Rebar Mod
-
thank you for the answer. but if the plier touch the back spring for 2mm o 3mm i can grind the pliers to fit without compromise the lock. Maybe if i lift up a little the flat drivers the head can stay in the closed position
-
There is no way to do this.
The aperture where the rebar head sits in the handle is tuned for the pivot area's thickness. Having taken apart a few Spirits with the same tab tensioner, the handle's thickness accounts for the additional material that the sandwiched tab tensioner takes up.
Unless you start making new handle frames, its not a simple matter of cutting and putting in a part. Prying the handle distance will misalign the pivot holes too.
If you get this going, however, I tip my hat to you. I defer to better plier head locking designs than the Leatherman ones (ironically since I prefer LM over most companies)
-
It would be an interesting mod, but for sure you'd need to start with making a new frame. Vic ones also have the lock release on the side, if you stuck with the LM one, it would be on the inside and awkward to release a tool lock when closed. Outside opening tools is one of the reason I prefer Vic MTs.
-
ok, thank you for the answers, now i have to take a wave or a spirit

-
.... or both ....

:D
-
maybe :D
-
If you want outside opening tools why not buy a Bear & Sons or a Spirit...
-
because the spirit is good for me , but i wanna have the plier with the wire cutters removable and a hole for a cord for don't loose my multitool.
-
The new Surge has everything you are asking for.
-
Anything is possible including this. This is the whole purpose of MTO. What's the motto again? Anyone? So now I say stop saying no and let's all work together for a solution instead of falling into the "no it can't be done forum" after all it's what we do :)
-
@tattoosteve99 said:
Anything is possible including this. This is the whole purpose of MTO. What's the motto again? Anyone? So now I say stop saying no and let's all work together for a solution instead of falling into the "no it can't be done forum" after all it's what we do :)That is why I recommended Bear & Sons, it's essentially just what he's after aside from the OHO.
-
Anything is possible including this. This is the whole purpose of MTO. What's the motto again? Anyone? So now I say stop saying no and let's all work together for a solution instead of falling into the "no it can't be done forum" after all it's what we do :)
That is why I recommended Bear & Sons, it's essentially just what he's after aside from the OHO.
Excellent idea! But does it have the replaceable cutters?
-
No it doesn't have those :-\
-
Wouldn´t it be easier to find a tool with the right configuration (butterfly opening, outside opening tools)
and then look for a plier head with replaceable cutters that can be convinced to work there?
Say Rebar head to bear and sons?
Swapping handle tools should be rather easy afterwards, maybe SOG tools fit or even the ones from the donor-rebar, given you do not find the Toolset given satisfying. -
i see the greber strata :D but for the review on the internet this multitool doesn't look very well made, and in italy to buy it i have to order from a famous site (A....n) and cost 100 euro (140 dollars ). if it not cost more than a wave i will try. Anyone have the Gerber Strata and can talk me about? :)
-
Not the standard version, just the BG variation, and you can read my thoughts here ...
</topic/38925
Not bad, but not worth what you would have to pay locally IMHO
-
What about an MP700? That has replaceable wire cutters, a one hand opening blade, outside accessible tools and after playing with Al's is the first Gerber I've really wanted. The only thing is it's a bit smaller than the Rebar/Wave
Other than that, depending on how outside accessible you want things, I'd stick the Rebar pliers in a Wave.
-
@Cupboard said:
What about an MP700? That has replaceable wire cutters, a one hand opening blade, outside accessible tools and after playing with Al's is the first Gerber I've really wanted. The only thing is it's a bit smaller than the Rebar/WaveOther than that, depending on how outside accessible you want things, I'd stick the Rebar pliers in a Wave.
Having a MP 700 in the drawer, I should have thought of that...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
