Leatherman Jam
-
Anybody frequent any skate/snowboarding forums then?
There must be some sporty young people in the forum here that can give as the reaction of the extreme sport community to these tools. Maybe LM knows something we do not.. :-\It looks to me like it will snap when any reasonable amount of torque is applied to it.
-
Seriously?
Hail and Rime.
Cam, Pump and Rail.
Thruster and Shooter.
Jam and Grind.
Juice SX.
Those are some bad names.

-
Juice SX?
-
Skeletool SX
-
Ah...that's too bad. I would have been curious about what the Juice SX would have been. Probably have a diamond file on one of the scales ;)
-
@Leatherman said:
A modification to the Juice tool called the Juice® SX, will provide a full-size, folding multi-tool that includes pliers, knife, screwdrivers and a 7/32” fin key and more. -
@Leatherman said:
A modification to the Juice tool called the Juice® SX, will provide a full-size, folding multi-tool that includes pliers, knife, screwdrivers and a 7/32” fin key and more.Hmmm, where did you find this interesting tid-bit?
Disregard, I found it:
-
Found an interesting picture to accompany this news.
I actually like the one little wrench. That seems like it would be a useful enough one piece tool, without being overkill.

-
JUICE SX!!!!!!!!!
-
@rdub934 said:
Yay, more junk!Meet the JAM. This new skateboard tool's features include:
Grip Tape File
9/16" Open End Wrench
Bottle Opener ...
Carabiner
1/2" Open End Wrench
3/8" Open End Wrench
Stainless Steel
Black Oxide
Key Ring Hole
Travel Friendly
Headphone Storage
Length: 4.2 in | 10.8 cm
Weight: 1.6 oz | 46 gAvailable in November
maybe I should take up skateboarding again.
its only been 15 20 years or so
-
Man oh man. The Jam looks terribly uncomfortable to use in any way, and as others have said it looks incredibly dangerous to carry while engaging in the sport it's designed for. It would be beyond stupid to clip that thing to your belt and risk falling on it.
And what's with the whole "release the surf and skate tools in October" plan? Are they TRYING to shoot their sales down before they start?
I have one thing to say to Leatherman:

-
Picture of the strawberry Jam...


