the tool with no name ! (yet)
-
Both of these guys are loyal plier people, so I think we are good with them posting here.

It looks like a great design so far, but I'm looking at it on my phone so I don't have anything constructive to add at the moment.
Def
Sent from my SGH-I747M using Tapatalk 2
-
@50ft-trad said:
Nice job Peter
A couple of thoughts ... as the blade doesn't have to fold, would it be worth looking at larger blades such as reciprocating saw blades or is the tang of the holder going to be too weak.
**Another thought is that if you get the tang of the saw to sit deeper, you can get the grub screws to sit in front of the T in an internal dimple and not rely on friction. Less chance of a user feeling they have to bear down when tightening and strip the (delicate) threads ... although there is the possibility of the threads on the screw being damaged by the blade I suppose, which would make releasing the blade tricky
Maybe the thread on the screw would be more durable to damage from the saw, than the holder threads would be to over tightening 
**If I look closely at the pics, it seems it's not friction holding it in, but a 'bump'. The screws only hold the sawblade 'down' behind the bump... (I can't really explain it any better, I think... damn you words
)Edit: This shows best in the second and third pic.
-
-
@50ft-trad said:
Nice job Peter

A couple of thoughts ... as the blade doesn't have to fold, would it be worth looking at larger blades such as reciprocating saw blades or is the tang of the holder going to be too weak.
**Another thought is that if you get the tang of the saw to sit deeper, you can get the grub screws to sit in front of the T in an internal dimple and not rely on friction. Less chance of a user feeling they have to bear down when tightening and strip the (delicate) threads ... although there is the possibility of the threads on the screw being damaged by the blade I suppose, which would make releasing the blade tricky
Maybe the thread on the screw would be more durable to damage from the saw, than the holder threads would be to over tightening 
**If I look closely at the pics, it seems it's not friction holding it in, but a 'bump'. The screws only hold the sawblade 'down' behind the bump... (I can't really explain it any better, I think... damn you words
)Edit: This shows best in the second and third pic.
Ahhhh - I see what you mean now Tom

Ignore my previous stupidity please Peter

-
@50ft-trad said:
@50ft-trad said:
Nice job Peter

A couple of thoughts ... as the blade doesn't have to fold, would it be worth looking at larger blades such as reciprocating saw blades or is the tang of the holder going to be too weak.
**Another thought is that if you get the tang of the saw to sit deeper, you can get the grub screws to sit in front of the T in an internal dimple and not rely on friction. Less chance of a user feeling they have to bear down when tightening and strip the (delicate) threads ... although there is the possibility of the threads on the screw being damaged by the blade I suppose, which would make releasing the blade tricky
Maybe the thread on the screw would be more durable to damage from the saw, than the holder threads would be to over tightening 
**If I look closely at the pics, it seems it's not friction holding it in, but a 'bump'. The screws only hold the sawblade 'down' behind the bump... (I can't really explain it any better, I think... damn you words
)Edit: This shows best in the second and third pic.
Ahhhh - I see what you mean now Tom

Ignore my previous stupidity please Peter

Tom is indeed correct, the blade drops in behind two posts that retain the 'wings' of the blade's interface and the grub screws just keep the blade from moving out of this position. There are four grub screws because i wanted to reduce twisting and keep the blade as secure as possible, all blades are subtly different so friction retention is still an important part of the design to avoid unwanted movement.
The design also allows the smaller blade type to fit inside the holder but they would only be retained by the friction of the grub screws so probably not a great idea as jigsaw blade's teeth are arranged for cutting on the pull stroke rather than the push stroke like hacksaw blades.
@enki_ck said:
I think you might be excused for bending the rules a bit here Tofty, but only cause it's you.
Grant might
me for saying it though. 
Now that's cool.
The amount of screws worries me though. Here's what I thought wen I saw it. A slide on lock with a compression tab to keep the saw in place. No screws. Maybe some jimping on the sliding part to make it easier to take off. Sorry for te quice MS Paint drawing.
Thanks enki_ck it's a good idea for a quick blade exchanger, the only problem is the poor surface finish and low detail resolution of current 3D printing which limit the complexity of the design,
I'll keep it in mind though for future revisions.@50ft-trad said:
@enki_ck said:
@50ft-trad said:
Nice job Peter

A couple of thoughts ... as the blade doesn't have to fold, would it be worth looking at larger blades such as reciprocating saw blades or is the tang of the holder going to be too weak.
...J-Sews already did that. They were being sold through EDCS some time ago.
Absolutely, but he did modified blades rather than a holder that could accommodate standard ones

So long as the Leatherman lanyard interface works as a printed object then any other type of tool adapter can be substituted for the jigsaw holder including a reciprocating blade holder, proper 1/4" hex driver or even a 1/4" square driver.
J-sews' blades were a great idea but my plan is to allow non speSmurfpillsed tools, blades and bits to be used which could be bought from any hardware store so only a multitool and adapter need to be carried.@Grant Lamontagne said:
Both of these guys are loyal plier people, so I think we are good with them posting here.
It looks like a great design so far, but I'm looking at it on my phone so I don't have anything constructive to add at the moment.
DefThanks Grant, i tried to make sure this thread was in the right spirit for this sub-forum.
@Nhoj said:
It has no name but I can think of plenty of adjectives to compliment it!Thanks Nhoj......i think. My idea was to call it the 'Blade SAWted' but i suspect that's rubbish.
-
-
-
-

-
-
-
-
-
I'd say that such a name implies the ability to store blades as well so yeah it's a Picard facepalm from me on that one as well i'm afraid.
@Rorschach said:
How about the blade clip?Looks awesome anyway, I want one

Interesting, but i'd go more towards 'saw' rather than 'blade' so perhaps 'Saw Clip' or 'Jigsaw Clip'.
Thanks hopefully we can make it work.
Good idea, a clever design that doesn't require extra tools to replace the blades.
The problems as i see them though are a thread that fine will be hard to print and the lanyard ring attachment will most likely bent under sawing stresses as it's made of quite thin steel. The attachment point on the prototype is thicker than the lanyard ring as it makes use of all available space inside the multitool which the lanyard ring does not.Thanks, i suspect this project is right up your street.
Right onto the update....
The pictures above show what appears to be a fully working prototype and to some extent that is true, in that the concept has been proved to be sound and that 3D printing can achieve the desired detail and accuracy (caveat to follow).
However i've cheated a little bit, the jigsaw blade cavity is slightly too small so i trimmed down the blade itself to allow it to fit. I suspected this would be the case as working out the material shrinkage factors of internal cavities is always very difficult with 3D printed object, but after a bit of measuring i can just correct the model slightly and it should be fine there after.The threads were quite easy to tap and feel strong enough to do the job. The grub screws i had to hand were only 4mm long when i had designed for 6mm so that's why they are so deep into the holder.
As you can see from the picture i had to cut away some material from around the base and i also had to extent the locking slot out a bit, but again with these things taken account of on the model there is no reason why a run of jigsaw holders couldn't happen.
Price will be the issue though as the model printed in stainless steel costs 23 euros + postage and that's before the threads are cut, grub screws added and further postage is considered.
I can fettle the model slightly to try and bring the cost down by a euro or two but that's about it.@sawman said:
I love it! If this becomes available, I may just have to get another Wave and compliment it with one. SPLENDID work!

@gregozedobe said:
Looks very promising
Thanks guys, now that the Leatherman clip interface has been shown to be printable pretty much anything can be added to the other end, even the sort after plunger attachment
:sak: -
-

-
Nice work! Damn fine engineering.
sent from my mobile
-
-
Got nothing constructive to say about the design, except what a great idea!

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login







