mall ninjas.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3206small_zpsc30e148c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3206small_zpsc30e148c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>You know it just wouldn't be a BG Gerber item without the over the top flash. Here is the signature on the blade.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3208small_zpsf2b218fa.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3208small_zpsf2b218fa.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Here, notice how the fake has a much smaller flint striking area compared to the two real Gerber knives on the right.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3203small_zpsca6852cf.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3203small_zpsca6852cf.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The Pro knife came about because people were complaining about the Ultimate knives not having a full tang...or at least the first run knives. I don't know if they fixed that issue or not. The Pro has the tang in full view to ensure people that the knife is tough and durable and won't fall apart in your hand with a broken handle.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3211small_zpsc592c566.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3211small_zpsc592c566.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The handle halves are held together by two nut and bolts. Note also the two holes provided so that you can lash the knife to a stick and use it as a spear.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3207small_zps89ae8b02.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3207small_zps89ae8b02.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The pommel has the usual hammer application applied to it, however, the shape of the striking surface is in my opinion, a better shape than that found on the lower Ultimate knife.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3209small_zps23199d22.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3209small_zps23199d22.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Now lets focus a little more on the sheath provided. It differs from the Ultimate knife in many way. Here is the backside of the sheath. Note the lack of any air signaling information.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3220small_zps4e1fb6e1.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3220small_zps4e1fb6e1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The back has a carbide sharpener.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3212small_zps6b0d4c5f.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3212small_zps6b0d4c5f.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>It is a lot less bulkier than the diamond sharpening plate found on the Ultimate knives. However, you can really only sharpen blades. No more sharpening hooks etc. I prefer the Ultimate knives sharpeners multifunctionality to that of the Pro's sharpener..if not how it was implemented in the old sheath. On the plus side, it will be harder to wreak your knife in the field with the Pro's carbide sharpeners.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3213small_zpsea529f23.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3213small_zpsea529f23.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>A big improvement over the flimsy hidden pocket behind the air signals info patch, the Pro's sheath has a nice pocket for Bear's mini survival guide. They even give you a nifty ribbon to help you pull out the guide. I of course didn't notice it until it was too late. I had shoved the guide into place after discovering it, and needed a pair of pliers to pull out the guide. Then I noticed the ribbon. Use the ribbon, it works great and prevents a lot of swearing and tool application.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3216small_zps82c2fc9e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3216small_zps82c2fc9e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The bottom half of the sheath is hard plastic covered in nice feeling soft rubber. I will have to say, the advertising on the pro is very well integrated and polished.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3219small_zpsa42c10bf.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3219small_zpsa42c10bf.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Another improvement to the sheath, the included fire rod is no longer upside down waiting to fall out. It is now fixed in the upright position. My issue with the new design though, Gerber made sure your never getting this sucker out unless you use the knife blade.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3217small_zps19f9a91b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3217small_zps19f9a91b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>This is the retention for the fire rod. I couldn't for the love of God and Country, pull the fire rod off of this protrusion without first using the knife blade. You have to pull outwards with the knife, and pull upwards with your fingers at the same time. I know that this will never fall off...but does it have to be so difficult to take it off without risking cutting yourself in the process? Seeing that the old system was too easy to remove the fire rod, Gerber went to far in the other direction and made it difficult to remove it.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3218small_zpse00742fd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3218small_zpse00742fd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The Pro's sheath also has nice textured rubber sides.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3221small_zps6787f007.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3221small_zps6787f007.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Well that wraps it up for the Pro. Overall, It appears to be a mixed bag. I love the knife with the full tang visible. Of course, the colour and materials/textures are things I already like. The sheath is nice, but I do like the versatility of the older diamond hone over the simplicity of the carbide cutters. The fire rod won't fall out on the Pro. Just be prepared to swear a little when removing it, and try not to cute yourself in the process. I guess you could use something else to pry it outwards...but the knife tip is the logical tool in a survival situation.
Oh and I forgot to add this little bit of info. The seller of the fake Ultimate knife told me after I contacted him, that it was made in the same factory as the original Gerber...just to a cheaper spec to fleece non-suspecting buyers. I guess the adage that if you want a fake, buy from a Hong Kong seller is true. :)
-
I'm thinking of getting the Fine Edge Ultimate Knife.
-
Always love reading these image rich reviews Dan...I was out of beer so I just settled for donuts and coffee as I went through this epic review.
Oh BTW, I found old pictures of my batoning test aftermath results when I tried to pit an original BG vs a fake one

Sent from my HP Slate 7 using Tapatalk now Free
-
@Goatlord666 said:
Always love reading these image rich reviews Dan...I was out of beer so I just settled for donuts and coffee as I went through this epic review.Oh BTW, I found old pictures of my batoning test aftermath results when I tried to pit an original BG vs a fake one

Sent from my HP Slate 7 using Tapatalk [http://tapatalk.com/m?id=10'](http://'[url)]now Free[/url]
Well the fake one is certainly not full tang. :o
-
Nice pics Chako!

-
I have to say that so far I'm really liking my Ultimate Knife. I haven't used it hard yet, but I think it'll hold up just fine.
I love orange, so the colour suits me, and it's comfortable to use, so thus far it gets a
from me.Sent from my iPhone 5 using Tapatalk
-
I must admit, the "Pro" knife would be very tempting to try if it wasn't a celebrity endorsement job :P They seem to have made a real effort to get that one right

-
@Chako said:
Oops...I did it again.(...)
Another improvement to the sheath, the included fire rod is no longer upside down waiting to fall out. It is now fixed in the upright position. My issue with the new design though, Gerber made sure your never getting this sucker out unless you use the knife blade.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3217small_zps19f9a91b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3217small_zps19f9a91b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>This is the retention for the fire rod. I couldn't for the love of God and Country, pull the fire rod off of this protrusion without first using the knife blade. You have to pull outwards with the knife, and pull upwards with your fingers at the same time. I know that this will never fall off...but does it have to be so difficult to take it off without risking cutting yourself in the process? Seeing that the old system was too easy to remove the fire rod, Gerber went to far in the other direction and made it difficult to remove it.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_3218small_zpse00742fd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo001/IMG_3218small_zpse00742fd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Looking at the pics, it seems that if you press down on the tip of the sheath, above the GERBER over the firesteel retention "tooth", it might just get out of the way to let you pull the firesteel out.
You still have to take out the knife from the sheath but there's no need to use it to get the firesteel out.
(it makes sense having to take out the knife, you'd be using it to strike the firesteel). -
good point.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

