JA,s OHT challenge.
-
I may have been slightly less than charitable in my views of the OHT previously (particularly due to the contentious way it is marketed)
;) but the bottom line is it is working very well for you, and quite frankly, that's what matters most
I still can't see it being a tool for me and my needs. I would have little need for a strap cutter and all those flat drivers, needing instead scissors and awl much more frequently, but that's not a "failure" of the tool in any way, just that it suits other people better than me :)One of my (and other people's) criticisms has fell on the shortness of the blade and saw, although in truth I have personally found the short blade on the MP700 to be perfectly adequate for many (urban) chores. We can see the length is rather stubby compared to the body of the tool, but is there any chance of comparison pics to the length of the blade & saw on a 91mm Vic and 85mm Wenger please anyone?

-
Il take some pics when I get home 50ft-trad its about in-between a 91 Vic and a Wenger 80whatever mm saw. Closer to Wenger.
I haven't found the blades and tools to short for any task I've used it for. So far.
there sort but work very well. You get a good grip. Comfortable.I think the folks at leatherman put a lot of thought into the oht. All the tools and functions it has that I've used work very well.
I wish they would make a more civilian oht its close to being a really great tool now. a file and awl are needed to make it a much better tool for every day use by normal working people. A scissors would also be nine but then I wouldn't have a reason to carry my micra :)
I love mine but I carry a tool box with me . :P
-
Thanks JA

-
Hey Joel,
Glad you are getting to test this OHT daily. I dont own one but heard quite a few negatives about it shortly after it came out.
These are the true testing of MT's that I enjoy reading. The ones that actually are put to a test and not one that just shows the tools and someone just opening the package to get the MT out! LOL
I agree that it doesnt have all the exact tools I would want but it not a bad setup, just add a sak and your set.
To me I dont think they are at a good price point for what you get! Just my opinion though but I would try one if I found one at the right price or found a trade deal! :)
I also heard that someone modded the package opener into an awl and it works/looks great!
:D
-
The oht had a pretty easy day today.
I used it to clip a few wires and the serrated blade to cut some drain house but I didn't get any pics its to dark under houses to get a good one.
I did get a pic of putting a plate back on my work truck.

and here's the requested pic for 50ft-trad

surprisingly the oht's saw is shorter than a 84mm wengers by a centimeter or 2
the Vic saw is quite a bit longer.edit
saw thoughts
I would have never thought the oht's saw was a little shorter than a standard wenger
It's never felt like it was to short when I've used it.
the handle is comfortable to use / easy to grip and hold when sawing.
I'd prefer a replaceable blade but the saw it has works and seems to stay sharp .
one hand opening kicks ass

-
Nice saw comparison pic Joel
Keep up the good work with this thread my man. -
@50ft-trad said:
One of my (and other people's) criticisms has fell on the shortness of the blade and saw, although in truth I have personally found the short blade on the MP700 to be perfectly adequate for many (urban) chores. We can see the length is rather stubby compared to the body of the tool, but is there any chance of comparison pics to the length of the blade & saw on a 91mm Vic and 85mm Wenger please anyone?
The Blades might be a little short, but they work rather well and sometimes you just need a small blade to get into tight places. As for the saw, it is a beast. I tend carry a regular blade with my multi and it seens like the LOHT was made to compliment a dedicated knife.
sent from my mobile -
and here's the requested pic for 50ft-trad

surprisingly the oht's saw is shorter than a 84mm wengers by a centimeter or 2
the Vic saw is quite a bit longer.edit
saw thoughts
I would have never thought the oht's saw was a little shorter than a standard wenger
It's never felt like it was to short when I've used it.
the handle is comfortable to use / easy to grip and hold when sawing.
I'd prefer a replaceable blade but the saw it has works and seems to stay sharp .
one hand opening kicks ass

Thanks for that JA

That saw is actually even shorter than I though :o :o BUT at least it's outboard on this tool, which means that more of the blade is usable (unlike the Rebar / ST300 etc)
@ducttapetech said:
The Blades might be a little short, but they work rather well and sometimes you just need a small blade to get into tight places. **As for the saw, it is a beast. ** I tend carry a regular blade with my multi and it seens like the LOHT was made to compliment a dedicated knife.
sent from my mobileBut it's tiny! >:D All this praise for such a small saw :P It must be like the vicious bunny in The Holy Grail :D
Many thanks for the pics and comments guys, you've convinced me it's really not for me (thank you :D) but I'm very glad it's working so well for you two

-
@JAfromMn said:
Sorry I'm so slow
pizza for me/Mrs.ja and gravy train for the doggies

the can opener works well I got the can open in about 20 seconds

it was smooth cutting and it was fun one hand open my can opener 8)more important to me the tool/coating held up to opening the can

sorry for the crapy pics
Finally!
-
I just used the oht to pry open 5 locked mailboxes that where missing keys
the flat driver worked to get them open with no damage to the tool.
the only other tool I've used to pry them open was the crate opener on a swisstool.
this is one tough leatherman.
I used a lot of force /border line abuse/
ive bent cheap screwdrivers trying to do the same thing. -
@JAfromMn said:
I just used the oht to pry open 5 locked mailboxes that where missing keysthe flat driver worked to get them open with no damage to the tool.
the only other tool I've used to pry them open was the crate opener on a swisstool.
this is one tough leatherman.
I used a lot of force /border line abuse/
ive bent cheap screwdrivers trying to do the same thing.
-
Shouldn't all Leatherman's be tough?
-
@JAfromMn said:
I just used the oht to pry open 5 locked mailboxes that where missing keysthe flat driver worked to get them open with no damage to the tool.
the only other tool I've used to pry them open was the crate opener on a swisstool.
this is one tough leatherman.
I used a lot of force /border line abuse/
ive bent cheap screwdrivers trying to do the same thing.Leatherman flat drivers are awesome! Well, most of them.
-
Todays' oht work
I was putting in ac again on a few homes today.
here's what I used the oht for.
the first time I used it this morning was getting a screw out that I couldn't get at with the drill/driver

I needed to get a pic of this task I usually do under houses.
I don't try bring my phone with me anymore.
I'm on my 3rd Nokia this year already :o
cutting the clear rubber hose I use for drainage

tightening a plastic cap on copper tubing for ac refrigerant. I put these little caps on and take them off each line I install. Two lines per ac unit. one feed one return.
I also usually do this under the home but I'm trying to get a decent pic of each tool in use. I'm a nerd >:D

pocket dump
the oht does all the work. I carry the rest because I'd miss it.
ok I need the light too lol
-
Has the length of the Phillips driver hindered you in use so far? Any changes you wish for except the obvious one - put a file on it.
-
That was a heavy day!
-
Hey Joel,
Just wondering if a bit adapter that was made for the Juice line as well as others would fit on the philips driver so you can use a vairiety of bits!
If so, that would be great! :D
-
I was wondering that myself, but I dont have the bit adapter to try.
sent from my mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login