And so it begins.... (My adventures into Alox!)
-
If syph ever makes carbon steel blades, my wallet is in trouble!
-
Just my preference. I've always wanted a SAK with a carbon steel blade.
-
Good mornig,
I am new to the forum, and the SAK modding,I just bought a victorinox alox farmer and I would like to change it after having already seen at work. :)
now, I have a couple of questions from novice:
my mod is: Replace cap lifter with Electrician pruning blade, is it possible? for (size and space)
- Between the methods that I like the most to reassemble prefer the pivot and torx, I found this linked from you:
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
http://www.knifekits.com/vcom/product_info.php?cPath=60_81_230&products_id=1248
my question is the measure is already correct or do I enlarge the holes of my victorinox? the diameter of the pivot's good enough for the other accessories already present or do I have to redo all the holes? the length is correct for my sak? or I have to cut away part of the pivot? you can do?
the size of the original pins look different, those at the ends seem more large (diameter) than the central mildly smallest is correct?

how i can fix this? I have to make a hole to widen it?one last thing: I really like the idea of coloring the spacer where can I find these?

or how do I get my color permanently?I really like this result:

I have not found a good step by step guide to change my alox SAK really appreciate if you can help
- Between the methods that I like the most to reassemble prefer the pivot and torx, I found this linked from you:
-
If you browse the first pages, you will find good step by step pictures of how teh Syph-SAKs come together.
The Liners pictured have been polished and then Hard-Anodized. Syph had them done by a Pro and uses them in his mods.
You will have to redrill the tools, liners and scales of a SAK to 1/8 to use the Knifekit pivots. You will also have to shorten the pivots according to the width of your knife.
I am pretty sure an electricians blade can be used, but I do not know if you will have to reprofile teh pivot area or if you maybe need to use a different spring altogether.
-
The problem behind an electrician's blade at the position of the caplifter is that the nailnick is on the wrong side and the blade must be bent in the opposite direction. But it can be done.
-
thank you very much to both appreciate the help

it is true, I had not noticed before ... thanks for warning
a general question you can find tools and shells individually?
or the only way is to buy several knives to retrieve tools and parts? -
Every time I open this thread, I can feel a giant sucking sensation on my wallet.
I'm going to have to get another custom SAK in the near future. These new anodized colors are just too tempting...
-
@Nico88 said:
thank you very much to both appreciate the help
it is true, I had not noticed before ... thanks for warning
a general question you can find tools and shells individually?
or the only way is to buy several knives to retrieve tools and parts?Yes, the only option is to buy several knives and get the tools you need from them. One of the reasons why custom work is expensive.
Also, welcome to the forum.

-
What do you think of blue alox with black liners?
:D -
I dont think ive done black/blue with silver tools just BO'd ones.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