From the Leatherman Sport Facebook page

-
You know what...
The more and more I look at these new OPMT offerings, I can at least appreciate LM's tenacity to explore multiple designs. I mean it's still, technically, their first go at OPMT since acquiring PTX and like their other tools, needs many iterations before they hit a good one.
I like the styling and innovation, ergonomics aside. Too many of these OPMT have close ended wrenches, rendering them useless for stuff like bearing and wheel bolts.
I am going to support this.
Let the onslaught of criticisms commence!
-
I agree, Metro. I don't think these tools are that bad. Just, not that good... yet.
How else is a multitool manufacturer supposed to stay in business if they are limited to selling general purpose tools? Especially ones that are guaranteed for 25 years. Leatherman recognizes this and has made several attempts at tackling the more specific niches (military, gardening, hunting, EMT, knives, flashlights, etc...) That's all this is - they are just searching for a new market.
-
@Metropolicity said:
The more and more I look at these new OPMT offerings, I can at least appreciate LM's tenacity to explore multiple designs. I mean it's still, technically, their first go at OPMT since acquiring PTX and like their other tools, needs many iterations before they hit a good one.I'm sorry, but I cannot follow your logic here.
PST = First iteration
And tool after tool from there on and for a long time were solid if not occasionally mildly esoteric (Flair) or carrying a small flaw (ST200/Pulse locks).
Extensive R&D, multiple design iterations, prototyping, testing, refining... There is a process that should be followed prior to releasing a tool that at least in theory should lead to reasonable success. Not forcing bad designs to market and then working it out with later revisions.
The man behind the Skinth knows this. I don't recall you ever releasing any garbage to the public.
That.. thing... The Jam... is a pure mess. It is ugly, pointy, appears absolutely a product of "cram it all on there no matter what it feels or looks like" function based engineering with nary a hint of form consideration or user interface.
It is absolutely terrible. There are infinite ways those tools could have been combined, and from where I stand, the metal amoeba of wrenches is the worst possible choice. What about multiple OPMTs that nest somehow into a compact unit? Or that engage each other in some clever fashion?
Hell, MT.org users could have done a better job by committee. It was apparent immediately to us that an active sport that involves falling down might require a tool without lots of sharp points.
That thing is like skating with a throwing star in your pocket.
-
The more and more I look at these new OPMT offerings, I can at least appreciate LM's tenacity to explore multiple designs. I mean it's still, technically, their first go at OPMT since acquiring PTX and like their other tools, needs many iterations before they hit a good one.
I'm sorry, but I cannot follow your logic here.
PST = First iteration
And tool after tool from there on and for a long time were solid if not occasionally mildly esoteric (Flair) or carrying a small flaw (ST200/Pulse locks).
Extensive R&D, multiple design iterations, prototyping, testing, refining... There is a process that should be followed prior to releasing a tool that at least in theory should lead to reasonable success. Not forcing bad designs to market and then working it out with later revisions.
The man behind the Skinth knows this. I don't recall you ever releasing any garbage to the public.
That.. thing... The Jam... is a pure mess. It is ugly, pointy, appears absolutely a product of "cram it all on there no matter what it feels or looks like" function based engineering with nary a hint of form consideration or user interface.
It is absolutely terrible. There are infinite ways those tools could have been combined, and from where I stand, the metal amoeba of wrenches is the worst possible choice. What about multiple OPMTs that nest somehow into a compact unit? Or that engage each other in some clever fashion?
Hell, MT.org users could have done a better job by committee. It was apparent immediately to us that an active sport that involves falling down might require a tool without lots of sharp points.
That thing is like skating with a throwing star in your pocket.
I'm with you Glorn. The design team that headed this tool up was either extremely rushed or they aren't worth a damn at what they do. You're right, the fatal flaws that this thing is covered in were blatantly obvious to us right away. If their strategy is to wing it and see what happens, they'll see real quick with this one. They can't possibly have tested this thing at all with real skaters.
Supporting LM is fine, I support them by buying the products that work. Supporting foolish designs for the sake of it is a personal preference that I choose to do without. It would be a waste of my breath to say "give these a shot, at least they're trying!".
Leatherman is not new, they aren't a fledgling company, they've been around the block a few times and I expect better from them. In my mind there is no leeway whatsoever for a set of design fails like the Jam, Thruster, Rime, Hail, and their ilk. Leatherman should be embarrassed by these ridiculous attempts to tap a market that they don't belong in.
-
Agreed.
I will say that I appreciate and even expect that LM would search for new markets and try to expand their customer base. I'd say they were inept if they didn't. My criticism lies squarely with the design of the tool, and my own question as to whether there is even a market for a skate boarding tool. Well, one that doesn't have a roach clip attachment or a hidden stash compartment for weed anyway.
It looks like a Rorschach test. And all I can see is a focus group of SoCal skaters staring at it blankly and saying, "Uhm... Is it a bat?"
Credit where it is due: Rebar I adore. OHT is not my thing, but clearly looks like a winner. And I think the Wingman Sidekick move was brilliant (assuming they are actually selling as well as projected). I have liked a lot of what I have seen recently, and if they can shore up these QC issues, I'd say LM is on a good path.
But adding sand paper to the side of the Skeletool? This clearly poorly researched JAM? A surfing tool (really, WTF?)
I'm gonna call all that as I see it. Which means calling BS.
-
I bet if I surfed I'd think the thruster kicked ass.
and if I still skated I'd have to own a jam
I just wish leatherman would market some new tools at me. Handyman
I need to wrap my headphones around something too

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login